Best Cross Slide Vise For Drilpress

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..

Manufactured from close-grained cast iron for long trouble-free service.
Accurately machined housings assure smooth sliding movement.
Rapid Release via Counter-clockwise rotation.
screw will disengage and the front jaws slide freely.
Accurately fitted solid steel guide rods reduce wear and tear giving the vises a smooth and true parallel action, free of side or cross deflection.
Vise jaws are equipped with a “Toe–In” feature.
When fully closed, the jaws meet only at the top to provide even clamping on the whole depth of....
The steel main screw has buttress threads for smooth, accurate and responsive adjustment. Body and sliding jaw have provision for attaching wooden....

Table vise clamp : Aluminum body, Portable, vice for workbench quickly Clamps to surface.
360 Degree Swivel base allows rotating the vise for versatility.
Jaw opening: 2.16 in (55MM),vise stand, Non-slip textured surface increases the grip force of jaw, which firmly hold the material, save time and effort when you work.
Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods.
Ideal for Woodworking,Home Work Shop Vise, assembly,holding small parts in Jewelry, Model making, Electronics, general maintenance.

Body and sliding jaw are from high quality grey cast iron and this material has excellent shock absorbing qualities.
Slide rods and main screw from steel with a single start thread.
Fitted with an adjustable front stop (dog) which gives an additional clamping facility when used in conjunction with a bench stop, this also provides a nromal vise and a tail vise in one tool.
Quick release trigger to open and close the vise quickly without using the main screw.
For added safety, the tommy bar will bend before the vice becomes over-stressed.

...e hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is ideal for a variety of pulling app....

The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel..
Jaws are 3" x 3/4" / 79mm x 17mm with a 2" / 51mm opening, the clip has a wide enough opening for any workbench or table..
Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position..
Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods, The overall design of pliers has laid a good foundation for the smooth completion of your work..
Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more..

Durable cast iron construction, Powerful serrated steel jaws.
4 Inch Wide Jaw, Cold rolled steel screws.
2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing.
Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking.
3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel.

Durable cast iron construction, Powerful serrated steel jaws.
4 Inch Wide Jaw, Cold rolled steel screws.
2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing.
Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking.
3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel.

★Cross travel: 3.12" Longitudinal travel: 2.61".
★ Maximum jaw opening: 2.73"（80mm），Vise Specifications: 3".
★ Hand wheels feature machine-marked 0.1 mm increments for maximum precision 。Adjustment in X direction: 80mm. Adjustment in Y direction: 67mm..
★2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing.
★Hand wheel with adjustable scale:A ring=1.5mm.