Best Current Sensor Breakout

DUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..

DIN Rail Mount 4 x 2 Positions Banana Jack Breakout Board Module..
A and B position termianl blocks, maximum current 20 Amp (each position). Pitch 7.62mm/0.3.

The VL53L0X time-of-flight ranging sensor is new--generation laser ranging module, with a fully integrated sensor and built-in embedded infrared, eye-safe laser..
Advanced filter and ultra-high-speed photon detection array, the measurement distance is farther, and the speed and accuracy are higher..
Ranging measurements are available through the sensor's I2C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output..
The VL53L0X's LGA package makes it difficult to use. It also operates at a recommended voltage of 2.8V, which can make interfacing difficult for microcontrollers operating at 3.3V or 5V. Our breakout board addresses these issues, making it easier to use, meanwhile keeping the overall size as small as possible..
Package Content: 3 Pack VL53L0X time-of-flight ranging sensor..

SENSOR: 4K UHD 1/2.5 Progressive Scan CMOS sensor captures sharp and vivid UHD video even under very low light conditions.
PROCESSOR: Advanced digital imaging processor provides vivid and detailed images by utilizing Dynamic Range, Auto White Balance, and Noise Reduction.
MOTION VIDEO: Superb motion-compensated temporal noise reduction filter for motion video without blurring.
CONTROLS: OSD control breakout cable with power input and RS-485 for remote communication.
LENS MOUNT: Interchangeable lens design compatible with CS and C mount lenses.

High-quality material: The AC current transmitter is made of high-quality ABS material, which is strong and durable..
High accuracy: professional design of transmitter and receiver modules, mutual inductance current monitoring, high current detection accuracy, safe isolation of input and output..
Self-powered: The current sensor clip is self-powered, no external power supply is required, and it is easy to use..
Withstand voltage: The current sensor relay adopts a straight-through structure design, and the isolation withstand voltage is up to 2000V..
Application: AC current sensor is suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system, etc..

This product is a current detection module, mainly using the ACS758-LCB current sensor. The ACS758 consists of a precision, low-offset linear Hall sensor circuit with a copper current path close to the wafer. The current applied through the copper current path is capable of generating a magnetic field that can be induced by the integrated Hall IC and converted to a proportional voltage.003cbr003e.
Device accuracy is optimized by placing the magnetic signal close to the Hall sensor. The accurate, proportional output voltage is provided by a stable chopper-type, low-bias BiCMOS Hall IC that is factory-precisely programmed.003cbr003e.
The internal resistance of this conduction path is typically 100 μΩ with low power loss. The thickness of the copper wire allows the device to operate under high overcurrent conditions. The terminals of the conduction path are electrically isolated from the sensor pins (pins 1 to 3). In this way, the ACS758 sensor IC family can be used in applications that require electrical insulation without the use of opto-insulators or other expensive insulation techniques.003cbr003e.
Perform RC filtering on the output and use the op amp to build a voltage follower circuit to make the output more stable and better match the impedance of....

The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.

Comes assembled and ready to rock out of the box.
0.1" Breakout pads with 5V, D- and D+ data lines, GND and VBAT.
For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells).
100mA charge current, adjustable to 500mA by soldering a jumper closed.

❃❃ Package Included：3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
❃❃ACS712 Hall Effect Current Sensor Module：Chip: ACS712ELC-30A.
Pin 5V power supply, on-board power indicator.
❃❃Voltage Sensor Module：Voltage input range: DC0-25V.
input : Terminal cathode connected to VCC, GND negative pole.
Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
❃❃Perfect Combination：Using this product can measure both voltage and current, very suitable for DIY electronic design projects..