Best Conduit Threadless Connector

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,，UL Listed, (6 PACK) (1/2-180D)

THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

Sold as 2 PCS: one taper is 18ga(1.0mm) thickness,another is 16ga(1.2mm),Length: 38mm (approx 1.5 inch). A thin pin at the end(no thread/no hole).Material: 6AL4VELI ASTM F-136 implant grade titanium ,Titanium has excellent biocompatibility and is half the weight of surgical steel..
Function:① Stretch hole for gauge modification purpose(from 20g to 18g/16g),Good piercing hole stretch/expander kit.Make your stretching journey safe and easily. ② Used for assisting in the placement of shaft/post. Put threadless piercing bar in the end of the pin, then push it though.Pin will come out of the hole and threadless piercing bar/post will be in. ③ Changing your nose piercing nostril stud much easier.Highly recommend to change threadless/press-fit into jewelry!.
Attention:① Our threadless insertion pin only fit our threadless piercing jewelry,others is unfit. ② Make sure to use some kind of vitamin e or mineral oil for lubricant while stretching. ③ If you had sensitive skin using this titanium insertion pin is very safe..

...ts to a standard water hose, via a male, standard water connection. The other end a highly flexible, silicone polymer sleeve stretches to fit over the end of virtually any standard water source. Simple and quick to install..
Works With Many Features: Connects to damaged or threadless faucets.
Improved expandable depth design to prevent leaks and blowing off from the faucet better.
Perfect for indoor and outdoor use (such as garden watering, car washing, pet cleaning, washing the floor and so on).
Quick and easy installation, this hose connector for RV can be easily slipped over a damaged faucet while the threaded end is attached to the hose..
Not intended for use under pressure. Keep the other end of your water hose open or the pressure will pop the hose adapter off the spigot..

Multi-quantity: there are 8 pieces cable connectors in the package, enough quantity to meet your replacement and using needs in daily work, better cooperate with you to finish work.
Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
Screw straps design: the 650XY2 clamp type connector has 2 pieces screw straps and flexible conduit FTGS.
It is the service entrance cable fittings but does not the metallic cable.
Cable size measures 14 awg, and the knockout is about 1/2 inches.
Size information: cable connector clamp is about 1/2 inches, before purchasing, pay attention to whether it meets your daily needs for work and cooperation, in order to prevent wrong purchase.

Material:Conduit hangers are made of zinc-plated iron,durable to use..
Conduit hanger ensure that the rigid conduit and EMT conduit are securely secured to the mounting surface..
High-quality and durable conduit hangers with bolt..
Used to secure and suspend EMT, rigid conduits from overhead supports..

A variety of quantities: there are 4 pieces 4 1/2-inch and 4 pieces 3/4-inch cable connectors in the package, enough to meet your replacement and use needs in daily work, and better cooperate with you to complete the work.
Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
Screw strap design: 650XY2 clip-on connector has 2 screw straps and flexible conduit FTGS.
It is a service entrance cable accessory, but not a metal cable.
The cable size is 14 awg, and the shooting distance is about 1/2 inch and 3/4 inch.
Size information: the cable connector clamp is about 1/2 inch and 3/4 inch, please pay attention to whether it meets your daily work and cooperation needs before buying to prevent wrong purchase.

【Material】The connector is made of high quality aluminum alloy, with corrosion resistance, and longer service life.
【Applicability】External thread pitch M12x1.25, adapter inner diameter: 13.9mm. Almost suitable for 12x1.25 pitch shift knobs, especially suitable for most shift knobs.
【Function】After installation, the shift knob shifter adapter can be changed from threadless to threaded.
【Features】Use a wrench to tighten the screws, and you can quickly install it in a few minutes.
【Service】All products are guaranteed for One year. If you have any questions, please contact our team.