Best Direction Control Valves

Lisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool

  • Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
  • Smallest size also works on automatic adjusting air suspension systems for automobiles.
  • Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
  • Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
  • Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
  • Set comes with five popular sizes: 1/8"-5/32.
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

Moen U362CIS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with CC/IPS Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

Moen U362XS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with Crimp Ring PEX Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

Litorange 2 Pack Heavy Duty Brass Replacement Control Needle Valve 1/4\ Male NPT X 1/4\ Female NPT Connection

  • ★ Needle Valves are designed to regulate flow to an instrument or other industrial application. They are rugged enough for the oil & gas market, and suitable for most industrial applications..
  • ★ It can be used to open and close the propane. If you need a long time and stable control, it would be better to use with a regulator..
  • ★ The flow works in either direction. If it leaks, you can replace the O ring inside with pliers, or a bit of Teflon tape is recommended for sealing on both end..
  • ★ Working Pressure: Rated to 600 PSI. Temperatures range from -4 to 450 F..
  • ★ Package include: 2 PCS 1/4" Female * 1/4" Male Needle Valve with 4 PCS Silicone O ring. It comes with 1 year warranty. Any Problems just contact us to resolve..
Check Stock

Moen U232CIS M-CORE 3-Series Mixing 2 or 3 Function Integrated Transfer Valve with CC/IPS Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Check Stock

VEVOR Transmission Fluid Pump 2 Way Manual ATF Refill System Dispenser Oil and Liquid Extractor 10 Liter Large Capacity Automatic Transmission Fluid Pump Tool Set with 14 Pieces ATF Filler Adapters

  • 10L Large Capacity: Our pneumatic ATF pump has a 10L large capacity. It provides an easy way to extract and dispense transmission fluid quickly and cleanly. It's an ideal tool for oil replacement..
  • GREAT COMPATIBILITY: The fluid transfer pump comes with 14 common adapters that fit a variety of automobiles, including famous cars like BMW, Porsche, VW, Honda, Audi and many others..
  • Dual Control Mechanism: The fluid pump's dual control system with two-way valves (blue screw knob and flow direction valve) allows easy conversion between oil extracting and dispensing..
  • Ultra-secure Design: It includes a gauge for pressure monitoring and a releasing valve ( preset 43PSI ) to release pressure when it is overloading, this eliminates any potential threats at work..
  • Corrosion Resistance: Our transmission fluid pump is made of corrosion-resistance material, and it can withstand high pressure and also easy to wash..
Check Stock

Moen UTS2611 Doux Collection M-CORE 3-Series 2-Handle Shower Trim with Integrated Transfer, Valve Required, Chrome

  • VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating style.
  • VALVE REQUIRED: This trim kit requires M-CORE Mixing Valve with Integrated Transfer Valve U232 or U362, with preferred installation option, to complete installation.
  • FOR USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Check Stock