Best Diamond Tool Segment

Delta Diamond Cougar HD 14 Inch 3-Pack Supreme Diamond Saw Blades.125 X 1"-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/Rebar, Masonry, Stone, Laser-Welded Segmented (14" 3-Pack)

  • SUPREME GENERAL PURPOSE - Cougar HD Supreme Concrete Saw Diamond Blades have laser-welded, extra tall 12MM hard bond segments which is perfect for general purpose cutting of reinforced cured concrete with rebar, masonry, brick, block, and stone..
  • USE WET OR DRY - The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. Use wet to keep dust down..
  • PROFESSIONAL USE - Unique segment design allows for better air cooling and chip deflection, resulting in better performance with less stress on the operator and machine. The 3/8" core holes are used as depth indication as well as cooling and dust/slurry removal..
  • SPECIFICATIONS - 3-Pack of 14" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 6,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY + FREE RETURN SHIPPING - All Delta Diamond Products, Inc. diamond blades, coring bits, hole saws a....
Check Stock

Delta Diamond Cost Cutter 6 Inch Segmented Diamond Blade, 7/8\-5/8\ Arbor, General Purpose Cutting/Grinding Concrete, Masonry, Stone, & Similar Materials (6\)

  • STANDARD GRADE - Standard grade diamonds deliver the best combination of cutting speed and tool life at a low cost per cut..
  • GENERAL PURPOSE - Use on a wide variety of materials such as concrete, masonry, brick, block, stone, and similar materials..
  • USE WET OR DRY - Heat-treated high-speed steel core is durable enough to withstand dry cuts. Use with water for increased performance..
  • SPECIFICATIONS - 6" diameter X .080 thick with a 7/8" arbor hole. Included is a 5/8" bushing for adapting to any hand-held grinder or trim saw. The maximum safe operating speed is 10,185 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Ripper Pro Premium 4 Inch X .500 Tuck Point Diamond Blade, 1/2 Inch Width, Mortar Removal, Grout Repair, Masonry, & Concrete Surfaces (4\ X .500)

  • FAST & EFFICENT MORTAR REMOVAL - Eat old mortar out fast with high cutting performance and long life..
  • PREMIUM DIAMOND CONCENTRATION - Higher levels of diamond concentration than standard blades give the best performance to cost per cut..
  • WET OR DRY - Use wet or dry for mortar removal, grout repair or preparing masonry and concrete surfaces..
  • SPECIFICATIONS - 4" X .500" wide, have a 7/8" arbor with a 5/8" bushing and will work with most hand-held grinders and circular saws. The maximum safe operating speed is 15,200 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

YALUSO Concrete Grinding Wheel 3Pcs 4-1/2' Double Row Diamond Cup Grinding Wheels, 12-Segment Turbo Row Wheel, Diamond Circular Blade Set for 4-1/2' Angle Grinder/Masonry/Granite/Marble/Concrete

  • Package Include: Our set includes 3Pcs 4-1/2" (115mm) grinding discs with 7/8" (22mm) abor hole, fit for 4-1/2" Angle Grinder. Includes 1 x 12-segment diamond grinding turbo row cup wheel, 1 x double row segment diamond grinding cup wheel, 1 x diamond circular blade for dry/wet cutting. Every disc comes with 2 types of silver rings (22mm to 16mm(5/8"), 22mm to 20mm), help you cope with different occasions..
  • Premium Diamond Material: Our grinding cup wheels are constructed of high concentration of diamond segment and precision stamping steel base plate, rust and corrosion resistant. Large diamond grind segment for more aggressiveness..
  • Exhaust Hole Design: The cup grinding wheels features air holes, designed to maintain and cool the cutting pattern and reducing wear.
  • Quick Grinding & Cutting: Provides with a fast cutting effect on masonry, stone, and concrete. High diamond concentration for long durability and aggressive material removal performance..
  • Diamond Saw Blade for Masonry: Turbo rim for smooth & fast cutting of masonry, concrete, pavers, terrazzo, roof tile. Universal for dry or wet cutting. Designed as thin kerf, it can increase the cutting speed while minimizing dust..
  • Wide Application: Our diamond grinder cup wheel is used for dry/wet grinding....
Check Stock

4.5 inch Circular Saw Blade, Firecore Segmented Diamond Saw Blade for Angle Grinder Dry or Wet Concrete Cutting Wheel Disc for Concrete Stone Brick Masonry Tile

