Best Construction Fastener

uxcell 3/32\ Hex Key Wrench, L Shaped Long Arm CR-V Repairing Tool 5 Pcs

[Size] - 3/32" hexagon head, 2.36" (60mm) total length..
[Durable Construction] - Heat treated chrome vanadium alloy steel drop forged body provides hardness, high torque and toughness. With nickel-plated finish for anti-rust and wear-resistant..
[Chamfered End] - Insert smoothly into the fastener head, reducing wear on the wrench and fastener head..
[Long Arm / Short Arm] - offers extended range on one end and extra leverage on the other..
[Widely Use] - To remove and install socket cap screws found in towel bar, door handle, assembling furniture, equipment, and more..

Check Stock

ACCO Pressboard Report Cover Side Bound Tyvek Reinforced Hinge 11 x 17 Inch Sheet Size 8.5 Inch Centers Black A7047071A 6 Pack

Durable 20 point pressboard PRESSTEX report cover. This pressboard report cover with fastener features hinges that are reinforced with tear-resistant Tyvek tape, providing extra durability where you need it most..
ACCO fastener secures thin or thick documents. ACCO Archival report covers keep your important documents safe and in great condition even in long term storage. This 11 x 17 Inch report cover is made of genuine 20 point.
Made from 50 percent recycled and 30 percent post-consumer material content The pressboard construction offers a durable, yet economical, protective cover to protect important documents..
Sturdy ACCO fastener secures thick or thin documents and allows the report cover to easily adjust to capacity - never too little or too much space means better storage space efficiency.
Top bound on the 11 Inch side with 17 Inch height includes color-matched durable Tyvek hinges for everyday use. you are looking for a quick and easy solution for report covers..

Check Stock

uxcell 6mm Hex Key Wrench, L Shaped Long Arm CR-V Repairing Tool 2 Pcs

[Size] - 6mm hexagon head, 3.35" (85mm) total length..
[Durable Construction] - Heat treated chrome vanadium alloy steel drop forged body provides hardness, high torque and toughness. With nickel-plated finish for anti-rust and wear-resistant..
[Chamfered End] - Insert smoothly into the fastener head, reducing wear on the wrench and fastener head..
[Long Arm / Short Arm] - offers extended range on one end and extra leverage on the other..
[Widely Use] - To remove and install socket cap screws found in towel bar, door handle, assembling furniture, equipment, and more..

Check Stock

uxcell 3mm Hex Key Wrench, L Shaped Long Arm CR-V Repairing Tool 5 Pcs

[Size] - 3mm hexagon head, 2.24" (57mm) total length..
[Durable Construction] - Heat treated chrome vanadium alloy steel drop forged body provides hardness, high torque and toughness. With nickel-plated finish for anti-rust and wear-resistant..
[Chamfered End] - Insert smoothly into the fastener head, reducing wear on the wrench and fastener head..
[Long Arm / Short Arm] - offers extended range on one end and extra leverage on the other..
[Widely Use] - To remove and install socket cap screws found in towel bar, door handle, assembling furniture, equipment, and more..

Check Stock

Rexka Rear Trunk Liner Push-Type Retainer for Mazda B467-68-AC3-02 CX-7 CX-9 Mazda 5 (Pack of 30)

Other Names:Console Assembly Screw, Door Trim Panel Fastener, Side Cover Fastener, Lower Trim Panel Fastener, Pkg Tray Trim Clip, Rear Panel Trim Fastener, Rear Pillar Trim Fastener, Side Panel Fastener, Side Trim Fastener, Trunk Side Trim Fastener, Upper Molding Fastener, Cowl Trim Fastener, Trunk Lid Trim Fastener, Quarter Pillar Trim Fastener, Rear Pillar Trim Clip, Trim Panel Assembly Fastener, Under Cover Fastener, Lower Center Pillar Trim Fastener, Trim Panel Assembly Clip, Fastener.
Head Diameter: 18mm Stem Length: 14mm Fits Into 6mm Hole.
Replaces Mazda: B46768AC302 Mazda 5, CX-7, CX-9, Miata, Millenia, MX-6, RX-7 & Protégé 1993 -.
Positions:Left Front, Left Lower, Left Rear, Left Upper, Right Front, Right Lower, Right Rear, Right Upper.

