Best Din Rail Timer

Electrodepot 24 Hour 7 Day Pool Pump Timer & Contactor 30A 3 Pole, Time Switch, for Operation 120VAC 40AMP

  • Electronic timer with 16 time schedules, 3 Year Battery backup.
  • Supplied with a DIN Rail Operation: 120VAC.
  • For Pumps, Water heaters, Lighting, Motors, Valves, Irrigation..
  • 3 Pole 30 Amp SPST contactor, rated 600V, coil 120V.
  • To-the-minute programming for accurate load control and reduced energy costs.
Check Stock

Baomain DDS238-4 （30-100）Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

  • Rate Voltage:220V 230V 240V Rate Current:30(100A).
  • 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
  • Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
  • Accuracy Class:Class 1 Starting Current:0.4%lb.
  • 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock

StarTech.com 1 Port RS232 to Ethernet IP Converter / Device Server - Aluminum - Serial over IP Device Server - Serial to IP Converter (NETRS2321P)

  • ACCESS YOUR SERIAL DEVICES REMOTELY: Use this RS232 to Ethernet IP converter to connect to, configure and remotely manage an RS232 serial device over an IP network.
  • DURABLE CONSTRUCTION: Built with a rugged aluminum housing, this serial to IP Ethernet device server delivers a reliable performance that can be used in almost any environment.
  • FLEXIBLE INSTALLATION: This serial to IP converter can be mounted to a surface or on a DIN rail with the built-in mounting bracket and included DIN rail clips.
  • Access a serial device from anywhere with an IP-based connection.
  • Mount on DIN-rails or on a wall with the attached mounting brackets.
  • Suitable for hash environments with a rugged, aluminum enclosure.
  • Configure via web browser or Virtual Com software interface.
  • Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP.
Check Stock

Digital Programmable Timer Relay, DC 24V 30A Weekly 12/24hrs Timer Switch, LCD On Off Control Programmable Time Relay, On & Off Digital Timer Switch, Built-in Battery CR2450

  • 【LCD&LED Indicator】Digital Timer Digital Programmable Timer Relay has LCD digital display, LED indicator, reading is more intuitive and clear..
  • 【16 ON/OFF Programs】 16 ON/OFF programs per day, 15 combinations to a week. Repeat programs with 16 on/off settings, and setting on/off manually..
  • 【24 hours / 7 days a Week Programmable】 DC 24V 30A Weekly 12/24hrs Timer Switch supports 24 hours / 7 days a week programmable. With countdown function, maximum 24 hours countdown to OFF..
  • 【Built-in battery CR2450 】 Large capacity built-in battery CR2450 for back-up the memory (save the programs you set) when power failure..
  • 【Easy to Use 】35mm DIN rail mounting, easy to operate, great for household use..
Check Stock

50 Amp 4 Pole Contactor Normally Open (N/O) 120V Coil, 32A Motor, IEC 63A, 60A DIN

  • Normally Open (N.O.) main contacts Power status indicator.
  • 110/120VAC Coil: 52VA inrush, 10VA sealed.
  • Overall Size(Approx.) : 60 x 55 x 67mm / 2.4" x 2.2" x 2.7"(L*W*T).
  • DIN rail included, Compliance: CE, and IEC/EN61095 DIN.
Check Stock

CZH-Labs DIN Rail Mount 12V Passive 2 SPST-NO 30Amp Power Relay Module.

  • DIN Rail Mount Passive 2 Channel SPST-NO 30 Amp Power Relay Module..
  • High quality DIN rail mount carrier, can support width 35mm /32mm / 15mm rail..
Check Stock

CZH-LABS RPi Screw Terminal Block Breakout Module with Aluminum Enclosure for Raspberry Pi 1 2 3 Model B/B+

  • RPi Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend Raspberry-Pi projects to industrial....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
  • Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
  • Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
  • Packing list: 1x Terminal Block Board, 1x Aluminum enclosure(top and bottom covers), 2x DIN rail adapter Bracket, 4x Brass standoff, 5x M3x4mm Flat....
Check Stock

120VAC Din Rail Mounted Motor Contactor (100-C09D10)

  • Rated for 9A. Used only with Rockwell 193-T1A System Overloads..
Check Stock

Rollon TEX45-1520 X-Rail 45, 1520mm Length

Check Stock