Best Diy 3d Printer Under 500

FYSETC 3D Printer Parts and Accessories Limit Switch Mechanical Switch Module Endstops with 3 Pins 39.4 inch Cable for Ramps RepRap Tev Tornad- 3 Pcs

  • Original Tornad 3D Printer Parts, Optical Endstop switch with 1M Photoelectric Light Control.
  • Endstops for 3D Printer: used for Tev, if you want to in all crealty 3D Printer, CR -10 CR 10S S4 ,S5, please research another item: B07ZCSXNF3.
  • Must 3D Printer Limits: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Warm Tips: Generally, the printer DIY system need at least three optical switches.
  • What you get? 3Pcs endstop with connect cables.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm White ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm White ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: White - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

FYSETC 3pcs Ender 3 Limit Switch Mechanical Endstop Module 3D Printer Part for CNC RepRap Makebot Prus RAMPS 1.4 Board Ender 3/Pro Ender 5 CR-10 S4 S5 Series

  • 3D Printer Accessories Limit Switch 3Pin N/O N/C control, replacement for Ender-3/CR-10/CR-10S/CR-S4/CR-S5/CR-10S Pro, Ender-3/Ender-3 Pro 3D printer..
  • Optical Endstops switch with 1M Photoelectric Light Control.
  • DIY Must-have 3D Printer switch: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Maximum voltage: 125V, Maximum current: 1A. Size: 1.0x0.8 x 0.3in/2.6 x2 x 0.7cm. Small and compact size, easy installation, just plug and play.
  • What you get? 3Pcs endstops no include cables. Generally, the printer DIY system need at least three optical switches.
Check Stock

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

Twotrees CNC Controller Kit with Nema 23 Stepper Motor,TB6600 Stepper Motor Driver,GRBL CNC Shield Board，Switch Endstop-6.35mm

  • Newest CNC Shield Expansion Board V3.0 ---CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for....
  • More Compatibility Possibilities---It's a DIY kit with tons of possibilities. This complete CNC kit is GRBL compatible and has all the essential....
  • Premium Quality --- Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • Professional 3D Printer CNC Kit --- This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • Package Included:---1* CNC V3 ，1* Control Board ， 4* TB6600 ， 4* Limited Switches ，4* 23HS5628 Motor with 30cm wire (8mm/6.35mm Shaft....
Check Stock

BBLIFE 22 Colors 1.75mm ABS 3D Printer/Pen Filament Refill, Each Color 3.5M, Total 77m ABS Printing Filament Sample Pack, Widely Support for All 1.75mm 3D Printer/3D Pen, Not Support for 3Doodler Pen

  • 22 Beautiful Solid ABS Colors: It Include All Basic Beautiful Solid ABS Colors, It’s Great Filament Sample Pack for FDM 3D Printer Test and 3D Pen Draw. 22 Beautiful Colors Meet Most Colors Printing Requirement, It's Great Gift to Creating Designs and Arts by these Beautiful Material, To Make Your 3D Printing and 3D Drawing with Great Fun and Fantastic.
  • High Quality: Pure High Quality Raw Material, Bright Colors, High Precise Diameter Controlled, Support for FDM 3D Printer and 3D Printing Pen Smooth Printing Very Well, It's Much More Safe and Healty to Use by Everyone, It's Great Gift for 3D Printing and Draw Hobby.
  • Widely Compatible: This ABS Filament Sample Pack Perfectly Support for all 1.75mm FDM 3D Printer Very Well, and It Support for 1.75mm 3D Printing Pen, Great Sample Pack for 3D Pen / 3D Printer But It Not Support For 3Doodler Pen.
  • Package & Great Printing: 22 Colors, Each Color 3.5m, Total 77m ABS Filament Refill.
  • 3D Printing and DIY Art Lovers will Have Great Fun in Crafting and Drawing by this ABS Material Pack, To Print Bright Colors Item as You Like, High Quality of Printing Smoothly with 3D Printing Pen and 3D Printer, 3D Drawing Experience Wonderfuly.
  • Warranty and Satisfaction Guarantee: Premium Quality Controlled, If Any Question, Pls....
Check Stock

12 Pcs 3D Printer Heatbed Parts Silicone Leveling Solid Bed Mount Heat Resistant 3D Printer Parts Heat Buffer Silicone Heat Bed Parts Compatible with CR-10 Ender 3 Bottom Connect (Brown, 0.7 Inches)

  • Ample Amount: the package contains 12 pieces of 3D printer heatbed parts in brown, which are designed to replace your springs under the heated bed, sufficient quantity can meet your daily use and replacement needs.
  • Silicone Material: the 3D printer bed mounts are made of quality silicone material, stable and flexible, with nice heat resistant feature, can nicely reduce the vibrations when working, providing good leveling performance for your 3D printer.
  • Compatibility: the silicone bed leveling mounts are compatible with CR-10 and Ender 3 series 3D printers, they will install effectively and stably on your 3D printer, will not easily move.
  • Suitable Size: the heated bed mount measures approx. 4 mm/ 0.16 inches in inner diameter, 18 mm/ 0.7 inches in height, which is easy to level your 3D printer and remain your set levels.
  • Simple to Store: with compact size and lightweight, the 3d printer parts are easy for you to store in your tool box, occupying a little space, also very convenient to take out when needed.
Check Stock