Best Dremel Bit For Cutting Metal 2

Minatee 26 Pieces Diamond Cutting Wheel Set for Rotary Tool Including 20 Pieces 0.87 Inch Diamond Cutting Wheel 4 Pieces Mandrel and 2 Pieces Screwdriver for Wood Metal Rotary Tool

  • ★ SAVE MONEYT AND TIME: The cutting wheels set cuts down on the cost of operating on dremel rotary tool and is ideal for cutting, grooving and trimming wood, plastic, ceramics, metal and DIY production. These cutting wheels are compatible with dremel rotary tools as good as original. We use original dremel rotary tools to test this accessory kit. And the mandrels fit for most power die grinders or rotary tools & air tools..
  • ★ EFFICIENT AND SMOOTH CUTS: These rotary cutting wheels tool are made of high quality steels, diamond particles and fiberglass reinforced for strength and durability. The rotary cutting wheels tool kit includes.
Check Stock

10pc Diamond Tipped Drill Bit Set - 1/16, 5/64, 3/32, 1/8 - Drill Glass Stone - Fits Dremel

  • Twist drill bits for fine-detail drilling with the cutting power of diamond.
  • 10 bit set, two each in diameters 5/64″ & 3/32″ and three each in 1/16″ &1/8″.
  • Industrial diamond permanently brazed to cutting tip during manufacture.
  • Hardest drilling material available, cuts glass, stone, tile.
  • use with pin vise for hand drilling or Dremel-type rotary tool, power drill.
Check Stock

Dremel Max Life EZ506HP 1-12“ (38.1mm) High Performance Premium Metal Cutting Wheel , Blue

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability. Built to give you longer lasting, stronger performing, versatile accessories..
  • The Max Life EZ506HP Premium Metal Cutting Wheel is coated with super abrasive grit called cubic boron nitride (CBN) which provides maximum durability allowing the wheel to remain sharp longer, stay cool, and won’t shrink..
  • Lasts 20X longer than our Fiberglass Reinforced cutting wheels..
  • Ideal for cutting a variety of metals including stainless steel, nails, rebar, metal studs, threaded rod, copper, conduit, metal HVAC ducts, metal door jambs, and galvanized strut..
  • The Dremel EZ-Lock is the first patented system of its kind making accessories changes 6X faster compared to using a standard mandrel. Accessory changes are quick and easy by eliminating the need for a screw and a screwdriver..
Check Stock

Diamond Cutting Wheel 10PCS 1/8 Diamond Cutting Discs Cut-off Wheel Blades Set Comepatible with Dremel Rotary Tool by Oudtinx

  • Designed for Dremel Wen ect. Rotary Tools .Turn your Dremel or other rotary tool into high-speed cut-off saw & grinding machine.
  • Steel wheels have 200-grit industrial diamond permanently brazed to surface.
  • Hardest cutting/abrasive material available for use with glass, tile, stone - even hardened steel.
  • Shank Diameter:3.00mm, Wheel diameters 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/2".
  • includes bit holder case with clear cover.
Check Stock

Amazon Basics Oscillating Multi-Tool Quick Release Saw Blades,15-Pieces

  • Professional design: 15-piece set of oscillating quick-release saw blades for cutting wood, plastic, metal and more.
  • Set includes: 3-piece of 3.5 inch HCS half moon saw blades, 3-piece of 1.375 inch HCS Japanese tooth , 3-piece of 2.69 inch HCS blades, 3-piece of 1.75 inch extra-long BIM blades, 3-piece of extra-long 1.375 inch HCS blades.
  • Durable quality: Made of thick gauge alloy steel， specially treated for smooth cutting and longevity.
  • Special design for precision cutting: Built-in length markers with inch and centimeter measurements.
  • Universal Compatible System: Compatible with Fein, Bosch (old version without quick release system), Black and Decker, Porter Cable, Dremel, Chicago Tools Craftsman, Milwaukee, Dewalt, Makita, Skil, Rockwell and more.
  • NOT compatible with Fein Starlock, Bosch MX30 (Bosch MX30EC-31), Bosch Quick Release tools, and Dremel MM40/MM45.
Check Stock

