Best Copper Water Pipes

Liquid-Plumr Advanced Action Clog Destroyer Gel with PipeGuard, 32 Fluid Ounces Each, Pack of 2

  • DRAIN CLOG REMOVER: Liquid-Plumr Advanced Action Clog Destroyer Gel with PipeGuard dissolves tough clogs, prevent new ones from forming, and remove unpleasant odors.
  • DEODORIZES AND FRESHENS: Advanced Action drain opener is a drain deodorizer and cleaner and works great on bathtubs, bathroom sinks, showers, kitchen sinks and garbage disposals.
  • WORKS ON MULTIPLE CLOG TYPES: This gel clog remover tackles the toughest clogs from hair, grease, and soap scum and cuts through standing water to cleat total blockages.
  • SAFE ON ALL PIPES: Made with PipeGuard, this Liquid-Plumr drain cleaner protects pipes and is safe for septic systems, disposals and pipes, including PVC, plastic, copper and old drain pipes.
  • MAINTAIN CLEAR PIPES AND DRAINS: When used monthly, Liquid-Plumr drain clog remover with PipeGuard prevents clogs from coming back.
Check Stock

Brass Compression Fitting Ferrule [08CS] Sleeve Tube Fitting (1/2\ Tube OD)

  • Brass Sleeve Assortment Kit contains 3 sizes brass sleeve ferrules : 1/4'' 3/8'' 1/2'', 50 of each size for a total of 150. Comes in a clear plastic case.
  • High-quality material: Made of high-quality brass, corrosion resistance, high pressure resistance, temperature resistance, good sealing, and can be used for a long time..
  • Working Range: 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)..
  • Wide range of use: No need for flare tools, easy to install. Can be used on hoses, plastic pipes, copper, aluminum, 304 stainless steel pipes, and other rigid pipes.
Check Stock

HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black

  • Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid..
  • Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
  • Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
  • Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
Check Stock

VEVOR Hydraulic Pipe Crimping Tool, 8T Hydraulic Copper Tube Fittings Crimper, Copper Pipe Crimper 40CR Steel, Copper Crimping Pliers with Jaws 1/2'(12.7mm), 3/4'(19.05mm), 1'(25.4mm)

  • Excellent Crimping Ø12-25 MM: It features excellent workmanship and crimping performance, more labor-saving. Great for pipe fitting, it crimps the pipes in seconds, for 1/2", 3/4", and 1" pipes..
  • Premium Material: The pipe crimping tool is constructed of 40CR steel with punching and forging process and powder-coated treatment to ensure integrated mechanical property..
  • Ergonomic Handle: Safe handling with slip-proof rubberized handle grips, anti-static. The handle can be elongated to use the lowest energy..
  • Easy to Operate: The distance between two mechanical levers is adjustable. The interchangeable jaws can be changed effortlessly..
  • Wide Application: A labor-saving tool for copper pipe connection, not for PEX pipes and other pipes. Suitable for copper fittings and copper joints, clamping copper sleeve..
Check Stock

ZUIWAN Compression Ring Removal Tool,Pipe Olive Remover Puller Tool, fit for 5/8” and 7/8” Ferrule Olive Rings,Compression Sleeve Puller,Solid Brass

  • ★High quality materials★ The pipe olive remover puller tool is made of excellent brass alloy which is characterized by high hardness and high wear resistance.Anti rust and anti-corrosion materials enable him to last long..
  • ★2 specifications★ The compression olive puller is fit for copper pipes with a diameter of both 5/8”(15mm) and 7/8”(22mm)..
  • ★Wide application★The ferrule blaster can be used for many kinds of pipes, such as kitchen, air conditioner, toilet and more..
  • ★Less time and less stress★ The olive remover can remove the old ferrule quickly and without damaging the copper pipes..
  • ★Must have★ A must have tool for plumbing with rigid copper pipes & valves..
Check Stock

EZARC Pipe Cutter - Tubing Cutter Set with Mini Tube Cutter, Copper Pipe Cutter Tool 3/16\ to 2\ Outer Diameter for Cutting Aluminum PVC Thin Stainless Steel Tube