  • SPECIFICATIONS: Firecore concrete saw blade has teeth with soldered diamond segments all around. Diameter: 4-1/2 Inch (115 mm).
  • Arbor: 7/8 Inch (22.23 mm) with 20 mm Adapter.
  • Segment Height: 0.276 Inch (7 mm). Suitable for Angle Grinders, Circular Saws, Masonry Saws, Tilesaw and Gas Cutoff Cutters..
  • FAST & SMOOTH CUTTING: Universal for dry or wet cutting. With Max 12,200 RPM, this diamond circular saw blade are produced specifically for use with general masonry materials such as concrete, roof tiles, stones, bricks and rocks..
  • INCREASED OPERATING TIME: Concrete blade for angle grinder heats up slower to prolong the operating time..
  • DURABLE: Made from high-quality superabrasive diamond, this cutting saw blade offers the best combination of cutting speed, long life and a low cost per cut..
  • WIDE APPLICATION: Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or work at your home studio, this circular saw blade tool is the perfect blade for you..
Check Stock

Delta Diamond Piranha Premium 10 Inch Tile Saw Diamond Blade, 5/8\ Arbor, Continuous Rim, Wet Cutting Porcelain Tile, Ceramic Tile, Stone (10\)

  • PREMIUM TILE SAW BLADE - Made with higher levels of diamond compared to standard blades to provide excellent cutting and performance on a wide range of materials. Use on porcelain tile, ceramic tile, granite, marble, slate, terrazzo, or any similar material..
  • MINIMAL CHIPPING - Thin .090 cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!.
  • EXTRA TALL RIM - 11MM tall to maximize blade life and prevent downtime during blade changes..
  • SPECIFICATIONS - 10" diameter X .090 wide X 5/8" arbor. Will fit any tile saw with 5/8" arbor shaft. Max safe rpm is 6,115..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Boss Hog 12 Inch Turbo Premium Diamond Blade for Masonry, Brick, Block, Pavers, Concrete, Stone, Wet/Dry Cutting, Continuous Rim (12\)

  • PREMIUM TURBO DIAMOND BLADE - Boss Hog Turbo diamond blades are high performance, fast cutting, and long lasting. Ideal for when you need to leave a smooth, clean finish. Cooling holes help keep the blade cool for continuous use for construction. Comparable to other major brands..
  • GENERAL PURPOSE CHIP FREE CUTTING - Use for general purpose cutting of concrete, masonry, brick, block, pavers, roofing tile, terrazzo, and all similar materials. Compatible with all masonry saws, hand-held gas or eletric power saws with 1" or 20mm arbors..
  • WET OR DRY - Guaranteed to withstand dry cutting. Won't warp or wear out prematurely. Designed for professional use..
  • SPECIFICATIONS - 12" diameter X .110 thick X 1"-20mm Arbor. The maximum safe operating speed is 6,300 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Boss Hog 14 Inch Turbo Premium Diamond Blade for Masonry, Brick, Block, Pavers, Concrete, Stone, Wet/Dry Cutting, Continuous Rim (14\)

  • PREMIUM TURBO DIAMOND BLADE - Boss Hog Turbo diamond blades are high performance, fast cutting, and long lasting. Ideal for when you need to leave a smooth, clean finish. Cooling holes help keep the blade cool for continuous use for construction. Comparable to other major brands..
  • GENERAL PURPOSE CHIP FREE CUTTING - Use for general purpose cutting of concrete, masonry, brick, block, pavers, roofing tile, terrazzo, and all similar materials. Compatible with all masonry saws, hand-held gas or eletric power saws with 1" or 20mm arbors..
  • WET OR DRY - Guaranteed to withstand dry cutting. Won't warp or wear out prematurely. Designed for professional use..
  • SPECIFICATIONS - 14" diameter X .110 thick X 1"-20mm Arbor. The maximum safe operating speed is 5,460 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Brick Boss 14 Inch Diamond Blade, 1\-20MM Arbor, Wet/Dry Cutting Brick, Pavers, Stone (14\)

  • BRICK CUTTING - Use Brick Boss diamond blades for cutting brick (up to 5,000 psi), most types of stone such as granite and quartzite and similar materials. Not intended for use on materials such as concrete, asphalt, concrete block or sandstone..
  • EXTRA WIDE U SHAPED SLOTS - Features 10MM tall diamond segments with deep and wide U shaped slots. The wide slots allow for better cooling and faster removal of the cutting debris, thereby increasing cutting speed..
  • HEAT TREATED HIGH-SPEED STEEL - The core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - Blade measures 14" diameter X .125 (1/8") thick with a 1" arbor hole and 20mm bushing for Stihl power saws. It can be used on masonry saws, hand-held power saws and bridge saws. Operating RPM is 2,500. Max. safe RPM is 5,460..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the d....
Check Stock