Best Concrete Anchor Epoxy

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray (Fоur Расk, Gray)

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

J-B Weld 43032 UltraRez UV Resistant Resin, Epoxy Resin, Art Resin, Crystal Clear Non- Yellowing, 32 fl. Oz. Kit, Clear

  • ★ QUICK SET EPOXY: A 2-part epoxy resin system with accelerated drying properties. This fast set epoxy is ideal for anyone requiring a wood or concrete epoxy resin sealer with a shorter working time, drying time, and curing time.
  • ★ QUICK 2-3 HR EPOXY CURE: Considered the BEST 2-3 hour fast drying epoxy on the market. Apply to river tables, live edge wood slabs, epoxy countertops, and epoxy bar tops to prevent air bubbles.
  • ★ FILL CRACKS FAST: Pour epoxy into river table cracks and voids to quickly seal and fill. Use this quick drying resin as clear cast epoxy or excellent for colored cracks and veins in wood or concrete - 12-15 minute pot-life.
  • ★ COLOR CRACKS & VOIDS: Tint with epoxy resin mica powders, epoxy alcohol inks or liquid epoxy pigments to make beautiful epoxy accents to enhance a deep pour wood river table or countertop.
  • ★ MADE IN THE USA: We are the manufacturer and understand epoxy! Quick Set Seal epoxy has 100% Solids, Low Odor, Zero VOC, Quick Curing 1:1 Mix Ratio, 1 Quart 2 Part Epoxy Resin Kit.
Check Stock

Sleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Check Stock

Sleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

WiseBond Quick Set Seal 1-Quart Kit Epoxy Resin Seals Wood Slab Live Edges, Fills Cracks and Seals Tables and Countertop Surfaces to Prevent Air Bubbles, 1:1 Ration, Fast Cure Epoxy Resin

  • ★ QUICK SET EPOXY: A 2-part epoxy resin system with accelerated drying properties. This fast set epoxy is ideal for anyone requiring a wood or concrete epoxy resin sealer with a shorter working time, drying time, and curing time.
  • ★ QUICK 2-3 HR EPOXY CURE: Considered the BEST 2-3 hour fast drying epoxy on the market. Apply to river tables, live edge wood slabs, epoxy countertops, and epoxy bar tops to prevent air bubbles.
  • ★ FILL CRACKS FAST: Pour epoxy into river table cracks and voids to quickly seal and fill. Use this quick drying resin as clear cast epoxy or excellent for colored cracks and veins in wood or concrete - 12-15 minute pot-life.
  • ★ COLOR CRACKS & VOIDS: Tint with epoxy resin mica powders, epoxy alcohol inks or liquid epoxy pigments to make beautiful epoxy accents to enhance a deep pour wood river table or countertop.
  • ★ MADE IN THE USA: We are the manufacturer and understand epoxy! Quick Set Seal epoxy has 100% Solids, Low Odor, Zero VOC, Quick Curing 1:1 Mix Ratio, 1 Quart 2 Part Epoxy Resin Kit.
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

Loctite Epoxy Metal/Concrete, 0.85 fl oz, 1, Syringe

  • For Concrete and Metal Projects: Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity.
  • Fast and Professional: High-strength epoxy sets in just 5 to 12 minutes to a metallic grey finish to blend with metal and concrete.
  • Two-Part Adhesive: Convenient double syringe applicator dispenses equal parts epoxy resin and hardener for a tough, rigid, high-strength bond.
  • Resilient: Does not shrink and is resistant to humidity and water, most common solvents, and has high impact resistance and can be sanded, drilled, and painted.
  • Multi-Purpose: Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass or as a filler for gap filling, surface repairs and laminating.
Check Stock