Best Custom Design Solenoid

4L60E Transmission Master Solenoid Kit Compatible with 1993-2006 GM EPC Shift TCC 3-2 PWM

  • Note: This part is a refurbished part,If you have to replace the solenoids or valve body, or reprogram the system, always perform the adaptive relearn. If you don’t, you could run into harsh or erratic shifting..
  • Fitment:Compatible with Fits all GM Products with the 4L60E Model Automatic Transmission 2003-On.
  • Package List:This kit includes everything pictured: One (1) A Shift Solenoid One (1) B Shift Solenoid One (1) 3-2 Downshift Solenoid One (1) EPC (Pressure Control) Solenoid One (1) TCC/PWM Solenoid.
Check Stock

TOPEND Dump Trailer Solenoid- Intermittent Duty Solenoid Relay- for Part Numbers SAZ4201GJ 7522 SAZ-4201ER 070009 190107 KTI Unit KTI 391-2-C (12 V 4 Terminal 100 Amp)

  • 【High Quality】Intermittent Duty Solenoid is made of tough plastic and durable copper, Coil Roll is using 180℃ copper wire, which allows it to be used in the harshest environmental conditions, protects against dust and water jets, dust& liquid resistant, anti-rust and corrosion. 100% OEM Match and Replacement..
  • 【OEM Parts Number】Solenoid Switch Replaces Part Number: Prestolite SAZ-4201GJ 7522 SAZ-4201ER Monarch/Bucher 07522 IRON BULL Dump Trailer Solenoid Also suitable for pj dump trailer with KTI system OEM Part# 190107.
  • 【Parameter】OEM Replacement Switch Solenoid Fits Prestolite, Monarch/Bucher, Continuous Amps 100, 12v, 4 Terminals, Intermittent, Surge Amps 200..
  • 【Application】This 4 terminal solenoid is commonly used by hydraulic dump trailer manufacturers (eg Load Trail, Parker Performance). It works on power up / power down dump trailers.It can also replace the solenoid valve of the hydraulic leveling jack on the motorhome. Also common on many other brand dump trailers..
  • 【replacement】 Dump trailer solenoid Genuine....
Check Stock

Von Duprin 050240 6000 Series Solenoid Kit, 24 VDC (FS and FSE)

  • 【Dimension】- 20 x 26 x 39mm/0.78" x 1.02" x 1.53"(L*W*H).
  • 【Good design】- Pull Type, linear motion, frame type, plunger spring return, Low friction to ensure high efficiency and prolong life, 12V DC solenoid electromagnet..
  • 【Advantages】- Solenoid electromagnet has simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity..
  • 【Application】- DC 12V solenoid electromagnet widely used in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc..
  • 【Noted】-As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time, best operate time is in 30 seconds..
Check Stock

FZONE Aquarium CO2 Regulator for Paintball with DC Solenoid and Aluminum Alloy Bubble Counter and Check Valve

  • DESIGN FOR PAINTBALL TANK. Connect to paintball CO2 tank, no adapter required, no assembly required..
  • 12V DC SOLENOID WITH PRECISION NEEDLE VALVE! This co2 regulator use 12V DC solenoid valve repalced AC solenoid valve, safer and more stable, lower....
  • BUBBLE COUNTER WITH CHECK VALVE FUNCTION! Come with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter....
  • CLASS 1 MANUFACTURING TECHNOLOGY! The co2 regulator is made of hard aluminum alloy, surface spraying treated..
  • ATTENTION: Only suite for paintball tank(Paintball tank is NOT included, for demonstration purposes only.Please fill up your paintball CO2 tank if you....
Check Stock

FZONE Aquarium CO2 Regulator for Paintball with DC Solenoid and Aluminum Alloy Bubble Counter and Check Valve

