Best Concrete Anchor

Drive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000

Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
The washer on the anchor retains the pin and guides it during the driving installation..
Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
304 Stainless steel is durable and rust resistant.

CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.

Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

[Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
(2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
[Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
[Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
[Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
[Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
Wooden posts and installation screws not included.

Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....

PRO-STYLE LOOK AND PERFORMANCE - Clear View tempered glass backboard delivers pro-style look and rebound performance.
POWDER-COATED STEEL - Black anodized frame creates a professional, arena-style appearance.
MOVE YOUR HOOP WITH YOU - In-ground anchor system cured in concrete with the option to unbolt and move goal, includes anchor kit system.
INNOVATIVE STEEL POLE DESIGN - Uncompromising strength and stability supported by Three-Point Technology.
INCREASE STABILITY - Foundational strength of 1-piece main pole mounted to concrete anchor.

STRONG AND RELIABLE: Six 10-ton chains with solid steel anchor pots that anchor the car down to the ground ensuring safe frame and body repair..
QUICK AND EASY INSTALLATION: Installs in your existing concrete floor with a core drill or use our optional Floor Plates for new concrete installs..
REMOVABLE CHAIN: The included chain is easily detachable from the anchor pot so you don’t need to replace the pot if your chain breaks..
HASSLE-FREE REINSTALLATION: This floor anchor pot is easy to move and reinstall any number of times. This allows for expanding or rearranging your....
PREMIUM WORKMANSHIP: Made in USA of the highest quality materials. Solid steel pot construction with high quality 10-ton chain for long life and....

Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
Anchor has an internally threaded body made of zamac alloy.
Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
Ultimate tensile strength 420 lb. in 2,000-psi concrete.
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

【Marine Grade】Antsky wedge anchor bolts are made from high quality 316 STAINLESS STEEL, it's rust resistance, can last long in wet and humid environments；.
【Diameter】The OD of the anchor is 3/8'', the total length is 3-1/2" , the length of the threads on the anchor is 2"；.
【Black Painting】Our anchor's surface is electric painted into black colour, which is special made for longer working life and stylish looking；.
【Application】This anchor is designed to use in concrete、rocks etc. base material；.
【Note】The anchor requires a pre-drilled hole in the base material, which must be same size as the OD of the anchor, we suggest to use a 3/8'' drill bit..