Best Distribution Box Cable Optical

192KHz Digital to Analog Audio Converter, Xafissy Optical to RCA Converter with Optical Coaxial Cable 3.5mm Jack DAC for TV DVD PS3 Amp Receiver Speaker

  • 【Material】Our updated DAC converter made of aluminium alloy material has anti-Interference functionalloy, more stable in transmission and does not generate Heat, making it more durable and extended service life..
  • 【Multi-Point Connection】Optical to 3.5MM converter supports uncompressed 2.1-channel PCM or LPCM digital audio signal output, will not supports 5.1 channel Dolby sound. Good Anti-Interference function makes the sound pure and clear..
  • 【Easy To Install】 The converter is easy to use, just plug and it will automatically detect the audio signal to work immediately. Connect the Optical or Digital Coax output of HDTV, TV Box and other devices with this digital to analog audio converter, then RCA L/R or 3.5mm Jack output on the other side with your headphone or stereo speaker..
  • 【Wide Compatibility】This digital to analog adapter is compatible with devices with RCA or 3.5mm jack input, including the receiver, speaker, AV Amps, old sound system, Bose, headphones. And devices with optical and coaxial output such as TV, Xbox, Blu-Ray/DVD Players, TV Box, etc..
  • 【Package Includes】1 x Digital to Analog Audio Converter, 1 x Toslink Cable (Optical cable), 1 x USB Power Cable (Power Adapter is Not Included), 1 x User Manual. (This optical digit....
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • ...le outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
  • Anti-Interference module design with advanced noise filer built in. -20 dB Output/Inpu....
Check Stock

Fiber Optic Drop Cable Stripper for FTTH Drop Cables (Stripping Plier for Rubber-insulated Optical Cable) and CFS-3 Fiber Optic Stripper ( 3 Port Hole Fiber Optic Stripping Tool ), Fiber Tool Kit

  • 【FTTH Cable Striping Plier】The blade is sharp, which can easily strip the thread. It will not damage the optical fiber core when stripping the outer cable. The blade is not exposed, and it can prevent blunt objects from colliding with the blade and causing damage to the blade. It also can prevent the blade from scratching the user. 2.4-inch scale ruler, which is clear to ensure the accuracy of the peeling length. You can choose the peeling length you need. Easy to use, increase work efficiency..
  • 【FTTH Cable Striping Plier Applicability】Adaptive range: Indoor 3mm (W) * 2mm (H) optical cable.
  • Adaptive optical fiber: 1/2 core optical fiber.
  • Adaptive coating diameter of optical fiber: Φ0.25mm & Φ0.9.
  • Adaptive cladding diameter of optical fiber: 125μm..
  • 【CFS-3 Fiber Optic Stripper】 For stripping 250 micron buffer coating from 125 micron optical fiber,All stripping surfaces are manufactured to precise tolerances to assure clean,smooth strips. Precision Diameter Hole & V-Opening in Blade allow for accurate buffer coating removal,Every fiber stripping tool is tested after production to ensure a consistent high quality cut out of the box..
  • 【CFS-3 Stripper Three-port design】Hole (1) 2 - 3 mm fiber jacket cuts down to the 600 - 900 micron buffer....
Check Stock

Amalink 3 Port Optical Switcher Splitter 3 in 1 Out , with 1 Way Spdif Toslink Optical Splitter/ IR Remote Control Optical Switcher Splitter, 3 Port Spdif Toslink Optical Switch

  • 1.[3 in 1 out Toslink Optical Switch] Three ways of optical fiber signals switch to one sets of SPDIF/TosLink signal receiving device. Support PS3, PS4, Blu-ray Player, Cable box, HDTV, Sound bar, AV Receiver or Amplifier..
  • 2.[Remote control, plug and play] The input control can through IR remote control and also can directly press the button.Remote Control Distance Up to 3m..
  • [Support Audio Format] LPCM2. 0/DTS/Dolby-AC3, 32KHZ,44.1KHZ,48KHZ,96Khz,192KHZ. It does not support 7. 1CH Dolby Digital Plus, Dolby TrueHD, because 7. 1CH audio cannot be transmitted via fiber optic cable and must be transmitted over HDMI cable..
  • [Long Distance Transmit]Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m(130ft), LED status indication, No loss of quality..
  • 5.[Aluminum Alloy Material]Optical Audio Splitter Make of Aluminum Alloy for Sturdy and Anti-interference, Over-voltage Protection can Prevent the Damage Caused by Connecting Unmatched Power Adapter..
Check Stock

Grayrabbit 3 Port Optical Switcher Splitter 3 in 1 Out, with 2 Way Spdif Toslink Optical Splitter/IR Remote Control Optical Switcher Splitter, 3 Port Spdif Toslink Optical Switch

