Best Differential Pressure Gages

Differential Pressure Gauge, 0-1.0 Inches of Water

Differential pressure gauges indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential..
Dimensions: 4-3/4” dia. X 2-3/16” deep.

Differential pressure gauges indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential..
Dimensions: 4-3/4” dia. X 2-3/16” deep.

7.62 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. These rimless chambers require a slightly longer maximum headspace than commercial 308 Win calibers. The 7.62 NATO Headspace Gages do not conform to SAAMI tolerances..
MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015..
QUALITY ASSURED: Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference between the length of a standard cartridge, as represented by a gage, and the gun’s actual chamber length , when the head of the cartridge is flush against the bolt face..

Accurate Information: Patented dual indicator shows differential pressure drop and operating efficiency.
General protection with particle removal down to 1 micron, including coalesced liquid, water, and oil, providing a maximum remaining oil aerosol content of 0.1 mg/m3 (0.1 ppm) at 21°C (60°F).
Engineered to deliver low pressure drop throughout the life of the filter, reducing energy costs in your facility.
Patented dual indicator shows differential pressure drop and economical operating efficiency.
Smooth bore flow insert directs air into the filter element to minimize turbulence and pressure losses.

Measuring Range: -10.0 to 10.0 mm.w.c/-100 to 100 Pascals with 4 to 20mA Output.
Display: Integrated 4 Digit Red LED 7 Segment Display 0.5” | Sensors: Integrated High Speed Differential Pressure Sensor.
Maximum Over Pressure: 2 Times the rated pressure.
Alarm Type: Built in Buzzer Alarm for Process Violation Alert.
Size: Standard 4 ½'' (114.3mm.) Diameter.
Supply Scope: 1 Unit of Differential Pressure Gauge, 1 Unit of Adaptor, Silicon Tube, Mounting Screws, Instruction Manual and Calibration Certificate | Applications: Laminar Air Flow Cabinets, Clean Rooms, Bio Safety Cabinets and AHU's..

PRECISION MEASUREMENTS: Features a 2.25" diameter dial with 0.001" graduations.
EASY READINGS: Microfine graduations in black for 0-100 continuous readings and red for 0-50-0 balanced readings.
movement mounted independently from the case on a rigid supporting plate, ensuring perfect and permanent alignment.
MEASURING PRESSURE: Supplied with lug backs positioned in 90° increments.
Group II and III gages measure with approximately 2oz. of pressure.
DURABLE CONSTRUCTION: Spindle rack is made of hardened stainless steel and features a carbide ball contact point.
brass cases and hard brass gear wheels prevent wear.
pinions of steel hardened, tempered, and lapped on teeth.
HIGH-QUALITY TOOL: Features extra-long springs for uniform pressure through entire travel of spindle with a knurled bezel that easily adjusts 360°.
full 1-year warranty offered by Fowler High Precision.

Measures air pressure of the single pipe or differential pressure of 2 pipes. Has 11 selectable units of measurement kPa, psi, kgfcm2, ozin2, bar, mbar, inHg, mmHg, inH2O, ftH2O, cmH2O..
Best for measuring the ventilation and air condition systems. Widely used for gas measurement, calibration, and any troubleshooting of any gas pressure systems..
Max / minimum / Average reading record function.
Low battery display and Auto power off set up function.
Differential pressure measurement,Large LCD backlit dual display.

... NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference between the length of a standard cartridge, as represented by a gage, and the gun’s actual chamber length , when the head of the cartridge is flush against the bolt face..

This digital handheld manometers can measure the air pressure of the single pipe， or differential pressure of two pipes.it is suitable for measuring of ventilation and air condition systems,and widely use forgas measurement,calibration,and any trouble shooting of any gas pressure systems..
Ultra-low-power sensing & measurement with 32-bit MCU and 24-bit ADC make the measurement of air press faster and more accurately.Perfect for working on tankless heaters,Very handy to set gas pressures on electric valves,Using for service testing of gas pressure on domestic boilers, Measures Air Flow about your bathroom fan ect..
12 Selectable Units of Measure (kPa, Psi, Kgfcm2, Ozin2, Bar, mbar, inHg, mmHg, InH2O, FtH2O, cmH2O, Pa) with function: Data Hold and Error Code - Response Time: 0.5 Sec..
Ehdis digital manometer has Dual Input that can test / measure the differential gas pressure with its provided twin input probes.Max / minimum record function.
Data save function, also has room temperature future..