Best Desktop Microphone Stand

Boseen Microphone Boom Arm Stand for Blue Yeti with Shock Mount Foam Cover, Heavy Duty Boom Scissor Arm Stand for Blue Yeti, Broadcasting and Recording

Non-rebound and Safer Design - Compared with the general outside spring microphone boom arm, the spring of this product is built-in, which can effectively reduces the noise and prevent you from being injured by the external spring or rebound arm when adjusting or installing the microphone stand arm..
Heavy Duty Construction Mic Stand - This mic boom arm for blue yeti is made of sturdy metal which can hold your blue yeti microphone firmly, effectively reducing noise and vibration. The microphone boom arm rotates 360 degrees and offers a horizontal reach of 27 inches..
Excellent Microphone Shock Mount - The shock mount is made of lightweight, high-quality aluminum, compatible with Blue Yeti and Blue Yeti Pro USB microphone, which can isolate your mic from noises and vibration. There is a cotton pad between the shock mount and the bottom of your microphone, which can prevent your microphone from being scratched..
Professional Microphone Foam Cover - This microphone pop filter is specially designed for Blue Yeti. It can effectively reduce the recording noise, defend against pops, b/p plosives, windbreaks, hissing, “breath in”, protect mic from spit and reduce rerecords..
Upgraded Table Clamp - There is a sponge pad on the clamp, which can effectively pre....

Check Stock

InnoGear Desktop Microphone Stand, Upgraded Adjustable Table Mic Stand with Mic Clip and 5/8\ Male to 3/8\ Female Screw for Blue Yeti Snowball Spark & Other Microphone, Pack of 2

Upgraded with metallic base which affixed to 4 non-slip cottons, moving the desktop microphone stand without generating any noise and leaving any scratches on the table..
Our base diameter is bigger and weight which has been increased as heavy as 840g/1.85lb so it won't be knocked over very easily.
The height of the desktop microphone stand can be adjusted from 10.6" to 15.4"..
Other snap-in style stands can loosen over time. However, this product comes with a screw-in style stand which is quite tight and safe, ensuring that its height remains the same without sliding..
This product comes with a high-quality metal with 3/8" female to 5/8" male screws for multipurpose use. It is compatible with Snowball, Blue Yeti Pro, Blue Yeti, and many other microphones..
This desktop microphone stand is portable and users can easily hold it at church, conference room and other public places..

Check Stock

Blue Yeti Microphone Arm - Premium Boom Arm for Blue Yeti, Heavy Duty Blue Yeti Mic Arm and Cable Management, Great for Gaming and Streaming, 360° Rotatable Blue Yeti Mic Stand by YOUSHARES

Professional Microphone Arm - Universal professional microphone scissors arm stand with 3/8" to 5/8 " adapter. The personalized microphone arm can be used to replace most different models of blue yeti boom arm. No sagging, just rock solid. This is a sturdy, elegant is a very high quality boom arm..
Stability - This microphone boom arm can support microphone weights of up to 1.4kg/3 lbs. Heavy duty boom mic stand with strong springs for stability and durability. The desktop clamp made of metal, it fits fully to the table. In addition, the mic boom arm are perfectly nested in the clamp for even forces, increasing the stand's stability and durability..
Flexibility - Mic boom stand can be rotated 360 degrees around the table clamp, or the arms can be locked and fixed in any position and angle you want. Desktop boom microphone stand has three adjustable circular knobs that control the first arm - 120°, the second arm - 180° and the microphone - 200° rotation angle, which can be adjusted at will. Very flexible and easy to use, suitable for installation in a variety of scenarios..
Concealability - The mic arm both arms are designed with recessed channels to conceal the microphone cable within the recessed channels and each arm has three clasps to hold the c....

Check Stock

InnoGear Desktop Microphone Stand, Adjustable Mic Stand with Boom Arm, 0.8 lb Counter Weight, Mic Clip and 3/8\ to 5/8\ Screw Adapter for Kick Drums, Guitar Amps, Blue Yeti and Blue Snowball

Boom Arm with Counter Weight: This desktop microphone stand comes with one good quality boom arm and one 0.8 lb counter weight. You could easily adjust the position of the boom arm and counter weight according to your needs. When the boom arm is extended halfway, the max load is 5 lbs and when the boom is fully extended, the max load is 3 lbs..
Well Made Weighted Steel Base: The high-quality steel base is designed as a trapezoid, more sturdy and more stable. It has two non-slip pads at the bottom to achieve a better usage experience. What’s more, you could place items on the smooth and delicate surface, saving space on the table..
Adjustable Height and Flexible Angle: The height of this InnoGear upgraded heavy-duty microphone stand could be adjustable from 11'' to 16'' inches while the boom arm is easy to move up and down and 360° rotate, allowing you to find the perfect position for your microphone..
Another Desktop Stand without Boom Arm: Screw the T-shape tube off the adjustable height shaft and you could connect the mic clip (included) or shock mount (not included) to the stand and attach your microphone. This is another usage of the desktop stand without boom arm if you have the need for it..
Strong Compatibility: This upgraded tabletop mic stand....

Check Stock

SUNMON Quadcast Mic Stand with Boom Arm Clamps For HyperX Quadcast Microphone

【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Assembly clip】 - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
【Wide range of application】 - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
【Refused to break】 - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..

