Best Degrees C

Shop-Tek/C-H Electrical Receptacle Wall Plug AC Outlet Ground Tester CZCARTA

  • Outlet tester's light sequence on receptacle tester indicates correct/incorrect wiring.
  • Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160.
  • Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C).
  • Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet.
Check Stock

Klein Tools RT110 Receptacle Tester for North American AC Electrical Outlet Receptacles

  • Outlet tester's light sequence on receptacle tester indicates correct/incorrect wiring.
  • Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160.
  • Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C).
  • Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet.
  • Designed to detect the most common wiring problems in standard receptacles.
Check Stock

3-1/2\ x 6 ft. Elastomeric Pipe Insulation, 1/2\ Wall

  • 003cb003ePrice For:003c/b003e Each 003cb003eTemp. Range003c/b003e: 0 Degrees to 850 Degrees F 003cb003eMaterial003c/b003e: Fiberglass 003cb003eLength003c/b003e: 3 ft. 003cb003eColor003c/b003e: white 003cb003eStandards003c/b003e: ASTM C547 Type 1, ASTM C585, ASTM C1136, NRC 1.36, ASTM C795, Mil-I-24244C, MEA Compliant 003cb003eFor Iron Pipe Size003c/b003e: 1/2" 003cb003eInsulation Type003c/b003e: Hinged with Self Sealing Lap 003cb003eApprox. K Value003c/b003e: 0.23 003cb003eItem003c/b003e: Pipe Insulation 003cb003eWall Thickness003c/b003e: 1/2" 003cb003eApprox. R Value003c/b003e: 2.2.
  • 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

Cooper-Atkins DPP800W MAX Digital Thermometer with Long Probe, Long Probe Thermometer (Waterproof Thermometer, Auto Shutoff, Temperature Memory),Yellow

  • Dual-range digital thermometer for monitoring temperature in food products and food service applications, including dishwashers.
  • Measures temperature from -40 to +450 degrees F (-40 to +232 degrees C), with an accuracy of + or - 1 degree F (+ or - 0.5 degrees C) from 32 to 212 degrees F (0 to 100 degrees C).
  • Stainless-steel stem-style probe is 4" long and has a reduced penetration tip for taking measurements while immersed in liquid or air.
  • Minimum/Maximum temperature memory stores high and low readings.
  • Certified to IPX7 for protection against immersion in water up to 1m.
Check Stock

3M Clear Repair Tape, 03439, 1-1/2 in x 115 in

  • Apply at temperatures above 50 degrees F (10 degrees C).
  • Do not use on car mufflers, furnace exhaust tubes, or anywhere temperatures exceed 300 degrees F (149 degrees C).
Check Stock

5016CHN, Coupling Chain, Factory New

  • 003cb003ePrice For:003c/b003e Each 003cb003eApplication003c/b003e: Motors, Pumps, Compressors, Blowers, Mixers and Conveyors 003cb003eHP Rating @ 1200 RPM003c/b003e: 11.14 003cb003eHP Rating @ 100 RPM003c/b003e: 0.93 003cb003eBody Style003c/b003e: 6E 003cb003eWidth003c/b003e: 1.88" 003cb003eOutside Dia.003c/b003e: 3.75" 003cb003eInsert Design003c/b003e: Two-Piece with Retaining Ring 003cb003eOperating Temp.003c/b003e: -30 Degrees to 275 Degrees F 003cb003eRated Torque003c/b003e: 585 in.-lb. 003cb003eItem003c/b003e: Sleeve Coupling Insert 003cb003eInsert Material003c/b003e: EPDM Rubber 003cb003eMax. RPM003c/b003e: 6000.
  • 003cb003eHP Rating @ 3600 RPM003c/b003e: 33.42 003cb003eHP Rating @ 1800 RPM003c/b003e: 16.71 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

Fluke 59 Mini Laser Infrared Thermometer Gun

  • Infrared thermometer for non-contact surface temperature measurement for use in monitoring electrical, mechanical, HVAC, and automotive systems.
  • Measures temperature from 30 to 650 degrees C (22 to 1202 degrees F) with an accuracy of or 1 degree C or or 1.0 percent of the reading from 0 to 650 degrees C.
  • Dual lasers rotate to pinpoint the edges of the measurement area.
  • Displays the minimum, the maximum, the difference between the 2 temperatures, and the average temperatures.
  • Certified IP54 for protection against dust and splashing liquid.
Check Stock

Corning 6795-420D PC-420D Stirring Hot Plate with Digital Display and 5\ x 7\ Pyroceram Top, 5 to 550 Degree C, 120V/60Hz

  • Hotplate has a U.S. three-prong plug, works with a 120V/60Hz power source, and comes with a built-in rod support.
  • 10 x 10-inch (W x D) glass-ceramic plate surface provides scratch, corrosion, and chemical resistance,  and has a casting design that deflects spills from the electrical area.
  • Digital LED temperature display (in degrees C) and an illuminated flashing power indicator that blinks until set temperature is reached.
  • Microprocessor-based control unit maintains consistent and repeatable temperature settings of 5 to 550 degrees C (+ or - 2 degrees C), adjustable in increments of 5 degrees C.
  • Angled front panel and large knob minimize damage from spills.
Check Stock

Klein Tools IR5 Dual Laser 12:1 Infrared Thermometer & ET10 Magnetic Digital Pocket Thermometer

  • Product 1: Optical Resolution (Distance-to-spot) is 12:1.
  • Product 1: Features include dual-laser targeting.
  • Product 1: Drop protection to 6.6-feet (2 m).
  • Product 1: Measurement Range: -22-degrees to 752-degrees F (-30-degrees to 400-degrees C).
  • Product 2: Magnet inside base of probe to easily attach to vents.
  • Product 2: Range -40 to 572-degrees F (-40 to 300-degrees C).
  • Product 2: User selectable Fahrenheit and Celsius temperature measurements.
  • Product 2: Backlit display for easy viewing in low light.
Check Stock