Best Cutting Production Line

Logan 660-1 Framer’s Edge Elite 60 Inch Mat Cutter for Framing, Matting and Hobby Use

  • A heavy-duty easy to use mat cutter designed for production use by professionals and artists, so easy to use and can be used by amateurs as well.
  • 2 quick-change squaring arms acts like a t-square to ensure accuracy, alignment and straight cutting in a high volume mat cutting environment.
  • Micro-adjustment over cut screw has been added to the rear of the cutting head to allow for adjusting so you don't need to unscrew to release blades for small overcut adjustment.
  • 60-inch capacity cutter for 4 and 8 ply boards with dual straight or bevel head cutting ability-need to use proper blades for 4 or 8 ply cutting-4 ply uses blade #269 and 8 ply uses blade #268-Free 8-ply Cutting Blades Included..
  • Also features a start and stop indicator and adjustable production stops making production matting and framing fast and easy..
Check Stock

Minatee Rotary Cutting Discs Tool Accessories Wheels Set 10 Diamond Cutting Wheels 6 HSS Circular Saw Blades 10 Resin Cut Off Discs 36 Resin Cut Off Discs in Red 8 Mandrels for Wood Metal DIY Craft

  • 【30PCS RESIN CUTTING DISCS】: With low heat generation and thin cutting line, the cut off wheels are applicable to electric grinders, electric drills, hanging grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal, bolts or screws, circuit board and DIY production after connected with mandrels, and are ideal for olive cutting..
  • 【GREAT DIY TOOLS 】: Cutting discs with 1/8" shank fit most power die grinders or rotary tools & air tools. It is easy to install and replace. Highly recommended for DIY, crafts, hobbies, professional, home repair, model making and more..
  • 【100% SATISFACTION】 If you have any problems, please contact usand we promise an 100% satisfactory solution. You don't need to worry about returns and refunds. Hope you always have the best experience! Many thanks for your support!.
Check Stock

DEWALT Wet Tile Saw, Masonry, 4-3/8-Inch (DWC860W)

  • Power 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materials.
  • Premium 4-3/8-inch diamond blade allows the user to cut ceramics and stone materials up to 3-centimeters deep-wet or dry.
  • 13-Foot water line feeds water to the blade decreasing dust and increasing blade performance and life.
  • Bevels to 45 Degrees for quick angled cuts.
  • Lock-on button reduces fatigue during production cuts.
Check Stock

DEWALT Wet Tile Saw, Masonry, 4-3/8-Inch (DWC860W) (Renewed)

  • Power 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materials.
  • Premium 4-3/8-inch diamond blade allows the user to cut ceramics and stone materials up to 3-centimeters deep-wet or dry.
  • 13-Foot water line feeds water to the blade decreasing dust and increasing blade performance and life.
  • Bevels to 45 Degrees for quick angled cuts.
  • Lock-on button reduces fatigue during production cuts.
Check Stock

Cutting Wheel Set for Rotary Tool, 88Pcs HSS Circular Saw Blades Diamond Wood Glass Plastic Metal Stone Cutting Drill Wheels Kit with Mandrels for Dremel

  • ...iamond Cutting Discs,10 Double Mesh Cut-off Wheels,36 Resin Cutting Discs,20 Polished Discs,5 Mandrels and even 1 soft cleaning cloth,this rotary cutting wheels set covers all the bases with quality products at a price any operator can afford. Ideal for cutting, grooving trimming wood,plastic,ceramics,metal and DIY production..
  • EFFICIENT AND SMOOTH CUT - These rotary cutting wheels are made of high quality steels,diamond particles,fiberglass reinforced for strength and durability. The cut off saw blades are high speed steel and there are 6 kinds of outer diameters 22/25/32/35/44/50mm.
  • With low heat generation and thin cutting line,the double mesh cutting wheels are applicable to electric drills,hanging grinders,electric grinders,etc. The diamond cutter wheels are suitable for cutting gem,jade and glass..
  • HIGH COMPATIBILITY - These cutting wheels are suitable for Dremel rotary tools as good as original. We use original rotary tools to test this accessory kit. And the mandrels fit for most power die grinders or rotary tools & air tools.The whole cutter wheels set is suitable for cutting wood,plastic,gemstone,glass,ceramic,stone,aluminum and copper. The mini rotary ....
Check Stock

GYROS 1.5” Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory | Made in USA 11-32156/12

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are designed to cut High-Tensile Strength materials cleanly. These Fiber Disk cutting discs are perfect for professional, commercial, and DIY production due to their minimal heat generation and thin cutting line. They are made in the United States and have a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
  • High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
Check Stock

GYROS 2” Mini Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory. Made in USA 11-32208/12

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are designed to cut High-Tensile Strength materials cleanly. These Fiber Disk cutting discs are perfect for professional, commercial, and DIY production due to their minimal heat generation and thin cutting line. They are made in the United States and have a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
  • High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702

  • Efficient and Smooth Cuts - The Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are precisely developed to cut materials with low tensile strength. These Fiber Disk cutting discs are perfect for both professional and DIY production due to their low heat generation and thin cutting line. They are made in the United States and have a maximum speed of ​​42,000 RPM..
  • Double Reinforced, High Quality - Cutting discs are made of fiberglass abrasive with a double reinforced structure, they have a great working efficiency, unrivaled strength, and flexibility, are long-lasting and break-resistant. Professionals and hobbyists looking for the best rotary tool accessories for Dremel and other top-brand rotary tools will appreciate the Gyros Fiber Disk LT Multi-Set..
  • Low Tensile Strenght – Gyros LT mini cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are specially designed and formulated to cleanly cut Super-Tensile Strength materials. These Fiber Disk cutting discs are perfect for commercial, professional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensi....
Check Stock