Best Coolant Through Carbide Drill

GSTK Upgrade Heavy Duty Carbide Hole Saw 14 Pcs,Metal Steel Hole Saw Drill Bit,TCT Hole Cutter,Alloy Hardness Upgrade, with 2*Extra Titanium Plated Pilot Center Drill and 2*L-Wrench

  • 12 of sizes to meet your different needs: 14mm(9/16”), 16mm(5/8”), 19mm(3/4”), 22mm(7/8”), 25.5mm(1”), 29mm(1-1/8”), 32mm(1-1/4”), 35mm(1-3/8”), 45mm(1-3/4”), 51mm(2”), 54mm(2-1/8”)&2*Extra Titanium Plated Pilot Center Drill and 2*L-Wrench.
  • Our hole saw is made of high quality TCT Carbide( Tungsten Carbide Tipped Cutters), ensures its high hardness, rust proof and heavy duty. And the center drill adopts with high accuracy, it’s hard to break..
  • Tipped tooth blade,faster cutting experience. Double round circles to remove metal filings easily and efficient cooling. Eligible for rechargeable drill,portable hand drill,bench drill,eletric drill and etc..
  • Ideal for stainless steel, metal, iron, and plastic, aluminum, FRP, etc. so on. (test for your reference: it apposite to cut a hole on 3mm stainless steel,15mm iron plate,15mm aluminum alloy.).
  • For safety purposes, remember to add coolant during continuous high-speed drilling, and please wear protective goggles and gloves when using our hole saw set..
Check Stock

Drill America - DAM18X1/4 1/4' x 18' Carbide Tipped Masonry Drill Bit, Dam Series

  • Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Designed for use in portable electric drill.
Check Stock

AUTOTOOLHOME TCT Hole Saw for Steel Tungsten Carbide Tipped Hole Saw Drill Bit T.C.T Hole Cutter with M2 Titanium Plated Pilot Drill Bit Professional for Hard Metal Stainless Steel Cast Iron (2-3/8\(60mm))

  • ...drill presses, bench drills,hand held electric drill,impact drill,magnetism drilling machine and so on..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body with chip hole,Fast chip removal, then cuts a clean, burr-free hole faster than conventional twist drills or hole saws.Remember to add coolant during continuous high-speed drilling..
Check Stock

Amana Tool 217013 Solid Carbide Dowel Drill Bit Through Hole Boring Drill Bits 3mm D x 70mm Long x 10x25mm SHK Right Hand

  • DOWEL DRILL BIT – The Through Hole Solid Carbide Dowel Drill Bit is designed to drill and bore clean holes through hard and soft woods..
  • DESIGNED FOR – This 3 mm boring bit for doweling allows you to create dowel joints with your handheld drill..
  • CREATE CLEAN HOLES – Use the dowel bit to create clean, straight, and accurately sized holes in wood..
  • SOLID CARBIDE-GRADE – Special solid carbide through hole boring bit made for long-lasting cutting edge performance and tool life..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

COMOWARE Masonry Drill Bit Set 10 pcs, Concrete Drill Bit for Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Cr45 Material

  • What you receive: you will get 12 pieces glass concrete drill bit set, with the size of approx. 6 mm, fitting your daily needs.
  • It can be installed in the general electric hand drill, bench drill.
  • The machine drill clamp range is 10 mm and above.
  • Reliable to use: the masonry drill bits are made of quality alloy, sturdy and reliable, anti-rust and wear-resistance.
  • With a reinforced head and nice hardness prevent bit cracking, it can provide a longer life.
  • Easy to use: designed with 1/4 inches hex shank, the carbide tip drill bit can be applied to all power tools more easily and securely, which will drill faster and smoother, saving your time and efforts.
  • Wide applications: the drill bit set can be applied to drilling glass, tile, ceramics, wood, marble, concrete, etc..
  • You should note that you have to remember to add water or coolant when drilling continuously.
  • Fine function: this glass and tile drill bit has a small incision and fine drill edge, the hole is smooth and complete, without leaving burrs, which will give you wonderful experience.
Check Stock

SNUG Fasteners Five (5) 5/32\ x 5-1/2\ Carbide Tip Masonry Drill Bits for Concrete, Brick, or Block (SNG534)

  • ❶HIGH-QUALITY HARD ALLOY: The cutter head is made of cemented carbide. Hardness up to 45HRC, Triangular cutter head resistance is smaller. And it can improve work efficiency, higher hardness than ordinary drill bit, more wear-resistant..
  • ❷EXQUISITE CRAFTSMANSHIP: The surface of the drill bit is treated by fine polishing, and the new electroplating process can prevent the drill bit from rusting and prolong the life of the drill bit..
  • ❸10 PCS DRILL BIT SET WITH 6 DIFFERENT SIZES: 5/32” (4mm), 3/16” (5mm),1/4” (6mm), 5/16” (8mm) ,3/8” (10mm), 1/2” (12mm) fit your different needs..
  • ❹NEW DESIGN: U-shaped drain groove, spiral handle design, easy to remove chips during work, smoother drilling..
  • ❺WIDELY USAGE: It can be used for drilling walls, bricks, ceramic, wood, glass, tiles, stainless steel, concrete, etc. Remember to add Water or coolant when drilling..
Check Stock

uxcell 2pcs 35mm Diamond Drill Bit Hole Saw for Watt Glass Marble Fiberglass Ceramic Tool

  • Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
  • Nickel plating on these bits maximizes your tools life with great resistance to corrosion..
  • Side holes allow for easy slug removal after drilling..
  • Suitable for cutting accurate holes on glass, ceramics, porcelain, ceramic tile, porcelain tile etc.. Not suitable for drilling tempered glass, plastic and wood..
  • Please use at low drill speeds and drill pressure. Always work with coolant (water) when drilling. Not suited for use on concrete or for depths beyond about 1/2 inch..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock