Best Crack Welding

20 Sticks Aluminum Welding Rods ,20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉,Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

  • MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

RadonSeal CrackWeld DIY Concrete Crack Repair Kit 2-Pack - Permanently Repairs Cracks in Basements Driveways Garages Patios & Pool Decks 2-Component Urethane Concrete Crack Filler Kit.

  • Permanently Repair Cracked Concrete Floors and Slabs - From Hairline up to 1/2 " Wide..
  • No Routing or Chasing the Crack Needed. Prepping the Crack Could Not Be Easier..
  • Low Viscosity 2-Component Urethane Fills the Full Depth of the Crack and Quickly Cures as a Rigid Polymer..
  • Complete Kit Includes All Materials - Use You Own Standard Caulking Gun.
  • Works by Welding the Concrete Together. Prevents Yawning and Further Crack Separation.
Check Stock

RX WELD 25PCS TIG Stubby Gas Lens 17GL332 3/32' & #12 Pyrex Cup & TIG Gas Lens Alumina Nozzle Kit Fit DB SR WP 17 18 26 TIG Welding Torch

  • This kit fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17,DB18 and DB 26 torches, along with the Weld craft WP-17, WP-18 and WP-26 torches..
  • 2pcs 3/32" 10N24S TIG Collet and 2pcs 3/32" 17GL332 Stubby Gas Lens.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • 4pcs #12 Pyrex Glass Cup 16mm and 10pcs Temperature Resistant O-rings.
  • 2pcs Cup Gasket and 3pcs Back Cup for Tig Welding Torch.
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
  • Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
  • PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock

Fibre-Metal Pipeliner Fiberglass Welding Helmet with Rubber Headband 110PWE White

  • Specially formulated SuperGlas Plus material and rugged construction to meet the needs of the most demanding welding environments.
  • Impervious to moisture, impact resistant Pipeliners will not crack, chip or split..
  • Compact design allows access to areas where there is no room for a standard helmet.
  • Comfortable, functional headgear uses a constant-fit rubber headband for frequent re-adjustments as pipe welders move about their work.
Check Stock

Ferrule Compression Fitting 2Pcs Firm 304 Stainless Steel for Hydraulic Line(Ф12*8)

  • The surface of the connector is finely ground with a special process, the hand feel is glossy and delicate, the interior is cleanly and bright, and the ruler can be accurately controlled.
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble.
  • Come with firm connection, high pressure resistance, tightness and repeated installation, simple and convenient installation and maintenance, safe and reliable work.
  • Used for hard tube conversion hose and need to penetrate the wall and board occasion.
  • No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can the disadvantages caused by careless welding.
Check Stock

Ferrule Compression Fitting 2Pcs Firm 304 Stainless Steel for Hydraulic Line(Ф12*10)

  • The surface of the connector is finely ground with a special process, the hand feel is glossy and delicate, the interior is cleanly and bright, and the ruler can be accurately controlled.
  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble.
  • Come with firm connection, high pressure resistance, tightness and repeated installation, simple and convenient installation and maintenance, safe and reliable work.
  • Used for hard tube conversion hose and need to penetrate the wall and board occasion.
  • No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can the disadvantages caused by careless welding.
Check Stock