Best Deep Socket Set 3 8

ABN Spark Plug Socket Set – 6 Piece 3/8in Drive Magnetic Socket Extension Set Spark Plug Removal Tool Set

  • LONG REACHING SPARKPLUG SOCKETS: The ABN 3/8-inch drive Magnetic Socket Extension Spark Plug Extractor Set will help you install and remove deep-set spark plugs easily and quickly.
  • Set includes (1) 3/8 to 13/16-inch spark plug extension socket, (3) 3/8 to 5/8-inch swivel extension sockets, and (2) 9/16-inch socket adapters that fit your 3/8-inch square drive spark plug wrench or the included 5/8-inch extension sockets.
  • COMPATIBLE WITH YOUR VEHICLE: Fits your 3/8-inch drive spark plug wrench and ratchet tools (not included) and provides a secure grip on any 5/8-inch, 9/19-inch, or 13/16-inch diameter spark plug (not included).
  • 5/8 inch spark plug sockets offer 4.25, 6, and 11-inch (10.8, 15.2, and 27.9 cm) extension to reach deep set spark plugs while the 9/16-inch socket adapters offer an extra 2.5 inches (6.4 cm) of extension.
  • The 13/16-inch socket has a 6-inch extension.
  • SECURE GRIP ON YOUR SPARK PLUGS: Most pieces in this magnetic spark plug socket set feature a 360-degree swivel from the lengthy extension bar to provide maximum flexibility when working.
  • Knurled grip allows for a comfortable and secure hold, while magnetic socket core holds and protects spark plugs for easy removal and installation to minimize the possibility of dropping and da....
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
Check Stock

Kobalt 9-Piece Metric 3/8-in Drive Deep 6-Point Impact Socket Set

  • ▶ Material: Made of Cr-V steel (50BV30), the surface is heat treated with black phosphate finish to resist corrosion, rust and wear. One-piece forging craft help the socket set with higher toughness and more durable.
  • ▶ 55-piece Set: 48 pcs sockets - SAE size with deep and shallow length: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16".
  • Metric size with deep and shallow length: 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 27mm. 7 pcs accessories - 3 pcs extension bars: 3", 6", 10".
  • ▶ 6-point Design: The 6-point socket design enlarges contact surface, make the socket fits into the fastener and locks force more firmly, reduces wear and prevents rounding off at corners.
  • ▶ Features: 1) Laser etched markings on the sockets make it easy to spot the right one you need. 2) The spring-loaded detent ball securely fastens socket in place, and the through hole will lock onto drive tang, which will prevent them from being dropped. 3) The swivel adapter allows for a full 360° rotation for easier access to hard-to-reach areas.
  • ▶ Storage: The set comes with a customized heavy duty case for portability. Designated slots in....
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

NEIKO 02437A 1/4\ Drive Impact Socket Set | 54 Piece MM & SAE | 3/16” – 9/16” & 4 – 15 | Deep & Shallow | CrV Steel | 1/4 Ratchet, Reducer, Extensions, Universal Joint, & Hex Shank Adapter

  • DURABLE: Quarter inch drive socket set is constructed of heavy duty Chrome Vanadium (CrV) steel and black phosphate coating for high torque impact applications. Standard and deep sockets have a high contrast laser-etched marking..
  • RATCHET: Low profile 72 tooth quick release ratchet handle engages faster and supports tighter turns when combined with six point hex socket tool set for applying optimal turning power on those stubborn bolts and fasteners..
  • EXTENSIONS & SWIVEL JOINT: 1/4" impact extension bars in 3” and 8” long for those hard to reach areas. 1/4" angle socket adapter with ball type u-joint design with a 360-degree bendable joint creates a rotatable socket..
  • IMPACT REDUCER & ADAPTER: Includes a 3/8” drive to 1/4" drive reducer that is impact grade for use with a 3/8 ratchet or 3/8 impact wrench. 1/4 hex to 1/4 inch drive socket adapter to use with power tools, quick connect chuck or quick disconnect drill..
  • SOCKET SIZES: 10 pieces of each standard and deep impact sockets in 3/16”, 7/32”, 1/4.
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

ARES 60058 - 6-Pack Set Metric and SAE Magnetic Socket Organizers -Blue and Red -1/4 in, 3/8 in, 1/2 in Socket Holders -143 Pieces of Standard (Shallow) and Deep Sockets -Organize Your Tool Box

  • METRIC SOCKET ORGANIZERS: This set includes three blue metric magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep metric sockets. These organizers can be used with the following socket sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm..
  • SAE SOCKET ORGANIZERS: This set also includes three red SAE magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep SAE sockets. These organizers can be used with the following socket sizes: 1/8-in, 5/32-in, 3/16-in, 7/32-in, 1/4-in, 9/32-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 9/16-in, 5/8-in, 11/16-in, 3/4-in, 13/16-in, 7/8-in, 15/16-in, 1-in, 1 1/16-in, 1 1/8-in, 1 3/16-in, 1 1/4-in. *Sockets not included with the holders.*.
  • DESIGN CONSIDERATIONS: Each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces. These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can ....
Check Stock

ARES 60057-6-Pack Set Metric and SAE Magnetic Socket Organizers -Black and Red -1/4 in, 3/8 in, 1/2 in Socket Holders -143 Pieces of Standard (Shallow) and Deep Sockets -Organize Your Tool Box

  • METRIC SOCKET ORGANIZERS: This set includes three black metric magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep metric sockets. These organizers can be used with the following socket sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm..
  • SAE SOCKET ORGANIZERS: This set also includes three red SAE magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep SAE sockets. These organizers can be used with the following socket sizes: 1/8-in, 5/32-in, 3/16-in, 7/32-in, 1/4-in, 9/32-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 9/16-in, 5/8-in, 11/16-in, 3/4-in, 13/16-in, 7/8-in, 15/16-in, 1-in, 1 1/16-in, 1 1/8-in, 1 3/16-in, 1 1/4-in. *Sockets not included with the holders.*.
  • DESIGN CONSIDERATIONS: Each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces. These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can....
Check Stock

NEIKO 02440A 3/8-Inch-Drive Impact Socket Set SAE Sizes 5/16 to 3/4 and Metric Sizes 8 mm to 19 mm Includes Extension Bars and U-Joint 44 Pieces

  • METRIC & STANDARD SOCKET SET: Our universal socket set includes both metric and standard sizes to fit any and all measurements you encounter on the job! This socket kit will fill all your tool needs..
  • HEAVY-DUTY IMPACT SOCKETS: Each socket in this 44-piece master kit is constructed with high-impact drop-forged premium CrV steel. The sturdy and professional chrome vanadium construction allows you to take on any project, large or small..
  • 6-POINT HEX DESIGN: The 6-point hex socket design prevents round off on fasteners under high torque exertion from high-impact or electric wrench output. The included socket set case holds each socket for easy transport and storage..
  • EASY-READ SOCKET SET: Each socket has a highly visible laser-etched marking on a black phosphate finish for easy identification of the socket measurement. This design allows for fast application, efficiency, and accuracy in any work space..
  • METRIC & STANDARD SOCKET SIZES: This set includes SAE deep sizes from 5/16" to 3/4" and SAE standard sizes from 5/16" to 3/4". It also includes deep metric sizes from 8 mm to 19 mm and standard metric sizes from 8 mm to 19 mm..
Check Stock