Best Current Terminal

Frienda 6 Pieces 2-4 Gauge 175A Battery Quick Connector 12-36V Battery Quick Disconnect Wire Harness Plug Kit Battery Quick Connector Disconnect Plug for Motor Winch Trailer (Red)

  • Universal:Widely used in connect/disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups,trailers, or for any purpose requiring a high-current. Rated currents (amperes): 175 A.Rated Voltage: 600 V.Suitable for 1-2 Gauge..
  • Safe: Both ends are suitable for connection to the power or load side because of its identical connectors.The ends are made to connect only one way, making it impossible to connect the wrong polarities to one another, preventing accidental reverse polarity when hooking up a charger..
  • Suitable for low or medium current use. With 4 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to guarantee stable voltage and current..
  • Durable:Combined shell made from sturdy PC fire-retardant materials, allowing for over 10,000 connect/disconnect actions. With fitted rubber boot covers, protect against dust, moisture and corrosi..
  • Installation: Easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. Insert the terminal pins into the connector housing and lock them in place. (Package include：2 Dust Cover,2x Connectors ,4x Terminal pins.).
Check Stock

UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot

  • Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
  • Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
  • Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
  • Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
Check Stock

CZH-LABS DIN Rail Mount 2 Ports Passive RJ45 PoE Power Injection Board Power Over Ethernet Injector Module.

  • Simple Power up 2 Passive 10/100Mbps PoE devices by one power source Application use for Access Points, IP cameras, IP phones, etc..
  • Power Input terminal block for all PoE power supply, each port serial a recoverable fuse(fuse value 1.1Amp / 72V). Power Expansion Output terminal....
  • Switch On/Off to save electricity while not use, LED indication for switch On/Off status..
  • Specifications: Terminal Block Power Input: 12VDC - 60VDC, maximum current 10Amp.
  • Termianl Block Expansion Output: maximum current 10Amp.
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

Positive 36-inch 3/8” Positive Terminal Battery Replacement Cable, Heavy-Duty 2 AWG 100% Copper, 100mm Accessory Lead, 10mm Copper Lug End and 19mm Top Post Terminal, by Tech Team

  • When it comes to battery cables the LOWER the AWG number the HIGHER the current carrying capacity. Tech Team’s #2 AWG cables carry far more current than other #4 AWG, #5 AWG, or #6 AWG cables. This means less heat buildup and less voltage / amperage drop which prolongs the life of starters, inverters, motors, and other connected electrically powered devices..
  • Tech Team’s Positive Terminal Cable feature a 10mm – 3/8” diameter tinned double crimped 100% copper lug terminal end with a protective heat shrink polyolefin sleeves to prevent moisture incursion and eliminate corrosion and a military grade 19mm lead top post terminal with a 100mm accessory lead..
  • Tech Team’s battery cables are the best you will find anyplace and are the best possible option for Marine, Boat, Solar, Inverter, Motorcycle, Automobile, Tractor, Bulldozer, Excavator, Riding Mower, Golf Carts, and many other applications..
  • Includes one (1) red 36 inch #2 AWG 100% copper stranded wire top post positive terminal battery cable, a 100mm accessory lead, and a 100% copper 3/8” diameter tinned lug terminal end with heat a shrink protective sleeve..
Check Stock

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

  • {INSULATED FLAME-RETARDANT SHELL}: The shell of the battery quick connect/disconnect is made of high-quality PC flame-retardant material, with a fire rating of UL94 v-0, safe, wear-resistant, and compression-resistant, ensuring stability in use in complex and harsh environments.
  • {SILVER COPPER PLATED TERMINAL}: The thicker copper-plated silver of the battery quick connect disconnect set greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
  • the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
  • {SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
  • the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
  • {EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
Check Stock

Battery Cable Quick Connector 175A AWG 1/0 Towing Winch Quick Connect Systems for Winch Auto Car Trailer Driver Electrical Devices

  • Widely used in connect/disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups,trailers, or for any purpose requiring a high-current..
  • Material: PC fire-retardant materials+stainless steel.Rated currents (amperes): 175 A.Rated Voltage: 600 V.Suitable for 1-2 Gauge..
  • Connector Handle Makes disconnecting of connectors quick, easy and safe..
  • The heavy duty components are suitable for low or medium current use. With 4 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to guarantee stable voltage and current..
  • Package include：1 Battery Winch Trailer Quick Connector Handle,2 Dust Cover,2x Connectors ,4x Terminal pins..
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

micrl 2/0 AWG 350A Battery Quick Connect/Disconnect, Jumper Cable Plug Connector Kit for Recovery Winch, Towing Systems(Gray)

  • Suitable for: Gauge battery quick connectors provide a simple way to connect or disconnect winches trailers or for any other requiring high current, quick disconnect connectors..
  • Durable: The battery quick connect plug is made of sturdy PC fireproof material, equipped with a rubber boot cover to prevent dust, durable and reliable, not easy to break, and long service life..
  • Easy installation: Just insert the wire into the terminal pin, then solder or press, the connector ends are the same, so either end is suitable for connecting the power supply or the load side.
  • Stability function: There are 30 terminal pins made of red copper in the package, which are covered with silver and have strong conductivity, which can reduce resistance and ensure voltage and current stability.
  • You will receive: 15 sets of 12-36v battery quick connectors are included in the package, including 15 connectors, 30 terminal blocks and 15 covers..
Check Stock

Jienk 5Pcs 4-Pin 300V 8A KF2EDGK 3.5mm Pitch Screw Terminal Block Connector for 28-16AWG

  • 【Terminal Pitch】3.5mm/ 0.14inch pitch PCB terminal block connector..
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
  • 【Package Includes】: 5 x PCB Terminal Blocks..
Check Stock