Best Dom Ide Male Connector

Cablecc 15Pin SATA Male Power Cable to Molex 4-pin IDE Hard Disk Drive Power Adapter

  • CY 15Pin SATA Male Power Cable to Molex 4-pin IDE Hard Disk Drive Power Adapter.
  • This adapter is used for connecting a SATA power connector of the power supply to standard IDE 4-pin Hard Drive or Optical Drive..
Check Stock

ZRM&E SATA 15-Pin Power Adapter Line Large IDE 4P Male to 5 SATA 15 Pin Female Power Extension Cable Splitter IDE to SATA Connector

  • SATA 15-Pin Power Extension Cable, Power Cable Adapter.
  • Connector B/C/D/E/F: SATA 15 Pin Female Plugs.
  • Suitable for 3.5 Inches SATA Hard Disk and 3.5 Inches SATA CD-ROM.
  • Package: 1pcs x Large IDE 4P to 5 SATA 15 Pin Power Extension Cable Connectors.
Check Stock

Molex Splitter 4 Pin IDE Power Supply Extension Cable 1 to 3 Y Splitter 6.7 inch

  • Compatible with all IDE hard drives or other devices (CD/DVD-ROM drives etc).
  • Two or three devices can be connected at the same time through a single interface.
  • Connector 1: 1 pcs molex 4 pin male power connector.
  • Connector 2: 3 pcs molex 4 pin female power connector.
  • Please confirm whether the PSU meets the maximum power consumption of the increased device before use.
Check Stock

WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD

  • Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
  • Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
  • The IDE interface is a 44-pin/2.0mm male connector..
  • The SD card can become an OS and application software that can directly start the device.
  • Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
  • Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
  • Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
Check Stock

AITIAO 2Pcs SD Card to 2.5 Inch IDE Adapter SD SDHC SDXC MMC Memory Card Converter TF Memory Card to IDE 44Pin Male Adapter to Laptop HDD for DOS/Linux/Windows 98SE, Me, 2000, XP and for Vista.

  • The SD Card to 2.5 Inch IDE Adapter Adapt SD/MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error..
  • Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk.Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • IDE Adapter supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm..
  • Attention: This SD Card to 2.5 Inch IDE Adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock

GODSHARK SD Card to 2.5 Inch IDE Adapter, SDHC SDXC MMC Memory Card Converter to Laptop HDD 44 Pin Male PATA Port

  • Adapt SD/MMC flash memory card to a super compact, cost efficient, anti-shock, low power consumption, no acoustic noise and fast access time HDD.
  • Enables SD/MMC card as a normal IDE 2.5" hard disk.
  • Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm.Attention: This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock

SATA Power Cable Adapter 3 Pack SATA 15 Pin Male to Molex LP4 Female Power Cable 8-inch

  • SATA Power Cable Adapter can be SATA power supplies to power IDE hard drives.
  • SATA 15 Pin Male to Molex LP4 Female Power Cable Provides 8" in cable length.
  • SATA to LP4 Power Cable Adapter SATA 15pin revolution 4pin power cord..
Check Stock

AcomData Samba 3.5��� USB 2.0 (PATA-IDE/ SATA) Hard Drive Enclosure Kit, Radiant Red (SMBXXXU2E-RD)

  • ...can easily connect your hard drives through a USB port as an additional external hard drive to read& backup data, operate formatting hard drives, and transfer files.
  • HIGH-SPEED TRANSFER UP TO 5GBPS- SATA IDE to USB adapter Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1. It has a dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector, which you can get all your hard drives combo.
  • SUPPORT DRIVE HUGE CAPACITY UP TO 6TB: Designed to be lightweight and compact supports a hard drive capacity of Up to 6TB capacity. SATA to USB 3.0 adapter has a SATA III connector and two IDE connectors (40pin and 44pin). we Provide a 4pin power cable for a 3.5″ IDE drive, Tips: Some IDE hard drive is old, you need to set a jumper to turn on the disk(set the master disk and the slave disk).
  • WIDE COMPATIBILITY: Hard drive adapter support hot-swapping. universally compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP, Mac OS 9/ 10, Linux.
  • work with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc. (When connecting two IDE hard drives, please set the master drive and slave drive based).
  • COMES WITH 12V 2A POWER ADAPTER- USB 3.0 to IDE SATA adapter included 12V2A AC power supply, 4pin power cable is designed for a 3.5’’ IDE drive.
Check Stock

CERRXIAN SATA Female to 40 pin Male 3.5 inch IDE Adapter for PC to SATA Hard Drive Interface Adapter

  • One Female SATA 7+15pin port, one 3.5Male PATA port (40-pin IDE), and one 4-pin Molex power connection Adapter.
  • SATA Female to 40 pin Male 3.5 inch IDE Adapter allows you convert hard drive interfaces to work with newer/older systems..
  • Converts Parallel ATA(PATA, ATA, IDE) to Serial ATA (SATA) Converts SATA to PATA/ATA/IDE/EIDE..
  • Package: Sata to Pata Interface Adapter x1..
Check Stock