Dremel Multi-Max MM20V-02 Cordless Oscillating Tool Kit with (2) Batteries

  • MULTI-PURPOSE TOOL: Do it all with the Dremel MM20V oscillating multi-tool. Ideal for home renovations that involves wood, PVC, metal cutting in addition to sanding and grout removal applications..
  • POWERFUL PERFORMANCE: Powered by a 20V MAX lithium-ion battery that delivers long-lasting performance to get the toughest jobs done. Switch between various speeds ranging from 10,000- 20,000 OPM to reach optimal performance and control with a variety of materials..
  • INNOVATIVE TOOL DESIGN: Features a compact front end to get into the tightest corners. The angled-bodied tool design provides continuous comfort & improved control when flush cutting..
  • QUICK ACCESSORY CHANGE SYSTEM: Innovative tool-less change for easy and secure accessory changes. No wrench required..
  • EASE-OF-USE: Separate On/Off switch retains speed setting for ease of use. Soft start gradually increases tool speed to keep you in control through the cutting journey..
  • WHAT'S INCLUDED: Multi-Max Cordless Oscillating Tool, (2) 2.0 AH 20V Max Batteries 20V Max Battery Charger, Dust Extraction Adapter, Storage Bag and 3 Swiss-Made Dremel cutting blades..
Check Stock

Dremel EZ406-02, EZ - Lock Starter Kit, 1 1/2-Inch (38.1 mm) Wheel Diameter, 5 piece Fiberglass Reinforced Cut-off Wheels and EZ402 mandrel included, Rotary Tool Cutting Disc Accessories

  • Cut-off Wheels are reinforced with fiberglass for increased durability to cut, trim and groove into a variety of metals including hardened steel..
  • Ideal for easily cutting or slotting bolts, screws or sheet metal, thin wood, ceramic and plastic..
  • Dremel EZ406-02 includes one EZ402 EZ - Lock mandrel and five EZ456 Fiberglass reinforced cut-off wheels..
  • The EZ456 Cut-off wheels last 2X longer than current fiberglass-reinforced cut-off discs..
  • Working diameter: 1-1/2" (38.1 mm), Blade Thickness: .045” (1.1mm), Blade Material: Fiberglas.
  • For use with Dremel EZ402 mandrel only. The Dremel The EZ-Lock is the first patented system of its kind, eliminating the need for a screw and a screwdriver.
  • Dremel accessories are also color-coded into usage categories, to find more Cutting accessories look the Red color code..
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

Dremel Max Life 9901HP 1/8" (3.2mm) Tungsten Carbide Rotary Carving Bit

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability. Built to give you longer lasting, stronger performing, versatile accessories..
  • The Max Life 9901HP Tungsten Carbide Carving Bit is coated in titanium nitride and is engineered to last 2X longer than the standard, non-coated Dremel 9901 carving bit..
  • The tungsten carbide bits can be used for more aggressive applications to shape, smooth, or grind hard materials such as metals, hardened steel, fire ceramics, cast iron, plastics, and hardwoods..
  • The cylinder shape of the carving bit allows for deep removal of material, cuts flat areas, round edges and makes stop cuts and v-cuts.
  • Ideal for projects like metal or glass engraving, stone carving, or removing flash from castings.
Check Stock

Dremel Multi-Max MM20V-01 Cordless Oscillating Multi-Tool Kit with (1) Battery , Grey

  • MULTI-PURPOSE TOOL: Do it all with the Dremel MM20V oscillating multi-tool. Ideal for home renovations that involve wood, PVC, metal cutting in addition to sanding and grout removal applications..
  • POWERFUL PERFORMANCE: Powered by a 20V MAX lithium-ion battery that delivers long-lasting performance to get the toughest jobs done. Switch between various speeds ranging from 10,000- 20,000 OPM to reach optimal performance and control with a variety of materials..
  • INNOVATIVE TOOL DESIGN: Features a compact front end to get into the tightest corners. The angled-bodied tool design provides continuous comfort and improved control when flush cutting..
  • QUICK ACCESSORY CHANGE SYSTEM: Innovative tool-less change for easy and secure accessory changes. No wrench required..
  • EASE-OF-USE: Separate On/Off switch retains speed setting for ease of use. Soft start gradually increases tool speed to keep you in control through the cutting journey..
  • WHAT'S INCLUDED: Multi-Max Cordless Oscillating Tool, 2.0 AH 20V Max Battery, 20V Max Battery Charger, Dust Extraction Adapter, Storage Bag and 3 Swiss-Made Dremel cutting blades..
Check Stock