  • DESIGN FOR PAINTBALL TANK. Connect to paintball CO2 tank, no adapter required, no assembly required..
  • 12V DC SOLENOID WITH PRECISION NEEDLE VALVE! This co2 regulator use 12V DC solenoid valve repalced AC solenoid valve, safer and more stable, lower....
  • BUBBLE COUNTER WITH CHECK VALVE FUNCTION! Come with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter....
  • CLASS 1 MANUFACTURING TECHNOLOGY! The co2 regulator is made of hard aluminum alloy, surface spraying treated..
  • ATTENTION: Only suite for paintball tank(Paintball tank is NOT included, for demonstration purposes only.Please fill up your paintball CO2 tank if you....
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Roykaw EZGO #70 Series Solenoid Relay with Resistor & Diode Kit for 36 Volt Golf Cart, 4 Terminal Continuous Duty, OEM # 27855G01 11761G1 27855G02 31680G1 3016, Upgrade Mount Bracket, Anti-Vibration

  • 36 Volt Continuous Duty Solenoid fits all 1986-up E-Z-GO 36 Volt Electric Vehicles and Yamaha's Electric G2 Model only.Package also includes Resistor and Diode,No need to purchase separately.Voltage: 36VDC.
  • Continuous Working Current: Less than 80Amp.
  • Contact Studs: 5/16 -24 Studs Standard & Long.
  • Mounting Holes: 5/16 x 19/32 2-13/64 on Center..
  • Function：4 Terminal Heavy-duty Solenoid play a role as a conduit between the golf car battery and the starter generator, providing the electrical power necessary to activate the vehicle's ignition system..
  • EZGO Electric Golf Car Relay replaces OEM part number:70-120224, 3016, 11761-G1, 27855-G01, 27855-G02, 31680-G1, Cole Hersee 24080, E-Z-Go 11761GA. Solenoid Resistor replaces OEM part number:21764-G1；Solenoid Diode replaces OEM part number:30353-G1..
  • Package includes:1*36 Volt Continuous Duty Solenoid, 1*Solenoid Resistor,1*Solenoid Diode..
  • Make sure your little diode is oriented correctly and the wire is pointing towards the positive side.If there is a problem with item, you will get replacement or refund. You will have best ever experience with us..
Check Stock

uxcell a13060500ux0006 Push Pull Type Open Frame Solenoid Electromagnet, 20N 4.4 lb, 10 mm, DC 24V, 350 mA

  • 【FEATURE】 DC 12V 300mA 5N Force 10mm Stroke Push Pull Solenoid Electromagnet.
  • 【GOOD DESIGN】Push pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet..
  • 【ADVANTAGES】 Simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity.
  • 【NOTED】As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds..
  • 【APPLICATION】DC solenoid electromagnet use in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc..
Check Stock

DJ TRANS PARTS – 45RFE 545RFE 68RFE Solenoid Pack – Quality and Tested OEM product – Compatible with Dodge, Chrysler, & Jeep – Years 2004 and Up | Warranty Included with Purchase (RENEWED)

  • COMPATIBLE WITH – Here is a list of products that is compatible with this item. Feel free to google the part numbers as well to ensure it fits your vehicle. Compatible with Chrysler 300 2010-11 Valve Body Solenoid, Chrysler 300C 2010-11 Valve Body, Chrysler Aspen 2007-09 Valve Body Solenoid, Dodge Avenger 2010-11 Valve Body, Dodge Challenger 2010-11 Valve Body, Fit for Dodge Charger 2010-11 Valve Body Solenoid, Dodge Dakota 2004-11 Valve Body Solenoid, Dodge, Durango 2012 Valve Body Solenoid..
  • PRODUCT IS REMANUFACTURED OEM PART– All of DJ Trans Parts items are original OEM products. That being said, they are not brand new but refurbished. They are remanufactured and tested to ensure they work. This means you are getting the actual transmission, valve body, solenoid kit, etc. that your car needs. You can ensure our products will work with OEM parts..
  • PART NUMBERS - Here are the related part numbers of this item - 5RFE 545RFE 68RFE Transmission Solenoid Block Pack.
  • INSTALLATION VIDEOS ONLINE - Searching related installation video on the internet will be recommended. You can find these videos on Google and searching the part numbers online. We recommend to always wear eye protection and start with installation tools..
Check Stock