Best Digital Display Time Relay

4pcs Temperature Controller Module with Case W1209 12V DC Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with Waterproof NTC Probe

【W1209 Features】The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay.100% complete machine patch, wave soldering, stable performance, good consistency..
【Embedded CPU Chip】The XH-W1209 led display digital thermostat module embedded CPU chip (MCU), is more intelligent, lower power consumption.
Automatic power set memory, MCU built-in EEPROM memory unit..
【Temperature Controller Parameter】Temperature range: -50-110°C.
Control precision: 0.1 celsius.Input power (DC): 12V.
Output: 1 channel relay output, capacity: 10A.
【Waterproof NTC Probe】The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling.(The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin, which can protect the inside to prevent scratches.
And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.).
【Package Includes】4pcs W1209 12V DC digital temperature controller board with case.(Ps: The product is not assembled, if you need assembly instructions or if ....

Check Stock

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..

Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..

Check Stock

CGELE PID Temperature Controller Kit Voltage AC 100V to 240V Comes with SSR 40DA Solid State Relay, K Type Thermocouple Sensor, and Black Heat Sink

♥【What You Get】In this PID temperature controller kit,it include 1 x PID temperature controller,1 x solid state relay 40DA，1 x K type thermocouple，1 x heat sink..
♥【Product parameters】Power supply voltage:110-240VAC 50/60Hz.
working environment:ambient temperature: 0℃~50℃,relative humidity: 35%~85% (no condensation) ；storage temperature：-25℃~65℃（avoid ice or dew）；resolution：1℃，0.1℃（adjustable）；wiring method：terminals；accuracy：+0.5%FS.
installation environment:installation type ll, pollution grade 2 (IEC61010-1).
max current: 30mA, load resistance:≥1K..
♥【Feature】 Support 2 wire thermocouple input,1 way solid state relay output,1 way relay alarm output.
digital display of real-time and set temperatures,adjustable degrees ℉ and ℃..
♥【Size】The panel size of PID temperature controller is 48(W)mmx48mm(L),install hole size is 46(W)mmx46mm(L).Total size:48mm(W)x48mm(L)x76mm(H).
♥【Widely application】Widely used in chemical industry, medical industry, product industry, machinery industry, greenhouse farming, agricultural planting, etc..

Check Stock

POVTOR 6 Rocker Switch Panel with Control System Wiring Harness Toggle Switch Apollointech Compatible with Wrangler JK JKU 2007-2018

All In One Design: This innovative design switch panel control system includes fuse and relay, provides secure and easy mounting on your vehicle. You would be able to Install it on your vehicle in no time!.
Application: This switch panel pod compatible with Wrangler JK 2007-2018, other vehicles would need modification. Please verify that this 6 Rocker Switch Panel fits your vehicle before your purchase..
Safety Protection: Liquid crystal voltage display, monitor battery performance and a digital led voltmeter. This switch panel control box could power up to 6 pcs 5 inch - 50 inch LED work light bars & all types of LED spot&flood lights at the same time..
High Performance: This Switch Panel Kits are made of rugged aluminum with a long lasting black texture powder coating paint, 80A Power Relay & Maximum output: 300w, Great for running rock lights, off-road lights, back-up lights, air compressor and any LED lights you want!.
What You Get: 1 x 6 Rocker Switch Panel, 1 x Control Box with Wiring, 1 x Installation Instruction, Nice Customer Service. 12 months warranty, Lifetime after sales customer service support. If you have any questions, please feel free to contact us via Amazon email..

Check Stock

Timer Relay, Icstation Time Delay Switch AC 110V 120V Timer Switch Module Digital Time Cycle AC 85V-265V LED Display 0ms-999h

⏳Wide timing range: ICStation time relay delay is able to tolerate the widest timing adjusting range: 0-999S/ 0-999M/ 0-999H,it is available for various application.(Please Note: If the T1 time is second,the T2 time must be second. They can not achive T1 time is second and T2 time is minute/hour.).
⏳ Wide supply voltage range: Icstation timer relay supports AC85-265V. This device can support different work mode, If you are not clear the operation, please download the PDF user manual or Email us..
⏳Cycle Timer relay supports sleep working mode, which will turn off automatically after 10s(need to set ). It is also very easy to set parameter via 4 momentary keys..
⏳Parameter:Cycle Timer relay Support Voltage Input: AC85-265V, Maximum Power: .
⏳Application:The Digital timer delay can be used for timing, delay, cycle timing, intermittent timing occasions and so on, such as the descending machine DIY, timing switch, timing alarm control board. Kindly Tips: We have uploaded the user manual on the Amazon page at technical specification or under the IMAGE, please download it and read it before you use it..

Check Stock

CMTOOL Power Circuit Probe Kit 9-30V Automotive Circuit Tester, Test Light Automotive Relay Tester Kit, Car Electrical Tester Digital Voltage Tester Continuity Tester Tool with 6m/20ft Extension Cable

2.【Power Circuit Probe Tester with Fast Intelligent Test】Automotive circuit tester can automatically identify the voltage value, resistance value, and positive and negative polarity of the detected circuit (red light is positive, green light is negative)..
3.【Automotive Circuit Tester with Digital Multimeter Mode】Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bringing a lot of convenience to users..
4.【Electrical Tester with Oscilloscope Function】Circuit probe tester with 6M extension test lead, can display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc. Users also can observe the test results more directly by adjusting the displayed interval..
5.【Power Circuit Tester Kit with Component Activation Function】There is 4 activation modes for the component activation function of the automotive probe tester, which can generate "activation" signals for components, such as lights, motors, and other in-vehicle electronic devices..
6.【Power Circuit Probe Tester for Relay Test & Injector Test】Automotive relay tester function: able to test common automo....

Check Stock

[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller

【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc..
【Load Range】Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable)..
【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits..
【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up..
【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time..

Check Stock

DUNSI STC-1000 Temperature Controller Waterproof Sensor Heating Cooling LED STC1000 STC-1000 Digital Dual Relay Thermostat Incubator Aquarium 110 Volt AC 110V 2m Fahrenheit Temp Control

【HIGH QUALITY】DUNSI premium STC-1000 Digital Temperature Controller is made of high quality ABS heavy-duty and anti-flamming plastic shell material which can use for a long time.designed with compressor delay protection, it will alarm when temperature exceeds temperature limit..
【MAIN SPECIFICATION】DUNSI Digital Dual Relay Thermostat (110v) Keeps temperaure in desired range and guaranteed accuracy.Fully utilize the stc microcontroller and NTC probe to this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC)..
【OPTIMAL PERFORMANCE】DUNSI premium upgrade STC-1000 Temperature Controller has 2 Relays.Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time.No more frequently wirring change between heater and cooler. Every piece of our products is strictly inspected before sale..
【WIDE APPLICATION】DUNSI STC-1000 Dual Relay Thermostat Controller with 2m Waterproof probe can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, acceler....

Check Stock