Best Copper Alloy Bearings

uxcell Bearing Sleeve 8mm Bore x 12mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 3pcs

  • Bore: 8mm, Outside Diameter: 12mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 10mm Bore x 16mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 6pcs

  • Bore: 10mm, Outside Diameter: 16mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 6mm Bore x 10mm OD x 6mm Long Self-Lubricating Sintered Bronze Bushings 10pcs

  • Bore: 6mm, Outside Diameter: 10mm, Length: 6mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

Ski-Doo OEM Chaincase XPS Synthetic Oil/Lube/Lubricant Chain/Gear Case Fluid 12oz 293600138

  • GEAR LUBRICANT: GL-4 Multi-Purpose Gear Oil has low pour points and high temp properties to provide lubrication over a wide temp range. Our formula contains anti-rust and anti-wear EP additives to provide corrosion protection in drives and hypoid gears..
  • MULTI-PURPOSE: Our formula is not corrosive to copper.
  • or other non-ferrous alloy bearings and bushings..
  • APPLICATIONS: This multi-purpose oil is suitable in use for auto.
  • and differentials requiring API/GL-3 and GL-4 oils. Safe for use on yellow metals..
  • PRODUCT SPECIFICATIONS: This product is available in a 1 gallon bottle..
  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain.
  • household tools and electrical equipment..
Check Stock

Mimoke Bicycle Disc Brake Hub Front & Rear for MTB Freehub with 32 Holes 6 Bolt Quick Release Lever

  • Axles 7075 aluminum alloy ,Hub shell 6061 aluminum alloy , aluminum alloy material has super corrosion resistance, rust resistance. CNC Precision Technology Disc Brake, stable, durabl.
  • High efficiency and excellent sound. The classic freewheel system with 6 bolt /72 Clicks ..
  • 32-hole rear hub (QR), compatible with Shimano 7-11 speed and Sram 7-10 speed.
  • 6 Bolt 72 Clicks , 2 sealed bearings, Front: 9 x 100 mm, rear: 10 x 135 mm (with standard 5 mm diameter quick release) 32 holes, Precision-machined NBK bearings, low friction, strong sealing, can effectively isolate water, mud and dirt.
  • package contains two quick-release levers, which are easy to install and quick to remove!.
Check Stock

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • ...eburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel tubing.Long-wearing alloy steel blades can extend the lifetime..
  • 【Good Helper】Our tubing cutter set is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mech....
Check Stock

Toledo Pipe H4S 2\-4\ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels

  • [Large Cutting Capacity] The cutter can cut 3/16 to 2-inch outer diameter and 1/10-inch thick pipe..
  • [Small Cutting Capacity] The cutter can cut 1/8 to 7/8-inch pipes with a maximum thickness of 1/10-inch. It can be used in narrow environments without restrictions..
  • [Deburring Tool] The deburring tool is made of solid plastic structure and high-speed steel. It can be quickly, cleanly and conveniently applied to the inner diameters of different pipes..
  • [Wide Application] The pipe cutting tool is very suitable for cutting heavy hard materials such as thin stainless steel and all hoses such as aluminum, copper and PVC..
  • [High-Quality] The alloy steel cutting wheel and high-grade steel structure after heat treatment are wear-resistant and rust free. The cutter kit has 6 independent bearings to increase the cutting speed. Accurate rolling control makes every cut in the pipe cutting process smoother and more accurate..
Check Stock

Riedell UPTOWN 120 BR Mens Rhythm Skates 2009 - Size 5

  • TOP QUALITY CRAFTSMANSHIP - These precision bearings come equipped with hardened Swiss chromium steel alloy balls that can endure long-lasting use..
  • OPTIMIZED DURABILITY - The KwiK Swiss Nitride bearings use a Titanium Nitride coating. This coating does not chip, flake, or degrade during prolonged rough use..
  • CORROSION RESISTANT DESIGN - The KwiK bearings' Titanium Nitride-coated races resist corrosion. They also provide strength and smoothness to create a performance with the greatest roll..
  • FRICTION RESISTANT RETAINERS - These bearings come equipped with friction resistant Delrin retainers that are pre-spun with high-performance oil..
  • SLEEK & LUXURIOUS DESIGN - The 8mm skate bearings come with a metallic gold finish, a design that is worthy of its performance. This product is not a children's product and is not designed or intended for use by children 12 years of age or younger..
Check Stock

Huanyu Mini Belt Sander 360W Electric Polishing Grinding Belt Machine 1.2\ x 21\ Micro Knife Sharpener DIY Bench Sanding Machine with 9 Belts for Metal Wood Aluminum Adjustable Speed

  • [795 high-power DC motor & dust cover] pure copper wire, front and rear bearings, quiet work, 360W strong power, durable. The motor cover is customized to prevent dust and reduce the impact of dust on the performance of the sander during work..
  • [Automatic deviation correction & speedless speed regulation] The main wheel rib design avoids the belt deviation.
  • the motor is separately provided at 12000rpm under 24V, and the load working rotation is still high-speed rotation at 0-4800rpm. Suitable for grinding high-speed steel, stainless steel, iron, soft metals, wood, plastics, etc..
  • [Belt size] 9 belts with different Grit(the larger the number, the smoother the polishing).
  • the size is 1.2" x 21" (30MM*533MM). If the crafts are small, the narrow belt will be more convenient. We also have 0.8” x 21” (20MM*533MM) abrasive belt for you to choose..
  • [High-speed driving wheel] The driving wheel is made of aluminum alloy.
  • the three auxiliary wheels are all made of NSK bearings, working quietly, and basically only the sound of belt rotation can be heard..
  • [24V-360W-15A DC motor power supply] High-durability aluminum housing, equipped with intelligent temperature fan, fast cooling.
  • built-in switch to make 110/220V optional.
  • *[Be sure to select the correct voltage....
Check Stock