  • ...s with an outer diameter of 3/16 to 2 inches and a thickness of 1/10 inch. The mini tubing cutter is designed to cut through 1/8 to 7/8-inch pipes, with a maximum thickness of 1/10-inch. It is particularly useful in tight spaces where a full turn is not possible..
  • ✅【Exquisite Craftsmanship】This heavy-duty copper tubing cutters are made with heat-treated SKD-grade material cutting wheels and high-grade steel construction. This exquisite craftsmanship ensures they can effectively cut pipes made of aluminum, copper, PVC, as well as thin stainless steel tubes..
  • ✅【Clean & Precise Cut】EZARC professional copper pipe cutter set comes equipped with 6 individual bearings that allow for increased cutting speed. Precise rolling control ensures that each cut is smoother and more accurate, resulting in a cleaner and more precise cut during pipe cutting..
  • ✅【Various Cutting Materials】Our copper pipe cutter is versatile and can cut pipes with an outer diameter ranging from 1/8" to 2". It's perfect for cutting heavy-duty hard materials such as thin stainless steel, as well as all soft tubes like aluminum, copper, and PVC..
  • ✅【Cutting Efficiency】Our copper cutter features a solid ergonomic PVC knob located at the bottom, providing stability whil....
Check Stock

Pipe Reamer Tool [Plumbers Efficient Helper] Deburring Tool 1/4 to 5/8 Inner/Outer for Copper PVC Pipe Cleaner Stainless Steel Tubing and Pipe Reamer

  • 【Efficient Deburring】Plumber is here! This pipe reamer tool makes smooth work of cleaning up the ends of copper and plastic pipe for better....
  • 【Excellent Grip】This pipe deburring tool has a metal casing that does not deform easily during operation like plastic, which enhances safety, and....
  • 【Deburring Tool for Copper Pipe】There are 4 solid stainless steel reamers inner and outter, enough to deal with PVC pipes and copper pipes, and....
  • 【Small Diameter Friendly】This pvc pipe reamer tool adapts to pipes in the OD and ID range of 1/4" to 5/8", so you can apply it to narrow pipes..
  • 【Portable Debur Tool】2" diameter & 2.36" height, it won't take up too much space in the toolbox, easy to carry. With a good painting process, the....
Check Stock

E-outstanding Compression Ferrule Sleeve 50PCS 4mm Brass Double Taper Ferrule Pipe Tube Fittings

  • Brass Sleeve Assortment Kit contains 3 sizes brass sleeve ferrules : 1/4'' 3/8'' 1/2'', 50 of each size for a total of 150. Comes in a clear plastic case.
  • High-quality material: Made of high-quality brass, corrosion resistance, high pressure resistance, temperature resistance, good sealing, and can be used for a long time..
  • Working Range: 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)..
  • Wide range of use: No need for flare tools, easy to install. Can be used on hoses, plastic pipes, copper, aluminum, 304 stainless steel pipes, and other rigid pipes.
Check Stock

Electric Water Pipe Heating Cable with Thermostat for Pipe Freeze Protection, 6ft 120V Snow De-Icing Cable with Build in Thermostat, Pipe Warmer, Heat Pipe Tape - CSA/ETL Listed

  • ✅ 003cb003e[100% Money-Back Guarantee] 003c/b003e--Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Buy with confidence!.
  • ✅ [High quality]--UL, ETL and CSA certified,more safer to use.Industrial grade heat shrinkage tube for connection.Each Cable consists of tough XLPE inner insulation, AL foil, a continuous ground braid as well as weather and non-supportive climatic conditions resistant PVC (high-low temperature) outer coating. Can convert 100% of electrical energy into heat without energy loss..
  • ✅ [Note]--Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material..
  • ✅ [Application]--Suitable for use on water filled plastic ((including PEX)and metal water pipes(including copper, galvanized, ABS plastic, PVC plastic pipes, etc).Not use for empty water pipes, fuel lines, hoses, gutters, steam lines and so on.Keeps water flowing down to -40℃..
Check Stock