Best Die cutting Machinery

uxcell M2.5 x 0.45 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • ... steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel, 2pcs

  • ... torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead....
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

45 Pc Tap & Die Set Metric Mm Titanium Tungsten Steel Jumbo Thread Renew Tool

  • 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case.
  • Size:14.8 x 10.7 x 2.2"inch / 37.6 x 27 x 5.6cm. Weight:12lb / 5.4kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal.
  • SAE TAP SIZES and SAE DIE SIZES: 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18.
  • METRIC TAP SIZES and METRIC DIE SIZES: M3-0.5, M4-0.7, M5-0.8, M6-1.0, M7-1.0, M8-1.0, M8-1.25, M9-1.25, M10-1.5, M10-1.25, M11-1.5, M11-1.25, M12-1.75, M12-1.5, M14-2, M14-1.5, M16-2, M16-1.5.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
Check Stock

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

  • 110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
  • Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
  • 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
Check Stock

Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small Tapping Bits Tool

  • This tap and die set is made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel..
  • 86 piece tungsten steel set comes in an organized, rugged plastic storage case.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman.
  • Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock