Best Cone Twin Screw Extruder

200 Sets 9.5mm Cone Spikes Metal Tree Spikes Screwback Studs for DIY Leathercraft Decoration Punk Rock Style Clothing Accessories (Silver)

【You will receive】200sets metal cone spikes with screw. Size: 0.28inch x 0.39inch (7 x 9.5mm).
【High quality material】 These cone spikes are made of high quality alloy with nickel plated surface, clear grain, smooth and burr-free.screws not easy to slip during rotation, even force and good tightening strength..
【Easy to use】Coming with a hole puncher and screw driver, Just Need Punch a Hole and Screw on. Easy for you to install..
【Widely used】 These cone spikes are suitable for DIY various craft decoration, as a fixed or decorative items used. For example: belt, bag, clothing, key bag nails, Shoes, Dog Collarsetc..
【Note】When installing, the hole please do not exceed 3mm, if the hole is too large, it is easy to cause the screw to fall off..

All Metal Extruder Replacement for Ender 3 Ender 5 CR10 Series:This durable aluminum extruder frame works more stable than plastic parts..
Adjustable Extrusion Spring Tension Design: The extrusion spring tension could be adjusted by tighten the screw..
Upgraded Stiff Bed Leveling Springs:It provides stronger tension and longer sevice life than the stock ones..
High Quality Bowden Tube :It was made of highly purified PTFE(Poly Tetra Fluoro Ethylene) material,it feeds the filament smoothly..
Recommend filament materials:PLA/ABS/Wood/Hips/Flexible/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy..

【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..

Dual-drive Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385.
Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament.
Notification: Do not adjust tension of hand twist screw too tight when you print soft filament, otherwise the filament wiring will be winding on the wheel. Manually adjust to a suitable tension for your 3D printer.
Suitable for most 3D printers and filaments.
Packing with: 1x Bowden Extruder, 1 x Universal Stepper Motor Bracket.

Easily Accessible Magnetic Extruder: The removable magnetic carriage provides an easy launch point for changing to an extruder system of your choice.....
2 Screw Hotend Removal: Access to your hotend is easy, making quick changes to the tool head possible. Switch from a 0.4mm to a 0.6mm nozzle without....
Heated, Removable, & Flexible Print Bed: Capable of easily hitting 100 degree C, this large 300 x 300 print bed makes removing prints easier than....
Assisted Bed Level Sensor: Leveling is easy with the level sensor. It will detect differences in the bed, which allows you to set an accurate Z offset....
Dual Y Gantry: The dual Y gantry provides a stable base for the printbed, minimizing wobble found in single Y gantry models of 3D printers. This....

[Create Home-cooked Snacks]: Enjoy your own protein-filled beef jerky snacks with the 7Penn Ground Beef Jerky Maker Press Kit.
This 15-inch meat extruder beef jerky slicer works with ground beef, turkey, venison and more.
Make on-the-go meaty strips and snacks for hikes and camping trips.
[Easy to Use]: Squeeze the slide-release trigger on the back of the jerky blaster to set and load up to 1.5-pounds (24oz) of mixed ground meat and jerky seasoning into the beef jerky tube.
Attach nozzles, then squeeze the trigger to make beef jerky sticks or strips.
[Built to Last]: Jerky stick maker deer jerky extruder has a thick, durable plastic meat chamber and a stainless steel trigger mechanism and push rod that withstands repeated use.
A whole pound of ground meat can fit in the aluminum 15-inch (38.1cm) tube of this dehydrator jerky tool.
[Choose Between 3 Nozzles]: Cone nozzle allows you to create perfectly round 1/2-inch (1.3cm) beef sticks while the flat head nozzle allows you to make 3/4-inch wide by 1/4-inch thick (1.9 x 0.6 cm) strips.
Dual flat head nozzle creates 2 meat strips at once.
[Easy to Clean]: Place the removable tube and nozzle into the dishwasher to clean.
Wipe down the steel push bar and shooter handle with a de-sanitizer rag.

COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....

twin 11mm polyethylene terephthalate (pet) hard dome tweeter.
"4 x 6" carbon and mica reinforced injection molded polypropylene (impp) cone construction".
Included components: (2) Speakers, Manual.

Twin 11mm polyethylene terephthalate (pet) hard dome tweeter.
6 x 9" Carbon and mica reinforced injection molded polypropylene (IMPP) cone construction.
Included components: (2) Speakers, Manual.