Best Din Rail Ground Terminal

Hubbell TD1000 Digital Display Module

  • Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
  • Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
  • Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
  • High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
  • High quality glass fiber FR-4 PCB, top and bottom dual copper layers..
Check Stock

CZH-LABS Screw Terminal Block Breakout Module Board for Arduino MKR.

  • DIN Rail Mount Pluggable 8x3 Position 10A / 300V Screw Terminal Block Distribution Module..
  • Input terminal: Screw terminal block, pitch 5.0mm/0.197.
Check Stock

CZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.

  • Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

Electronics-Salon 20 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC /0.84A, No load 27.6VAC..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min 5mA. no-load loss less than 1.2 watt. Insulation grade: grade B. Temperature rise: less than 28C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
Check Stock

Electronics-Salon 5 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC / 208mA, No load 28.8VAC..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min. No-load current less than 20mA, no-load loss less than 0.5 watt. Insulation grade: grade B. Temperature rise: less than 22C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
Check Stock

Electronics-Salon DIN Rail Mount AC/DC 24V Control 8 SPDT 16Amp Pluggable Power Relay Module, G2R-1-E

  • OMRON G2R-1-E industrial power relays, switching current up to 16A at 250VAC (or 30VDC), and easy to replace pluggable relays..
  • LED indicator for each relay channel , relay coil protection by means of a freewheeling diode..
  • High quality screw terminal block, FR-4 fiber glass PCB, dual copper layers..
  • Panel mount or DIN rail mount versions are available. Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
Check Stock

CZH-LABS DIN Rail Mounting Carrier Housing with Prototype Board PCB Size 20.3mm x 73mm.

  • PCB Dimensions: 20.3 x 73mm. Thickness : 1.6mm. Material : FR-4 (glass fiber). All holes are plated through, top and bottom solder pad are identical..
  • CN1 and CN2 3Pin terminal blocks pin pitch 5.0mm/0.197", other pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
  • Terminal Block: Pitch 5.0mm/0.197" screw terminal blocks. Wire range 26 to 12AWG / 2.5mm square. Strip length 7mm / 0.28” Screws - M2.5, steel, Cr3+....
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier(not China low quality carrier), can support width 35mm, 32mm and 15mm rail..
  • External dimensions: L22.5mm x W78mm x H40.1mm.
Check Stock

CZH-LABS DIN Rail Mount 2 Ports Passive RJ45 PoE Power Injection Board Power Over Ethernet Injector Module.

  • Simple Power up 2 Passive 10/100Mbps PoE devices by one power source Application use for Access Points, IP cameras, IP phones, etc..
  • Power Input terminal block for all PoE power supply, each port serial a recoverable fuse(fuse value 1.1Amp / 72V). Power Expansion Output terminal....
  • Switch On/Off to save electricity while not use, LED indication for switch On/Off status..
  • Specifications: Terminal Block Power Input: 12VDC - 60VDC, maximum current 10Amp.
  • Termianl Block Expansion Output: maximum current 10Amp.
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

Electronics-Salon DIN Rail Mount 20 Position 30A / 300V Screw Terminal Block Distribution Module.

  • DIN Rail Mount 20 Position 30A / 300V Screw Terminal Block Distribution Module..
Check Stock