Best Copper Rod Stock

Panther Marine 55-2600 Auxiliary Motor Steering Kit - Stainless Steel

Brand New RockJock Jeep TJ/LJ/XJ/MJ/ZJ Currectlync Steering System (Part #CE-9701).
Compatible with: 1997-2006 TJ/LJ Jeep Wranglers, 1984-2001 XJ Cherokee, 1993-1998 ZJ Grand Cherokee, 1985-1992 MJ Comanche.
The RockJock Currectlync heavy duty tie rod and drag link system for TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 1/4″ diameter forged alloy drag link, and 1 1/4″ solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket..
This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components..
NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment..

Check Stock

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

Check Stock

ARES 48001 – External Rotary Deburring & Chamfer Tool (13-36mm) – 3/8-Inch Shank for Use with Drill or Hex Driver - Clean and Repair Threaded Fasteners, Studs, and Bolts

...lts and tightens the nuts in place without hurting your hand, no sparks, and no burns.
Simplifies the repair process. The internal deburring tool with 5 flute bit design allows it drilling smoothly in metals, and it can even drill counter sinks..
【Wide Application】Effective on metal, stainless steel, mild steel, copper, brass, fiberglass Outer chamfer tool works on round stock bar stock, threaded rod, screws etc. Inner chamfer tool works on steel pipe, iron pipe, stainless steel pipe, copper tube, aluminum tube, hard plastic tube..

Check Stock

Eoiips 1” Pure Copper Round Rod 1”Diameter 9.84 in Length for Metal Craft & Metal Working Hobbies 1pcs

1pcs. Please allow a deviation of 0.1 inch - 0.2 inch in length..
【High Purity Copper】Eoiips copper round bar is made of pure copper(C110) with a copper content of 99.9%. The surface of the copper rod is smooth without seams and no pores..
【Features】The metal rod made of pure copper has good electrical and thermal conductivity. can be processed according to your needs..
【Wide Application】Applied to electrical and thermal conductivity equipment, it can be welded. It can also be used for metal craft & metal working hobbies, DIY model making..
【Warm tips】 Due to the nature of metallic copper, the surface may oxidize, which does not affect use. Polish with fine sandpaper to restore gloss..

Check Stock

Tynulox 1Pcs Pure Copper Round Rod 1/2 12mm Dia 8 Length Bare Copper Cu Metal Rod for Metal Craft Hobbies

❀---- Size: 1/2" Dia (12mm), Length: 8" (200mm), 1Pcs.
❀---- Material: 99.9% Pure copper. 110 copper has a metallic luster and excellent electrical conductivity and thermal conductivity..
❀---- Excellent Conductivity: 99.9% copper has good strong heat transfer capability and electrical conductivity. In addition, it isn’t affected by corrosion, temperature and pressure..
❀---- DIY Decoration: You can cut the copper rod by yourself to choose the desired length..
【Multiple Sizes】: You can choose diversiform sizes of copper rod. (Dia:3~25mm, Length:100~250mm)..

Check Stock

Bonsicoky 2Pcs Ground Bus Bar Terminal Block, 5 Terminal Positions Wire Screw Terminal Brass Electrical Grounding Bars Block

【Better electrical performance】: The excellent electrical conductivity of the copper material on the surface of the copper-clad steel grounding electrode makes its own resistance value much lower than that of conventional materials..
【Wide range of applications】: Copper-clad steel grounding electrodes are suitable for grounding construction under different soil moisture, temperature, PH value and resistivity changes..
【Low construction cost】: Compared with the traditional construction method of pure copper grounding rod and grounding strap, the cost of copper-clad steel grounding electrode is greatly reduced. (Moreover, it has the strength that the pure copper ground rod cannot reach)..
【Unique manufacturing process】: The copper-clad steel grounding electrode adopts a cold-rolled and hot-drawn production process to achieve metallurgical welding between copper and steel. So as to ensure the perfect combination of copper layer and steel layer, it can be drawn arbitrarily like drawing a single metal without disjointing, peeling and cracking..
【Superior corrosion resistance】: The copper clad steel ground electrode composite interface adopts high temperature 4D electroplating, the surface copper layer is ≥0.254mm/10mils, there is no resi....

Check Stock

Tynulox 2Pcs Pure Copper Round Rod 1/4 7mm Dia 7.87 Length Bare Copper Cu Metal Rod for Metal Craft Hobbies

❀---- Size: 1/4" Dia (7mm), Length: 7.87" (200mm), 2Pcs.
❀---- Material: 99.9% Pure copper. 110 copper has a metallic luster and excellent electrical conductivity and thermal conductivity..
❀---- Excellent Conductivity: 99.9% copper has good strong heat transfer capability and electrical conductivity. In addition, it isn’t affected by corrosion, temperature and pressure..
❀---- DIY Decoration: You can cut the copper rod by yourself to choose the desired length..
【Multiple Sizes】: You can choose diversiform sizes of copper rod. (Dia:3~25mm, Length:100~250mm)..

Check Stock

Sutemribor 2PCS Copper Round Rod, 3/16 Inch in Diameter 6 Inches in Length for Knife Handle Material, Bolsters, Metal Craft & Metal Working Hobbies

YOUR USA HANDCRAFTED DOWSING ROD KIT includes a pair of 99% pure COPPER dowsing rods with copper handles that have a Ethiopian Copper handcrafted end bead plus a beautiful copper pendulum. Both great tools for dowsing minerals, water witching, ghost hunting, spirits, intuitive balancing Paranormal research.
COPPER is an excellent choice, not only for its durability, but also because copper is an excellent medium for a highly responsive dowsing activity. Copper is a great conductor of electromagnetic and subtle energies, and so makes a great dowsing tool for accessing information of all kinds..
The DIVINING RODS MEASURE 14” LONG, the COPPER HANDLE is 4.5”. The longer length rod makes them HIGHLY SENSITIVE. The COPPER PENDULUM measures 3/4" and the COPPER chain is 6" with a decorative COPPER bead at the end..
BEST DOWSING INSTRUCTION MANUEL link is including in the package that you’ll receive to introduce you to dowsing and it will answer all your questions, I myself personally used it and I have been dowsing for over 25 years..
LIFETIME GUARANTEE is what we offer on the dowsing rods because the ART OF DOWSING is something you will using for the REST OF YOUR LIFE.

Check Stock

Synergy Jeep JK Heat Treated Tie Rod (8002)

Heavy duty tie rod for Jeep JK Wranglers.
Bent similar to factory bar to clear sway bar mounts.
Made from 1 3/8" 4130 Chromoly and Heat Treated for maximum strength - 200% stronger than stock tie rod.
Synergy Double Adjuster Sleeve: allows adjustment of tie rod length without removing it from the vehicle.
Strongest Jeep JK Tie Rod on the market!.

Check Stock