Best Crankshaft Pulleys

LicBund 5/8" to 3/4 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Pulley Bore Reducer Bushing Sheave & Key Predator

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..

◇ Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
◇ Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
◇ Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
◇ The 12-inch (30.5cm) long small pin wrench Works with a 1/2 inch drive ratchet or breaker bar for an extended reach and added torque.
◇ Durable steel material with manganese phosphate finish provides maximum strength and resistance to corrosion.

This steel shaft sleeve adapts a crankshaft from 1” to 1-1/8” diameter. It comes with 1/4“ stepkey..
Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Part’s specification:Sleeve inside diameter 1”,Sleeve outside diameter 1-1/8”.
Sleeve length is about 3”,Sleeve Keyway slot 1/4”,Step Key Length is about 2”.
The sleeve and step key are designed to slip fit on your 1” diameter crankshaft with 1/4” keyway and enlarge it to 1-1/8 diameter with 1/4”....

【Applications】 Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.Not applicable to 99 F-150 supercharged 5.4L crank pulley..
【Specifications】 Wrench is adjustable from 1-1/2 to 8-5/8 inches, four different size step pins: 0.24-0.39in, 0.31-0.43in, 0.39-0.47in, 0.43-0.62in..
【Durable】 Wrench tools kits are made of 45# Carbon Steel steel, durability and high strength, great resistance to corrosion and rust..
【EFFICIENT】 Long handle enables technician to easily hold the pulley when tightening or loosening retaining Bolts. and does the work a lot faster Convenient and Saving your time and energy..
【Easy Storage】 Equipped with blow-molded plastic carry case for easy transportation, simple storage, and quick organization..

Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
Wrench is adjustable from 1-1/4 inches to 5 inches (3.2 to 12.7cm) by loosening single adjustment bolt.
Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
Works with Existing Tools : 12-inch (30.5cm) long pin wrench attaches to your 1/2-inch drive ratchet or breaker bar for an extended reach and added torque.
Blow Mold Case: The adjustable spanner wrench set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Product 1: OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
Product 1: Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
Product 1: Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
Product 1: Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
Product 2: Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
Product 2: Reverses to work on either 7/32 or 1/4 inch pinholes.
Product 2: Designed for use with a 1/2 inch drive ratchet or breaker bar.
Product 2: High-grade materials ensure quality performance over the lifetime of the tool.

... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.

This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch..
Alters motors with a different diameter shaft and alters pulleys for a different speed or belt..
Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements..
Adapts larger wheel bores to smaller axles, works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Made from cold rolled steel, precision machined and tumbled, high durability..