Best Dual Exhaust Tailpipe Extension

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

[Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
[Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
Insert pipe spread tool into pipe, connect to existing drill, and expand.
Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
[Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
[Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
[Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.

Check Stock

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..

Check Stock

Dsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )

【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..

Check Stock

Crush Proof Tubing 3' Service Station Kit

CRUSHPROOF- Even the heaviest vehicles won’t smash it.
VERSATILE- Kit includes adapters so two hoses can be connected to make a longer length, can be set up for single or dual exhaust vehicles.
HEAVY DUTY- More heat resistant and flexible than standard hoses, withstands up to 600 degrees F.
GREAT FOR- use on passenger car tailpipes 2-1/2-Inches or smaller in diameter, or use a tailpipe adapter to fit with other pipe sizes.
SPECS- Kit includes (2) 3″ x 4′ FLT300 Crushproof Hose.
(1) RY30 Y-Connector for 3″ Hose (Rubber).
(2) F300 3″ Tailpipe Adapters with Hook & Chain.
(1) SP30 3″ Rubber Splice Connector – connects two lengths of hose.

Check Stock

Exhaust Tip 2.5 Inlet 6 Outlet 8 Long Black Coated inish Muffler Tip for Truck Tailpipe Stainless Steel Rolled Edge 2.5 inch for A6 Black Coating 2 Pair

2.5" ID EXHAUST TIP: 2.5" inlet diameter 6" outlet diameter 8" overall length, universal fits 2.5" outer diameter tailpipe..
MATERIAL: Made of stainless steel to protect the existing tailpipe from corrosion and deformation. Black coating prevents rain erosion..
APPEARANCE: The pure and elegant black exterior can perfectly decorate your vehicle..
EASY TO INSTALLATION:welding is required for installation,perfectly decorate the exhaust pipe of your car..
NOTE: Only Fits 2.5 Inch Outside Tailpipe. Please check the size of your vehicles tailpipe before purchasing..

Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
Work in cramped spaces with one-handed....
BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
The head of the exhaust cutting tool won’t bend from....

Check Stock

BTSHUB Pipe Stretcher Kit, 28mm Exhaust Pipe Expander Stretcher Tool Set, 1-5/8 to 4-1/4 Inches, Expander Tool for Tail Pipe Tube

[Increase Engine RPM]: Expanding your tailpipe increases exhaust volume, which increases vehicle RPM to give you more power for your engine.
The Exhaust Hanger Tool easily expands pipes with ease,.
[Professional tools] The pipe stretcher kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Expanding your tailpipe increases exhaust volume, which increases vehicle RPM to give you more power for your engine.
Perfect for home DIY or professional auto shops..
[Easy to Use]: Simply lubricate all parts of the exhaust expander tool, attach sleeves as needed, insert pipe spreader into the pipe, connect to existing drill, and expand away.
Pipe might need to be warmed during winter months to prevent damage while using tube expander. Use a 1/2" or 3/4" impact wrench to save even more effort..
[Wide Application ]: Tailpipe expander kit great for all types of pipes, from aluminum to stainless steel.
The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4"..

Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.

Check Stock

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

Check Stock