Best Connect Board

AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (OLED Board)

  • MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions).
  • AURSINC hotspot board supports Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model).
  • Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
  • If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat-12mhz.
  • Compatible with P4 settings:since our mmdvm board is defautly setup for Pi-Zero W, Pi 3. and if you do want to connect it with your Pi 4, you could try below methods. PICK ONE. Method 1: Remove the R1 resistance of the hotspot board(single/dual).
  • Method 2: Cut off the 2 Raspberry Pi pin headers on the corners of the board ( pick one to operate on your MMDVM board, refer to the product image for the R1 and 2 pin headers locations).
Check Stock

Toys Action Figures，8pcsToys Plastic Set Cake Topper Figurines for Kids Gifts Party Supplies(8Pcs)

  • RULE THE GRID 4 THE WIN: With this classic Connect 4 game, featuring a sleek modern style, players go head-to-head as they try to get 4 of the same color discs in a row to win.
  • EXCITING STRATEGY GAME: Challenge a friend to rule the grid! Strategy drives the competition in this Connect 4 board game. Line 'em up, block opponents, and be the first to get 4 in a row to win.
  • MODERN STYLE & COOL COLORS: The Connect 4 Classic Grid kids game takes the popular game one step further with a sleek style and cool colors to keep players glued to the grid.
  • 3 WAYS TO PLAY: Choose classic Connect 4 gameplay, the free-for-all Connect 4 Frenzy variation, or a third option that lets players drop a disc or eject one from the bottom with the pop-out feature.
  • EASY, FAST, AND FUN GAME FOR FAMILIES: Easy to learn and simple to set up, the Connect 4 Classic Grid family game for 2 players is a fast-playing favorite.
  • FUN GIFTS FOR GIRLS AND BOYS: Strategy Games are excellent gifts for families or gifts for kids that love playing classic board games.
Check Stock

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

  • The HEYTUR inflatable stand up board valve adapter will allow you to connect any standard electric pump, foot pump or compressor to the schrader valve fitting, the standard valve for car and bicycle tires..
  • It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
  • This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
  • Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
  • If you have any problems, please contact with us directly. Simply e-mail us the problem, the....
Check Stock

Connect 4 Spin Game, Features Spinning Connect 4 Grid, 2 Player Board Games for Family and Kids, Strategy , Ages 8 and Up

  • FAMILY BOARD GAME FOR KIDS AGES 8 AND UP: Get ready for suspense, strategy, and surprises. The Connect 4 Spin game is the first Connect 4 board game that features a spinning grid.Ideal for ages:8 years and up.
  • FUN STRATEGY GAME: Pop in a disc and then spin the column. Who knows how the discs will line up. Things can change in an instant while playing this strategic game of weights and balances.
  • 4 THE WIN: Strategy is the key but be prepared for surprising wins and swings in gameplay. The first player to connect 4 discs horizontally, vertically, or diagonally wins the game.
  • FEATURES 2 GAME MODES: Players can choose their challenge and play using rules for Beginner Mode or Expert Mode. One of the most exciting 2-player board games, makes a great choice for family gifts..
  • WEIGHTED DISC: Each color set of discs contains one disc with extra weight. Players can use it at anytime for a strategic advantage.
Check Stock

DAMGOO Bluetooth Amplifier Board, 100W+100W Peak Output Power, 2.0 Channel DC:8-24V, Password Free Connect, BT 5.0 AMP Board for DIY Wireless Speakers Board

  • Output Power: 100w+100w Output Power, Wide Voltage Input: 5V-24V, Can Be Powered by 9V/12V/15V/19V/24V. Adapter speaker 4-8Ω (50w-150w).
  • Bluetooth 5.0: User Can Directly Connect with Wireless Bluetooth 5.0 without Password.
  • Easy Installation and Short Start-up Sound: The Illustration Of Each Interface Is Printed On The Protective Plate, Making It Easy To Install Even Without Instructions. The Sound of The Amp Board To Start And Connect To Bluetooth Is Short Rather Than Not a Asian Woman's voice..
  • Protective Function:This BT Amp Is Designed with Protective Case, Over-heat Protection, Short-circuit Protection.
  • Note: Please Use A Power Adapter With Sufficient Power To Connect The Amp Board, Otherwise The Sound Will Be Distorted. And Make Sure The AMP Board Is Away From The Wifi Signal..
Check Stock

Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino

  • ...y handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)..
  • It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction..
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-befo....
Check Stock

479tk Fox Red Trainer Karambit, Model, 3.00" Blade Length, Blunt Edge, Liner Lock, Reversible Clip, Dull Version of Fox 470 G10, For Practice and Training, Made in Italy

  • Cab X2 High-quality, IR-loading stereo cabinet simulation pedal, Includes 14 user preset slots that can store two different cabinet simulation settings each.
  • The Cab X2 supports flexible stereo setups, allowing the option to bypass the cab sim pedal itself and connect to an external amplifier, sound board, PC, or pedal board. Two footswitch modes are also included and can be configured as a traditional on/off switch or to cycle through presets..
  • Designed to make management of all your presets and IR files simple, the Cab X2 editor software is free to download for MacOS/Windows and makes setting up your X2 fast and easy. Simply download the software, connect your X2 with the included USB cable, and tweak your cab simulation files to perfection..
  • Slience Pratice, while away from your PC, the Cab X....
Check Stock

WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire

  • ...dated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire..
  • 【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the board to various sensors and electronic components with the GPIO extension board..
  • 【40pin GPIO Rainbow Fat Cable】IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable.
  • Material: High-quantity copper soft wire material for safe and durable.
  • Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests..
  • 【830 Tie Points Solderless Breadboard】made of high quality ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling, with self-adhesive tape on back and multiple links to buckle..
  • 【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
  • 4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
  • these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit test....
Check Stock

LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller

  • 12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
  • Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
  • Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
  • Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
  • Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
Check Stock