Best Desktop Sata Cables

ACASIS PCIe SATA Card 10 Port with 10 SATA Cables and 2 SATA Power Splitter Cables, SATA Controller Expansion Card with Standard Profile Bracket, 6Gbps PCIe to SATA 3.0 PCI-E X4 Host Controller Card

HIGH-PERFORMANCE: Add six SATA III 6Gbps ports to your desktop computer or server using a PCIe x4 slot to connect SATA drives (HDD/SSD).
6-Port SATA PCIe card features 6x SATA connections for connecting drives using SATA cables (sold separately).
ASM1166 CONTROLLER: This PCI Express SATA 3 6Gbps card features single-chip architecture adding six SATA (serial ATA) 6Gbps ports via a single x4 PCIe slot, for combined total bandwidth up to 16Gbps.
Supports Port Multiplier & NCQ (Native Command Queue).
COMPATIBILITY: Supports PCIe 3.0, SATA 3.2 & AHCI 1.4 Specs, and previous gens at lower performance.
Windows (7+), macOS (10.10+), Linux (2.6.32+).
Improved motherboard compatibility with no built-in RAID.
Supports ATA & ATAPI (HDD, SSD, Optical Disc).
EASY INSTALL: Expansion card w/ plug-and-play setup in full or low-profile PCI-e slot (full-profile bracket installed, low-profile incl).
Supports storage management systems such as Storage Spaces (Microsoft) , RAID Assistant (macOS), mdraid/mdadm (Linux).

Check Stock

4-Pin Molex to Floppy Drive 4-Pin Female Power 8 inch Cable

4-Pin Molex to Floppy Drive 4-Pin Female Power 8 inch Cable.
Authentic only if sold by Micro SATA Cables..
Categories: Cables, PC Power Cables, SATA Cables.

Check Stock

ORICO 2.5 ->3.5 Mounting Internal 2.5 SSD SATA to 3.5 Hard Drive Adapter Internal Drive Bay Converter Mounting Bracket Caddy Tray

【2.5 to 3.5 Drive Adapter】SSD adapter can easily convert 2.5 inch SATA drives to 3.5 inch in size. Compatible with any 7 / 9.5 / 12mm hard drive /....
【Convenient Use】 The SSD organizer has a SATA III interface, requiring no data cables or drivers, supports hot swapping, plug and play. Compatible....
【6Gbps SuperSpeed 】Adopting SATA3.0 protocol, the maximum transmission rate of this 2.5 to 3.5 SSD converter is 6Gbps, enabling high-speed....
【Full Airflow】 The hard drive tray is made of ABS plastic, has multiple slots on both sides, and features an open design that allows full airflow....
【WIDE APPLICATION】 Commonly used 3.5-inch drives can be used anywhere, including desktop computer drive bays and side or bottom mount drive trays..

Check Stock

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

...ller with an SFF-8087 port to 4 discrete SATA drives.
Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
Leverage hardware raid performance with this SATA multi-lane cable.
Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
Supports up to 6Gbs data transfer rate per drive.
DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
Slim ribbon cables minimize airflow impact in a computer case.
Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
Woven mesh sheath covers half of the cable for easy routing.
P1 to P4 markers provide easy ID after installation.
Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.

Check Stock

UCTRONICS Pi Rack Pro for Raspberry Pi 4B, 19\ 1U Rack Mount, Support for 4 2.5\ SSDs, Secure Shutdown, 0.96\ Color Display for Raspberry Pi

【For Raspberry Pi 4B】Designed specifically for the Raspberry Pi 4B, the Raspberry Pi rack allows you to install up to 4 RPis, making it easy to build small Raspberry Pi clusters..
【4 SATA shields】No need for SATA-to-USB cables, just plug in 4 2.5" SSDs for additional storage capabilities. The board is also reserved for a fan interface, which supports external 2.54 2pin fans to cool the Raspberry Pi. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
【Safety Shutdown】4 power buttons can be pressed to achieve a soft shutdown, and then press to power on. No longer worry about the damage caused by a hard shutdown on the Raspberry Pi..
【0.96" LCD display】graphical display of RAM/Disk/Temp usage, IP address always on, and also supports custom display content..
【19" 1U Rack Mount】19×5.72×1.75 inch(482.6×145.4×44.5mm), the pi rack can be installed into the cabinet or placed on the desktop. This solution not only beautifies your cabinet and desktop but also keeps dust out..

Check Stock

ORICO 2.5 SSD SATA to 3.5 Hard Drive Adapter Internal Drive Bay Converter Mounting Bracket Caddy Tray for 7 / 9.5 / 12.5mm 2.5 inch HDD / SSD with SATA III Interface(1125SS)

【2.5 to 3.5 Drive Adapter】- ORICO ssd adapter can easily convert 2.5-inch SATA drives to 3.5-inch size. Compatible with any 7 / 9.5 / 12.5mm 2.5-inch hard drives..
【Convenient Use】 - The ssd caddy itself has a SATA III interface, which does not require data cables and drivers, supports hot swapping, plug and play. Compatible with Windows, Mac OS and Linux..
【6Gbps SuperSpeed】 - Adopting SATA 3.0 protocol, the maximum transmission rate of this 2.5 to 3.5 ssd converter is up to 6Gbps, which enables high-speed transfer of HD movies and data. Backward compatible with SATA I/II..
【Air Flow Design】 - The hard drive tray is made of ABS plastic, has multiple slots on both sides, and features an open design that allows for air flowing to maximize protecting your hard drive..
【Wide Application 】- It can be used anywhere 3.5-inch drives are commonly used, including desktop computer drive bays and side or bottom mount drive enclosure trays..

Check Stock

Seagate 1TB Pipeline HD SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive (ST1000VM002) (Renewed)

1TB Capacity, 64MB Buffer, SATA 6.0Gb/s Interface, 3.5inch Desktop Hard Drive.
Low power consumption, Cool & Quiet Operation -Designed for 24/7 Operation, Reliable & Heavy Duty.
Works for Desktop PC, NAS, NVR, Surveillance CCTV DVR, Security Camera System.
(Bare Drive Only) Brown Box Single Pack, (No Screws, Cables or Accessories included) -Friendly Reminder- Please FORMAT HDD on system in order to be detected/shows on system..
3 Years Warranty from Reseller, Worry Free Return! 100% Full Refund.

Check Stock

SATA Cable, SATA Data Cable and SATA Power Splitter Cable (4 Pack) SATA III Cable 6.0 Gbps SATA 3.0 Cable,15 Pin Power Splitter Cable

Sata Cable is made with copper wires, good contact performance for data transmission and environment friendly. SATA data cables and SATA power cables are compatible with all SATA connectors (HDD, SSD, CD DVD Blu-ray drives)..
Sata data Cable 6 Gbps Fast Data Transfer: The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, STRAIGHT & RIGHT ANGLE- Package includes both straight and right angle cable to meet your different demand. 90-degree design can make for better cable management in some situations, especially in tight spaces..
Secure Connection: Locking latch on each end of the cable to ensure secure connections for fast and reliable file transfer..
Accessories 2xSata cable:1x1x 4-pin ATX to 2x 15-pin Sata Straight Power Splitter Cable 1x 15-pin SATA to 2x 15-pin Sata Straight Extend Splitter Cable.
Black 1 x Straight SATA 3.0 Cable 1 x Angle SATA 3.0 Cable.

Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..

Check Stock