Best Coolant Through Boring Bar Adapter Sleeve

Auliuakz Boring Bar Set,9pcs HSS Material 1/2 inches Round Shank Boring Bar Set Machine Tool Accessories

  • Boring Bar Set:Made of high quality HSS material, high hardness, wear resistance and heat resistance..
  • Boring Bar Set:9 kinds of boring bar of different lengths to meet your different needs..
  • Boring Bar Set:Boring bar can be used on boring machine, lathe or milling machine..
  • Boring Bar Set:Excellent workmanship to ensure high accuracy..
  • Boring Bar Set:The handle of boring bar is thicker, more durable..
Check Stock

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

Laboy Glass Liebig Condenser with 24/40 Joints 300mm in Jacket Length Used in Reflux or Distillation Aapparatus Chemistry Lab Glassware with 10mm Glass Hose Connections

  • ....As jointed glassware part,it is usually used with a round bottom flask,a three way distillation adapter,a take off adapter to assemble a distillation or reflux setup..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connectionsconnecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With the jacket length of 300mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisely grounded according to US standard..
  • BUY WITH CONFIDENCE----100% 90 DAY MONEY BACK GUARANTEE simply return for a full refund,no question asked.
Check Stock

Laboy Glass West Condenser Liebig Reflux Distillation Column with 24/40 Joints 190mm in Jacket Length Organic Chemistry Lab Glassware with 10mm Glass Hose Connections

  • ...ser,with narrow annular space that allows for the increased flow rate of water to provide high cooling efficiency.It consists of an inner straight tube surrounded by an outer jacket tube,the cool water flows through the outer jacket from bottom to top to condensate the vapor in the inner tube. The fused-on narrower coolant jacket may render more efficient cooling with respect to coolant consumption..
  • WIDELY USED-----A west condenser can be both used in a reflux and a distillation apparatus .In the reflux apparatus, just as the graham condenser,Dimroth condenser,coiled condenser,liebig condenser does,it works with round bottom flask, drying tube,separatory funnel or additional funnel.In the distillation apparatus,it used to condense the vapr into liquid and drip to a receiving flask with a take-off adapter..
  • DIMONSIONS----It is designed with 24/40 standard taper joint at top and bottom,and two glass hose connections connecting the inner tube through which coolant flows,the lower hose used for coolant inlet,and the higher hose used for coolant outlet.With a jacket lenght of 190mm.
  • HIGH QUALITY---Laboy glass condensers are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.The ground joints are precisel....
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • Radiator pressure tester & coolant vacuum refill kit mainly includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1PC universal cone rubber adapter, fit nearly any type of radiator openings on vehicles at home and abroad, helping detect and determine whether the water tank is leaking and fill the coolant under vacuum. There are also 3PCS radiator cap adapters and 2PCS connectors checking the radiator caps for leaks..
  • Radiator pressure tester is composed of 3" pressure gauge(0-35 psi.
  • 0-2.5 bar), aluminum cylinder pump and 21" long rubber hose. Manual radiator leak tester features fast pressure relief function and quick disconnect for convenience. Use the hand gauge tester pump tool to pressurize the radiator / cap and observe whether the pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass....
Check Stock

QWORK Fan Clutch Wrench Set, 32mm Fan Clutch Nut Wrench, Water Pump Holder Removal Hub Holding Tool

  • 【Powerful Coolant Vacuum Refill Kit】 Perform vacuum pressure test and coolant vacuum filling service. Use an extra vacuum pump to work with this airlift coolant replenishment tool to create a vacuum in the cooling system, and then suck the coolant into the radiator. Quick replenishment system, no air pockets or hot spots are generated, to avoid distortion or other factors damaging the engine..
  • 【Convenient & Widely Applicable Coolant Vacuum Cleaning Kit】By generating a vacuum in the cooling system, the time for refilling new coolant is greatly shortened, and there is no need for time-consuming air bleeding. This coolant vacuum cleaning kit is widely used Used in various domestic and foreign automobiles, SUVs, trucks, etc..
  • 【Excellent durability & air tightness】 This coolant refill kit adopts a reliable metal structure to ensure durability and good air tightness, a reliable & durable tool set..
  • 【Complete Coolant kit】The cooler anti-leak kit includes a brass T-connector and universal taper plug, 4 adapters of different sizes (O.D. 35mm, 40mm, 45mm, 55mm), suitable for most types of vehicles. The adapter can be connected to the adapter on the air supply tool, and then the radiator cover sealing cooling system can be replaced to help radiator....
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • MULTIFUNCTION: JIFETOR all in one comprehensive coolant pressure tester fill kit includes leak detection, temperature measurement and coolant filling functions. Radiator pressure tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Coolant vacuum refill tool uses vacuum pump to extract air and form a vacuum to draw coolant into the cooling system. Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine..
  • WIDE USAGE: Cooling system pressure tester and coolant bleeder kit is equipped with 17 specific adapters and 1 universal tapered rubber adapter, suits for almost all types of radiator openings on classic and modern vehicles. Included 3 radiator cap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin ma....
Check Stock

OEMTOOLS 87045 No Spill Coolant Filling Funnel Kit with Coolant Tester, No Spill Coolant Funnel Kit, Coolant Tester Kit

  • Coolant Filling Kit: 5 direct fit radiator adapters, 4 caps, 2 45 degree elbows, 1 5 inch straight extension, 1 fluid stopper, 1 fluid tester, and 1 clear funnel.
  • Easy to Use: This spill free funnel kit makes coolant filling simple.
  • Select the correct adapter, attach the funnel, and fill.
  • Adapters fit most passenger vehicles and light trucks.
  • Don’t Get Stuck: The 45 degree angled elbows as well as the 5 inch straight extension in the coolant funnel kit allow you to access hard to reach areas.
  • Mess Free Coolant Refill: The fluid stopper prevents drips and spills when removing the funnel from the filler neck.
  • The adapter gaskets also prevent fluid leakage.
  • Test the Waters: The included coolant tester in this spill proof coolant filling kit quickly provides the freezing point of glycol-based coolants.
Check Stock