Check Stock

Concrete Nail Gun, Silencer Shot Nail Grab, Steel Nails Gun, Portable Nail Gun Set, Concrete Nailer With Case, Manual Fastening Tool for Cement Wall

✅ Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long | Hardened driver | Convenient side-load magazine | Rubber hand grip for added comfort | Heavy-duty light weight aluminum body | Adjustable exhaust.
✅ Soft grip handle reduces fatigue | Touch-strike security system is safe for the operator | Available with either sequential and contact fire trigger | Quick-release nosepiece for fast clearing of jams | Rubber can protect the surface of the gun when the gun fall.
✅ Magazine Capacity: 100 | Operating Pressure: 80-100 PSI | Air Inlet: 1/4" | Fastener Size: 14 Gauges - 0.087" Diameter | Fastener Type: T-Nails (both hardened & galvanized) | Fastener Length: 5/8" - 2-1/2" Long Nails.
✅ Includes: Concrete T-Nailer | Cardboard box.
✅ Wood to concrete & masonry furring | Plywood to concrete nailing | Light gauge steel drywall track to concrete | Wire lath to masonry | Steel banding to wood | Wood to light gauge steel (up to 3/16") | Decking | Fencing | Sub flooring | General construction.

Check Stock

Air Locker AL83V3 3-1/4 Inch Full Round Head Coil Framing Nailer

Side load pop-out magazine for fast and easy reloads | Cylinder valve drive system for rapid response and increased durability.
Tool-less depth or drive adjustment for flush fastening in varying materials | Open nose design for easy extraction of a jammed nail | Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use.
Specification: | Nail Capacity: 225-300 | Fastener Length: 2" - 3-1/4" | Fastener Diameter: 0.099" - 0.131" | Magazine Angle: 16° +/- 1° | Collation: Wire | Operating Pressure: 70-120 PSI | Firing Mode: Contact Actuation Trigger.
Applications: | Wall sheathing | Roof decking | Subflooring.
Mobile and modular home construction | Making of wooden boxes | Pallets and drums | Packing operations.

Check Stock

Freeman PE20VFN64 20 Volt Cordless 16-Gauge 2-1/2\ Straight Finish Nailer Kit with Lithium Ion Battery, Charger, Bag, and Nails (200 Count) – 1300 Shots per Charge, Orange and Black

Superior Performance: Drives up to 1300 fasteners per charge and 90 pieces per minute to increase productivity for construction contractors and DIYers.
Cordless Portability: Powered by high-capacity 20 volt 2.0 Ah lithium-ion battery featuring enhanced battery life, power level indicator, and 45 minute recharge time.
Construction Applications: Perfect for base moulding, crown moulding, furniture construction, chair rails, door and window casing, and cabinetry.
Compatible Nails: 16 gauge glue collated straight finish nails from 1" – 2-1/2".
Select Fire Button: Fast and easy to switch between single sequential firing for precision or bump firing for speed.
Tool-free Depth Adjust: Simply turn the depth adjustment wheel by hand to change the driving depth of nails for various projects and materials.
Quick Jam Release: Allows for easy access clearing in the event of a jammed fastener so you can get right back to work.
Textured Rubber Grip: Provides maximum comfort during long shifts and increases accuracy of fastener placement.
No Mar Safety Contact: Prevents damage to work surface and ensures professional results at home or at the jobsite.
Bright LED Light: Illuminates dimly lit work areas for increased visibility, and also warns of low battery.

Check Stock

beyond by BLACK+DECKER Adjustable Wrench Set, 6-Inch, 8-Inch & 10-Inch, 3-Pack (BDHT8159092APB)

EASY TO REACH TIGHT SPACES: Wrenches feature a tapered jaw design to help you work in hard to reach and tight spaces.
GRIP A VARIETY OF FASTENERS: Wide-capacity jaws to accept a wide range of fastener sizes.
EASILY ADJUST FOR A TIGHT GRIP: Easy-to-turn knurls adjust the wrench jaws to tightly grip a range of fastener sizes.
DURABLE, LONG-LASTING CONSTRUCTION: Matte chrome finish serves as a protective coating so you can rely on these wrenches for years to come.
INCLUDES: Set features 6 in., 8 in., and 10 in. adjustable wrenches to tackle a wide variety of tasks.

Check Stock