Best Detailing Brush For Brake Calipers

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

  • 【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time..
  • 【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
  • 【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
  • 【Comfortable And Durable】This brake....
Check Stock

BIGTUR Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates/2 pcs Hangers

  • Included: Brake piston calipers equipped with 2 large push plates and 2 brake caliper hooks.The larger plates are held in place by built-in strong magnets and cylindrical pins for quick installation and removal.Hooks can hang calipers, brake tubing, and other parts to facilitate inspection of other car parts while the brakes are being repaired..
  • Easy to use: Ratchet technology gives a full 360° swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”.
  • High quality:Brake caliper compressor uses high strength spreading plates with 1/6" thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip..
  • Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers..
  • Professional after-sales team: All kits are provided with lifetime technical support and one-year limi....
Check Stock

R&G Brembo HIGH Temperature Brake Caliper Decal Sticker Set of 4 Decals + Instructions + Decal Surface Preparation Solution (White)

  • Die-Cut Decals - Only the Letters are the ones that stays in your Brake Calipers, (No Clear tape on Top).
  • Specially designed for the Brembo 4 Piston Brake calipers.
  • You will receive 4 Decals, Installation Instructions and a Decal Surface Preparation Solution.
  • Made with Professional High Quality Materials. 5-7 Year Outdoor life.
  • R&G Decals Specialize in Brake Calipers Decals and are made with High Quality Vinyl Temperature Resistance that Stand the Heat of the Brake Calipers... made In USA and ships within 24hr (Average delivery between 3 and 12 days).
Check Stock

Dupli-Color EBCP40200 Black Caliper Paint

  • Aerosol Features EZ Touch Conical Nozzle.
  • Dry to touch in 30 Minutes / Handle in 1 Hour.
  • Resistant To chipping, chemicals, and brake dust.
  • For use on brake calipers, rotors, and drums.
  • Paint Kit includes: Caliper Paint Pint, Caliper Aerosol Cleaner, Stir Stick, Paint Brush, Masking Tape, and Step-by-Step Instruction Booklet..
Check Stock

NEW SOUTHWEST SPEED DISC BRAKE KIT, FRONT, 2" DROP SPINDLES,ROTORS, BLACK WILWOOD CALIPERS, COMPATIBLE WITH 55-57 CHEVY, PERFORMANCE BRAKE KIT, PART# 205-2052

  • Southwest Speed 2" Drop Spindle & 10 1/2" Disc Brake Kit with Wilwood Calipers (Part #205-2052) for Both Front Wheels. Features Powder-Coated Black Wilwood Calipers..
  • These 1-piece rotor and hat kits deliver the cost effective combination of braking power and style of American muscle cars and vintage rods. They are fully compatible with OE master cylinder output. They provide solid brake capacity and complimentary style with wheel, tire, and suspension upgrades on all types of daily drivers, race vehicles, and ultra-styled show machines..
  • Wilwood's D154 1-Piston Calipers are a lightweight, high-strength, extreme-duty alternative to the OE-style cast iron calipers. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE calipers..
  • Kit includes parts for both front wheels: 1.00" Thick x 10.50" o.d. 1-piece rotors/hats 5 x 4.75" Bolt pattern 12mm x 1.5 studs 2" Drop Spindles Strong 4140 steel construction Wilwood D154 1-piston forged aluminum calipers - Black 2.50" pisto....
Check Stock

G2 High Temperature Brake Caliper Paint System Set Yellow G2161

  • HEAT AND WEAR RESISTANT - G2 brake caliper epoxy paints are able to resist heat up to 980 degrees! Our epoxy paint system creates an extremely tough,....
  • EXTREME DURABILITY - G2 epoxy brake caliper paint system offers great chemical and physical protection against brake fluids, road salt, dust, dirt,....
  • HIGH GLOSS FINISH - This professional paint kit adds a great stylish touch to any brake caliper. This brush on system has advantages over spray- type....
  • 12 STANDARD COLORS - G2 brake epoxy paint kit comes in 12 different high gloss, heat resistant colors including red, yellow, silver, blue, purple,....
  • 100% MADE IN USA - Our Paint Kits are made and manufactured in the USA. Each complete kit covers 4 disc brake calipers or 2 drums and contains an....
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock