Best Coolant System Stop Leak

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • Radiator pressure tester & coolant vacuum refill kit mainly includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1PC universal cone rubber adapter, fit nearly any type of radiator openings on vehicles at home and abroad, helping detect and determine whether the water tank is leaking and fill the coolant under vacuum. There are also 3PCS radiator cap adapters and 2PCS connectors checking the radiator caps for leaks..
  • Radiator pressure tester is composed of 3" pressure gauge(0-35 psi.
  • 0-2.5 bar), aluminum cylinder pump and 21" long rubber hose. Manual radiator leak tester features fast pressure relief function and quick disconnect for convenience. Use the hand gauge tester pump tool to pressurize the radiator / cap and observe whether the pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass....
Check Stock

OEMTOOLS 24444 Coolant System Refiller Kit 5 Adapters Eliminate Trapped Air Test Radiator and Heating Core Lines for Leaks Vacuum Fill Coolant Tool Vacuum Leak Tester

  • Complete Coolant System Refiller: Refills the entire cooling system including the heater core.
  • Quickly eliminate the trapped air in your cooling system.
  • Huge Time Saver: Eliminate time-consuming bleeding and purging, and completely remove all trapped air from your cooling system after a radiator flush.
  • Discover Leaks: With this coolant pressure tester kit, check for leaks while under vacuum.
  • If your vacuum level decreases while all valves are off, you have a leak in your system.
  • Widely Useful: Radiator coolant vacuum refill kit comes with five adapters that fit most common radiator necks and coolant reservoirs.
  • Simple to Use: The included venturi valve turns any air compressor input into a strong vacuum force.
  • This is the easiest to use radiator fill kit you can find.
Check Stock

CMTOOL Radiator Pressure Tester Kit with Universal Rubber Adapter, Updated Coolant Pressure Tester Kit Coolant Vacuum Refill Kit, Automotive Cooling System Pressure Tester Kit with Carrying Case

  • 【Upgraded Multifunctional Cooling System Pressure Tester Kit】The radiator pressure tester kit includes everything you need to quickly and easily test vehicle radiator system leaks and refill coolant, improve vehicle service life, and keep your vehicle running smoothly. Thanks to its universal rubber adapter, the coolant pressure tester master kit is compatible with almost all domestic and imported vehicles on the market. So whether you are a DIY-er or a professional, this set has you covered..
  • 【Durable Radiator Pressure Tester with Good Airtightness】The radiator pressure tester uses high-quality aluminum pump cylinders instead of ordinary plastic pump cylinders, 21" rubber nylon resin hoses and brass fittings to ensure durability and good airtightness. The coolant leak detection kit can quickly find Whether there is abnormal leakage (About 10 minutes). The accurate shockproof meter (3 inches), the dial uses color code design to make the data clear and easy to read. (0-35psi/0-2.5bar).
  • 【Car Coolant Vacuum Refill Kit with 47.24-inch Transparent Hose】The transparent coolant filling hose is convenient for observing the supply status of the coolant, and the joint is equipped with a brass filter to avoid the inhalation of metal or other impuritie....
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak checker tool set is equipped with 3 specific aluminum adapters and 10 nylon adapters , solid and durable, widely compatible for Mercedes (W123, W126, W124, W201), GM(Buick), Jeep Peugeot, Subaru, Chrysler, Acura, GM(Nova, Spectrum, Sprint), Mitsubishi, Nissan, Mazda....
Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
Check Stock

JIFETOR Radiator Pressure Leakage Tester Tool Kit, 14PCS Automotive Cooling System Water Tank Leak Test Detector Set with Aluminum Hand Pump and Adapters

  • ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • WIDE USAGE: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible with Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on. All these adapters are color coded, number marked and placed exclusively, can be easily selected according to the marked number in instruction, convenient and no confusion. Check if the adapter caps are suitable when get the kit.
  • HAND PUMP LEAK DETECTOR: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and....
Check Stock

Robinair 75700 CoolTech Coolant Exchanger

  • 10 minute exchange process means no more waiting for the engine to warm up.
  • Engine off feature removes pulleys belts and fan blades from the safety equation.
  • Vacuum mode creates a push/pull exchange process allowing the technician to safely remove high pressure in a hot system.
  • Leak check feature allows the technician to test for leaks prior to refilling.
  • Two external new coolant supply tanks allow on-board storage of two different coolant types.
Check Stock

Super Stars 35Pcs Radiator Pressure Tester, Pneumatic Vacuum Coolant Refill Tool Automotive Kit, Test Cooling Systems for Leaks

  • Best tool to test any leaks in radiator, change coolant, quick refill the vehicle cooling system and remove air pockets. This 35pcs Coolant system leak checker and filling tool set is your must have kit..
  • The radiator pressure tester pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. Large pump capacity reduces strokes required to pressurize cooling systems, also prevents air pockets that can lead to hot spots in the cooling system..
  • Drastically reduces the time it takes to fill cooling system. Features include a thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..
  • 35 Pieces: include durable exact size of nylon testing caps, rust-proof copper connectors, clear gauge reading, high-quality rubber and metal adapters all included in one red molded case, easy to organize, use and carry. American & European styles air plugs are included for you to choose. Suitable for most domestic and import vehicles..
  • AVOID OVER PRESSURIZE THE RADIATOR. Ideal readings should range between 15-20PSI (1.03-1.37BAR). a) Gauge holds steady – If gauge hand holds at the same pressure number for 2 minutes, there are no serious leaks in the system. b) Gauge drops slowly – Indi....
Check Stock

Jet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard

  • DURABILITY: Blade drive reduction gearbox operates in an oil bath..
  • FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
  • BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check Stock