Check Stock

Moukey Desk Mic Stand Universal, Adjustable Desktop Mic Stand Portable Foldable, Tripod Mic Table Stand with Small Plastic, Microphone Stand for Sm57 Sm58 Sm86 Sm87 Blue YetiBlue Snowball iCE

Unique Microphone Clip: The Microphone clip of this desk mic stand with anti-slip and fixed function for all handheld transmitters, such as Sm57 Sm58 Sm86 Sm87, suitable for dynamic microphones, wired microphones, and some wireless microphones. The microphone clip can be adjusted 180 degrees, and the angle can be set as needed..
Sturdy and Stable Tripod: The aluminum tripod legs for the desktop mic stand add durability and are more sturdy. Don't worry about slipping when you have a sponge pad on your feet, you can focus on recording..
5/8" to 3/8" Microphone Thread Adapter: Internal thread of the microphone clip and standard 3/8" female to 5/8" male adapter. With internal threads, this mic stand is compatible with Blue Yeti, Snowball, and other microphones. (The adapter is attached to the microphone clip and should be unscrewed when conversion is required).
Adjustable Height: This desk mic stand can be easily adjusted to height, adjustable height of 18-26.5 cm / 7.09-10.43 inches. It can be adjusted according to your angle. (Note : Max load: Approx 2.2 lbs).
Easy to Carry: The Moukey mic stand is easy to fold when not in use. Easy to store, perfect for showing or traveling on the go. Suitable for placing microphones on the desktop for meetings, lectures,....

Check Stock

InnoGear Adjustable Desk Microphone Stand, Weighted Base with Soft Grip Twist Clutch, Boom Arm, 3/8\ and 5/8\ Threaded Mounts for Blue Yeti and Blue Snowball, Kick Drums, Guitar Amps

Sturdy & Durable Base: This desktop microphone stand is designed with a heavy weighted powder coated black finish base that features a rubber gasket on the bottom to absorb vibration and provide a precise balance and stability for kick drum and amp mic stand..
Extendable Boom Arm: The telescoping boom arm allows you to adjust the length and angle to the perfect angle independently. When the boom arm is extended halfway, the max load is 4.4 lbs/2.0 kg. You can easily handle the weight of some microphone like Blue Snowball or Blue Yeti. Note: 3/8" female to 5/8" male screw adapter is included..
Height Adjustable: The height of this InnoGear heavy-duty microphone stand is adjustable from 11'' to 15.8'' inches with a reliable clutch, allowing you to place it at the optimal height for maximum comfort while using..
Flexible & Versatile: Flexible desktop microphone stand is a versatile configuration for broadcasts, podcasts, live performances which can be used for floor applications such as guitar amplifier cabinets, bass guitar amplifier cabinets, snare or tom bottom, keyboard amplifiers, theater, boundary, and so on..
Compatibility: The microphone stand fits for most types of microphones like Fifine K669B, NW-700, Audio-Technica AT2020, Audio-Technica AT2035,....

Check Stock

2) Rockville Microphones+Gooseneck Stands+Pop Filters 4 Recording,Studio,Podcast

Package Includes: (2)RockvilIe RDMS6 Studio Desktop Mic Stand w 11.8" Gooseneck+Round Weighted Base. (2) RockvilIe Universal Wireless Microphone Clip Flexible Plastic + Copper Threading. (2) RockvilIe RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables. (2) Samson PS04 4.75" Microphone Pop Filter w/ 8" Flexible Mic Boom+Clamp. : RockvilIe RDMS6 Studio Desktop Mic Stand with 11.8" Gooseneck and Round Weighted Base.
11.8 Gooseneck is Stiff and Sturdy Yet Bendable in Any Direction For Extreme Stability and Durability. 6.5 Heavy-Duty Round Weighted Base Makes This Stand Super Sturdy. Professional Stand is Perfect for Studio, Podcasting, and Many Other Applications. Includes Standard Mic Clip for Regular Mics. 5/8 Threading Fits Any Standard Mic. Includes a Metal 3/8" to 5/8" Adapter to Support Any Mic Clip or Shock Mount on the Market.
For Condenser Mics This is Compatible With Any Shock Mount (RockvilIe Rockshock is Recommended). Compatible With RockvilIe IPS22 Phone/Tablet Holder (Sold Separately in Our Store). Owners Manual. Features of RVCLIP5: RockvilIe Universal Wireless Microphone Clip W/ Flexible Soft Plastic Construction and Copper Threading. This is a high quality clip for standard sized wireless microphones. Flexible and durable....

Check Stock

Metal Desk Clamp For Microphone Suspension Boom Scissor Arm Stand Holder with Adjustable Screw by SUNMON

【Professional】- Aluminum alloy adjustable table mounting clamp is specially designed for a microphone stand, which can be firmly installed on the desk or other flat surface you want to fix..
【Applicable desktop thickness】- With an adjustable positioning screw, can easily clip to any desktop up to 2.2"/5.5cm thickness..
【Protective】- Soft foam padding protection at the contact point with the table considerately protects your desktop surface from any scratches. The foam padding is firmly bonded to the desk clamp..
【Robustness】 - The desk clamp is made of special alloy material, strong and durable..
【Note】- Desk mounting clamps only. Microphone Suspension Boom Scissor Arm Stand NOT INCLUDED!.

Check Stock