Best Concrete Block Production

Agri-Fab 45-0365 Push Spike Aerator, Black

Expose grass to air, nutrients, and water.
Steel weight tray holds concrete block, creates pressure and pushes spikes into ground.

Sold 1 piece Concrete Molds (FOTO 2) Grass Concrete Paving Block.
Size 19.68 in x 19.68 in x 2.36 in (500x500x60 mm) Mold is reusable.
The mold is made of ABS plastic thickness of 0.078" (1.9-2 мм) Depending on the geometry of the product wall thickness can form less than the above dimensions..
Perfect for parking areas in residential and commercial developments, Grass Concrete Paving Block is a great choice if you need a paving product that truly complements its surroundings..
This concrete paver is perfect for area that require detailed water management and drainage, need to withstand heavy traffic and abuse. Grow grass in the voids or fill them with gravel to allow rainwater to permeate through and help with areas that suffer from excessive rain water runoff. These pavers are recommended for creating attractive and functional paths, patios, courtyards, driveways and to create off street parking areas.

The concrete wood mold in one for the manufacture of concrete tiles that mimic old wooden boards.
Size of concrete wood stamp mold - 11,75" x 11,75" x 1.2 "(30 x 30 x 3 cm)..
Concrete molds wood for paving slabs "Board" is intended for the production of paving slabs from concrete by vibratory casting. Concrete compaction is carried out on a vibrating table. This increases the strength and frost resistance of concrete..
Paver molds for concrete made from ABS plastic. Mold thickness 2 mm. Paver molds for concrete cobblestone can be used for casting plaster and concrete..
With stampcrete concrete molds can produce more than 50 tiles for arranging garden paths..

...ed design, built-in noise reduction, external sound insulation.
after the nail is fired, the sound comes out of the silencer hole and is absorbed by multiple silencers to achieve the ultimate silencer effect..
【Adjustable power:】 4 blocks of adjustable power. Can hit 1 cm thick steel plate.
can hit C20-C70 grade concrete. It contains five poles and has a total length of 3.4m.
it can be used for 5.5m high floor slabs..
【Automatic slag discharge:】 Comes with diversion groove, no need to disassemble and clean dust after finishing. After the integrated nail is excited, the shock wave discharges the residue from the muffler hole through the laminar flow groove and finally from the slag exhaust hole..
【Material:】 High-strength steel is used to prevent corrosion and wear. The high-quality military materials are only used for military special technologies to ensure 100% firing and life expectancy of more than 20,000 times..
【Scope of application:】 light steel keel, steel plate, concrete, wood, support installation, bridge, monitoring, anti-theft network, etc. 1 block is suitable for high-standard concrete.
2 block is suitable for ordinary cement board.
3 block is suitable for ordinary brick wall.
4 block is suitable for wooden soft base..

Works in rotary and SDS hammer mode, works forward and reverse.
Drilling a hole through concrete block takes less than 7 seconds.
Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.

MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.

TEXTURED LIKE CONCRETE: Blends easily with concrete and mortar.
SEALS CRACKS & JOINTS: Works on concrete, masonry, stone, cinder block and brick.
WON’T STAIN OR BLEED: Mimics the look of concrete or mortar.
EXCELLENT ADHESION: Provides a long lasting repair.
WATER CLEAN UP: Cleans up easily with soap and water.

MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.

Works in rotary and SDS hammer mode, works forward and reverse.
Drilling a hole through concrete block takes less than 7 seconds.
Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.