  • 1.[3 in 1 out Toslink Optical Switch] Three ways of optical fiber signals switch to one sets of SPDIF/TosLink signal receiving device. Support PS3, PS4, Blu-ray Player, Cable box, HDTV, Sound bar, AV Receiver or Amplifier..
  • 2.[Remote control, plug and play] The input control can through IR remote control and also can directly press the button.Remote Control Distance Up to 3m..
  • 3.[Support Audio Format] LPCM2. 0/DTS/Dolby-AC3, 32KHZ,44.1KHZ,48KHZ,96Khz,192KHZ. It does not support 7. 1CH Dolby Digital Plus, Dolby TrueHD, because 7. 1CH audio cannot be transmitted via fiber optic cable and must be transmitted over HDMI cable..
  • 4.[Long Distance Transmit]Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m(130ft), LED status indication, No loss of quality..
  • 5.[Aluminum Alloy Material]Optical Audio Splitter Make of Aluminum Alloy for Sturdy and Anti-interference, Over-voltage Protection can Prevent the Damage Caused by Connecting Unmatched Power Adapter..
Check Stock

Cablecc Dual Port Toslink Digital Optical Audio Splitter Adapter Fiber Optic Audio Cable 1 in 2 Out Black

  • CY Dual Port Toslink Digital Optical Audio Splitter Adapter Fiber Optic Audio Cable 1 in 2 Out Black Color.
  • 2port Toslink Digital Optical Audio Splitter Adapter Fiber Optic Audio Cable 1 In 2 Out.
  • It allows you to connect one toslink optical digital audio source and split into two different receiving devices such as a A/V receiver and a television.
  • Ideal for connecting your CD player, DVD player, or other digital audio source to both of your receiver and recorder.
  • 24k Gold Connectors, 1mm low-loss core, low-jitter synthetic fiber and heavy metal connectors to dampen vibration, giving you the ultimate listening experience.
  • Digital optical One divides into two Splitter for CD/DVD PS3 X-Box360 Computer..
Check Stock

Digital Optical SPDIF Audio Extender Over CAT5/CAT6 Cable Kit

  • Cost-effective solution for extending the digital S/PDIF audio using single low-cost Cat5e or Cat6 cable for up to 500 feet or 150 meters away from....
  • Send your Dolby 5.1 or DTS surround sound audio over cat5/cat6 cable for long range setup. Audio transmitted digitally with no signal loss..
  • Digital audio S/PDIF performance sampling rate 96 kHz. Dual digital audio inputs: 1 optical input and 1 coaxial input..
  • Works with all industrial grade Category 5/5e/6 cables. Clear digital audio sent over long distance as if connected locally with no loss on the sonic....
  • Make out-of-the-way connections for further distribution and integration. Unit can be powered through the supplied DC adapter or optional USB....
Check Stock

Whizzotech Coaxial to Toslink Optical Digital Audio Converter 24bit/192K HD Sampling

  • You can plug your Digital Audio Coax in and get Toslink Digital Optical Out. This can transform a digital RCA Coaxial (S/PDIF) audio signal to a....
  • This audio splitter works with all digital audio device such as HDTV, Blue-ray DVD player, HD cable box, Ps3, HD receivers, home theater systerm and....
  • Simply plug the power supply, connect the optical toslink (Coax) cable betweer the optical (Coax) audio source/the end receving devices and the setup....
  • Used 24-bit audio DSP, 96KHz Digital recivers, 24bit ADC, supports all S/PDIF digltal audio transmission for uncompressed PCM, LPCM, Dolby AC-3, Dolby....
  • This product will NOT convert ANALOG AUDIO (typically Left&Right-Red and White RCA audio to the Digital Audio Format).
Check Stock

Stellar Labs 3x1 Toslink Switch Digital Optical Audio Switch Splitter with IR Remote Control, 3 Port Hub Box Selector Combiner, SPDIF Switcher 3 in 1 Out

  • 3 IN 1 OUT AUDIO SWITCH – The Optical Audio Switch allows the user to connect three (3) digital optical Toslink sources to one (1) Toslink optical output..
  • AUDIO FORMAT SUPPORT – This 3×1 Toslink Switch supports all digital SPDIF audio formats including Dolby digital & DTS 5. 1, Dolby digital Plus.
  • support PCM stereo 32kHz, 44. 1kHz, 48kHz and 96kHz.
  • REMOTE CONTROL & MANUAL SWITCHING – Plug & Play, Input can be Selected via IR Remote Control or Button on the Switch. Supports PS3, PS4, Blu-ray Player, Cable box, HDTV, Sound bar, AV Receiver or Amplifier..
  • OVERLOAD PROTECTION – Digital Optical Audio Switcher features Over-voltage protection can prevent the damage caused by connecting an unmatched power adapter to the machine..
  • LONG DISTANCE SIGNAL TRANSMISSION – Transmission output distance is up to 40m/130ft via optical Toslink fiber cable that losses less than 0.2dB/m, sampling frequency up to 96 KHz..
Check Stock