Best Cyclone Dust Collector For Shop Vac

Oneida Air Systems Super Dust Deputy (4/5 DIY)

  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need for cleanings..
  • HIGH EFFICIENCY - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency..
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. 4/5 Cyclone with included adapters offers 4 or 5" OD inlet (connects to your tools) and 4 or 6" OD outlet (connects to your collector). Approximately 23" height..
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Ready out of the box to connect to your dust collector with either a 4” or 6” hose, and to your tools with either a 4” or 5” hose. Includes cyclone, 2x reducer adapters, assembly gasket and hardware..
Check Stock

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

Cyclone Dust Collector 2.0” DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc

  • DIAMETER 2.0”: 2″ OD inlet (connects to your tools) and 2″ OD outlet (connects to your collector). If the size of the hose is too small, you can heat the hose and then put it on the diameter of the dust collector. The diameter of the air inlet and outlet of our dust collector is 2.0”, if you are 1.25”, 1.5”, 2.5” or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving..
  • FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios)..
  • SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a strong....
Check Stock

Mullet High-Speed Cyclone Dust Collector

  • THE FASTER THE SPIN, THE MORE DUST THAT FALLS IN! -- Parabolic design and seamless one-piece construction create a faster airstream, more suction power and better capture efficiency than ordinary straight-wall cyclone-and-bucket assemblies..
  • RIGID, CUT-TO-FIT PVC CONNECTION -- Eliminates the Frankenstein-like assembly of bolts, bungees, and duct tape of other systems creating a unified, airtight connection and a vac filter that stays cleaner, longer..
  • UNIVERSAL VAC COMPATIBILITY -- Included Hose Adapters allow for easy connection to virtually all wet dry shop vacuums, dust extractors and their hoses. Red, orange, yellow or green.
  • MADE IN USA -- Headquartered in Dripping Springs, Texas..
Check Stock

Shop Fox W1867 1.5 Hp Portable Cyclone Dust Collector

  • THE FASTER THE SPIN, THE MORE DUST THAT FALLS IN! — Parabolic design and seamless one-piece construction create a faster airstream, more suction power and better capture efficiency than ordinary straight-wall cyclone-and-bucket assemblies..
  • RIGID, CUT-TO-FIT PVC CONNECTION — Eliminates the Frankenstein-like assembly of bolts, bungees, and duct tape of other systems creating a unified, airtight connection and a vac filter that stays cleaner, longer..
  • UNIVERSAL VAC COMPATIBILITY — Included Hose Adapters allow for easy connection to virtually all wet dry shop vacuums, dust extractors and their hoses. Red, orange, yellow or green.
  • MADE IN USA — Headquartered in Dripping Springs, Texas..
Check Stock

DCT Cyclone Wood Saw Dust Collection Garbage Trash Can Lid – Woodshop Dust Separator Lid for Woodworking Collector Tools

  • ENHANCED DUST COLLECTOR EFFICIENCY: Use the DCT Cyclone Wood Saw Dust Collection Garbage Can Lid – Woodshop Dust Separator Lid for Woodworking....
  • USE YOUR TOOLS: Fits most 30-gallon metal trash cans for best seal.
  • Can outside diameter must be between 19 inches (48.3cm) and 20.75 inches (52.7cm).
  • VARIOUS APPLICATIONS: Create a vacuum system and use to build a dust separator for your woodworking power tools by placing in front of your dust....
  • BUILT TO LAST: Constructed from rugged ABS plastic for reliable strength and longevity.
  • Features a foam gasket for a superior seal.
  • EASY TO USE: Place the included curved elbow fitting on the input intake side (to the Jointer) of the cyclone can and your dust collector on the....
Check Stock

4 Pieces Dust Collector Bags Compatible with Harbor Freight Central Machinery 70 Gallon, Replacement Plastic Clear Dust Collectors for Woodworking, Compatible with Meeting Spec for 97869, 61790 Model

  • Package includes: you will receive 4 pieces of clear dust collector compatible with shop vac filters, enough to meet your needs of replacing the bags for dust collection systems.
  • Widely compatible: our plastic collector bags are compatible with Harbor Freight central machinery 70 gallon, which can also be applied for storing food, classifying beads, packing heavy objects, etc., convenient for your daily use and working.
  • Reliable material: the dust collector bags are made of thick plastic material, waterproof and dirt proof, stretch-proof, not easy to break or leak, which can contain strong bearing capacity.
  • Proper size: the clear dust collector measures about 80 x 120 cm/ 31.5 x 47 inch, which is long and large enough to store more dust and objects for one time, and not easy to fall off or tear.
  • Transparent for visuality: the plastic dust collectors are clear for you to confirm the collecting process at any time, which can offer convenience while you are doing woodworking and improve your working efficiency.
Check Stock

Heroines

  • ...nction: The 2.0 HP, 9.8 Amp low noise motor creates a powerful 1059 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: The cyclone system of this woodworking dust collector allows larger wood chips to fall and be caught in the collection drum, while finer wood particles are circulated into the filter. This achieves a better purification effect..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 3-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
Check Stock

Sapilo Replacement Vac Bags 9066100, 90671, 90661 Strong Suction Dust Collector Bags, Type E Vac Filter Bags, Pack of 5 Insulation Vacuum Bags (5-8 Gallon)

  • | Sucking Your Worries In | ✨ Trap all the dust in the vac filter bags and see a big difference in your garage shop.
  • these dust collector vac bags improve air suction and keep the filter clean no matter if you're sucking up nails or broken glass.
Check Stock