Best Corner Cutter Machine

Montolit Masterpiuma 93P5 Power 5 Ergonomic Manual Tile Cutter 36" (93cm) Cutting Tool For Tough and Delicate Large Format Glass and Ceramic Tiles for Floor and Wall Tile Installation

  • Montolit tile cutter 93P5 is suitable for cutting tiles up to 36" in length, supports diagonal cutting up to 26"x26" in size, and can cut tiles up to 3/4" (2cm) thick.
  • The Montolit ceramic tile cutter frame is sized and structured in the points of greatest stress with the insertion of “reinforcement brackets” that optimize the machine's behavior for front cuts, thick cuts, or full-body porcelain..
  • The tile cutter hand tool features an oversized goniometric square that can rotate both to the right (+ 45 °) and to the left (- 45 °), allowing precise cuts at different angles.
  • An expanded ceramic cutter support surface or robust die-cast aluminum wings are perfectly integrated into the frames, ensuring improved support to large tiles with diagonal cuts without leaving the machine profile.
  • The tile cutter features a double trestle splitting, which can be closed for normal cuts and opened for cuts on the corner or for mosaic ceramic tile sheets.
Check Stock

STOBOK 8 pcs Tool School&Home Photo Round Punch Projects Orner Trimming Board Scrapbooking Card Picture Rounder Creative Accessories Making Trimmer Handicrafts Hole Blue DIY Paper

  • Handicrafts Corner Rounder: 【 and Sturdy】Made of ABS, stainless steel, enough to cut neatly and smoothly,.
  • Practical Trimming Tool: 【Wide Application】Practical corner trimmer is suitable for use in offices, schools, homes and photo studios. Works on paper, photos, gift cards, cardstock, greeting cards..
  • Practical Corner Trimmer: You can present the paper corner trimming machine to your friends who like DIY making..
  • Convenient Corner Trimmer: Humanized Design: Behind the cover, the bottom of the lid can be opened, very convenient to clean wastepaper..
  • Trimming Tool For DIY: This is a portable and practical corner cutter, not easy to rust, no burrs during cutting..
Check Stock

STOBOK 8 pcs Scrapbooking Envelope School&Home Photo Board Card Picture Crafts Trimming Puncher DIY Round Projects Punch Making Accessories for Convenient Punches Handicrafts Blue Cutter

  • EARRING CARD PUNCH-- The round corner device with the upper die with the lower die cut out of stainless steel, cutting paper will not by rough edges..
  • CONVENIENT TRIMMING TOOL-- CORNER TRIMMER CUTTER : Easy to Carry: Small size and light weight will not increase your extra space and burden..
  • PICTURE CORNER CUTTER-- 【Variety of application】Suitable for plain paper, aluminum foil, kraft paper, , can be for a long time, not easy to or deform..
  • CUTTER CORNER ROUNDER-- Suitable for business card, paperboard, dermatoglyph paper, craft paper, PVC cover, photo, DIY,.
  • ROUND CORNER PUNCH-- 【 and Sturdy】Made of ABS, stainless steel, enough to cut neatly and smoothly,.
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Rayson CRP4MMBK-US Corner Rounder Punch 4mm Corner Cutter Tool Black

  • Corner rounder cutter to round or trim the sharp corner of paper with 4 mm cutting radius.
  • Stainless steel blade, durable, a good tool to round or trim the sharp corner of all kinds of photos, cutting paper, laminated documents, gift card,....
  • Base works as a trash tray, contains the shreds, convenient, easy to clean up.
  • Rayson 4mm corner rounder trim paper punch card photo cutter tool..
  • Cutting Range: Plastic material or Paper.
Check Stock

QLGCJ 4mm Radius Corner Rounder Punch Paper Corner Rounder Paper Hole Cutter for Photo Paper,Black, one size

  • Corner rounder cutter to round or trim the sharp corner of paper with 4 mm cutting radius.
  • Stainless steel blade, durable, a good tool to round or trim the sharp corner of all kinds of photos, cutting paper, laminated documents, gift card, or carton etc..
  • Base works as a trash tray, contains the shreds, convenient, easy to clean up.
  • QLGCJ 4mm corner rounder trim paper punch card photo cutter tool..
  • Cutting Range: Plastic material or Paper.
Check Stock

Drain Cleaner Machine, 100FT x 3/8'' Electric Drain Auger Fit 1'' to 4'' Pipes, 370W Professionals Drain Cleaning Plumbing Sewer Snake Machine w/Wheels, Cutters, Foot Switch

  • ...an still maintain human toughness after long-term use. It can clean the sewer blockage of 1″ to 4″ pipes, easily clean complex pipes through multiple 90-degree bends, you are allowed to change the cable movement’s direction by turning the control handle..
  • 【Triple Security Control】- In normal operation, the machine rotates clockwise (CW) in the direction of the arrow.
  • When the cable is stuck and kinked, it will rotate counterclockwise(CCW). Built-in GFCI (ground fault circuit interrupter) attached to this electric drain snake avoids electrical shock, ensuring your security..
  • 【Four Shapes of Cutters】- 4 different shapes of cutters are included: Boring bulb cutter, c-cutter, spade cutter, and two arrow cutters. The quick-change design makes the cutters easily connected or disconnected. Multiple attachments contribute a lot to clear away various blockages. Different tools are used in different pipelines to meet the needs of heavy work. (TIPS: Use small spade cutter when cleaning corner pipes.).
  • 【Portable Drain Cleaning Machine】 – The junction box adopts an open design, which is easy to clean the machine. You can observe the cable length and deal with it when kinking occurs. The heavy-duty rubber wheels are easy to carry and move in the w....
Check Stock

Crenova 13 inches Laminator with Paper Cutter, A3 Laminating Machine with 40pcs Laminating Sheets, Corner Rounder, Puncher, 3 Binder Rings

  • 【All-In-One Kit】The A3 laminator comes with all must-have accessories, including 1 paper cutter (combined with laminator), 1 corner rounder, 1 hole punch, 3 binding rings and 40 thermal laminating pouches (10 x A3/A4/A5/ A6)..
  • 【Widely Application】The size of the laminating machine is 17.3*5.9*2.9 inches, and laminates 80-125mic/3-5mil pouch with maximum width of 13inch/330mm. Applicable to A3/A4/A5/A6/A7 size paper. Such as photos, certificates, menus, paintings, cards, tags, kids'artworks etc..
Check Stock