Best Computer Cpu Cooling Fans

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
Plastic construction 9 blade fan. Dual Ball Bearing.
DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
small heat radiating communication equipment.
intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.

Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
Fans can spin at the same speed using software from a motherboard equipped with PWM control.
Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.

Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
Cool your Raspberry Pi 4 without fans and noise..
【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.

Check Stock

SoundOriginal NF- 4020 Brushless DC Cooling Fan 12V 0.04~0.06A 40x40x20mm Speed 5500 RPM Fans for Computer Case Network and Storage Equipment (Routers, Switches, NAS etc Replacement) (12V 1pack)

Computer fans 40mm Brushless cooling fan 12vdc 0.04~0.06A 40mm x 40mm x20mm Speed 6000 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
small heat radiating communication equipment.
intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
electronic cooling fans and so on—Repair Replacement (1Pack).
Bearing Type: Dual Ball Bearing, Speed: 5000 RPM, Dual-ball bearings have a lifespan of 60,000 hours and allows the fans to be laid flat or stand upright. Connector: 2 Terminal Connector with 2pin-ph2.5.
Connector: 2 Terminal Connector with 2pin-ph2.5.
compact motor design, the NF-A4x20’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x20’s superior airflow and pressure performance..
40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
Dimensions: 40x40x20mm (1.6 x 1.6 x 0.79inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.

Check Stock

StarTech.com 12in 4 Pin Fan Power Extension Cable - M/F - Fan power extension cable - 4 pin PWM (M) to 4 pin PWM (F) - FAN4EXT12

Extend the connection distance of a 4-pin cooling fan by 12 inches.
1ft Case Fan Extension Cable / 1ft 4-Pin Fan Cable / 1ft PWM Extension Cable / PWM Male to Female / 4 Pin Fan Extension Cable / 12in 4 Pin Fan Power Extension Cable M/F.
Extend the placement of a 4-pin computer fan by up to 12in.
Designed for CPU Fans with 4-pin connectors.
Offers greater flexibility to position Motherboard and CPU Fans for optimal cooling.

Check Stock

FBHDZVV 4 Pin PWM Fan Splitter Cable, Black Sleeved Case Fan Braided Adapter Cable 1 to 3 Converter Y Splitter for Computer PC CPU Cooling Fan ATX Case 4-Pin/3-Pin Extension Power Cable 10 Inches

The pwm fan splitter cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin male & one 4-pin male connector, 1-to-3 splitter fan power supply extension cables, male to female connector plug..
The black sleeved case fan braided adapter cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans, this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
Easily realize 4 pin PWM temperature control fan parallel connection, make full use of the limited number of motherboard 4 pin interface, can be extended to connect three 4 pin /3 pin fans, the fan splitter cable provide additional fan to increase airflow in your computer case..
4-pin PWM 1 to 3 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case. support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..

Check Stock

Antrader 4020 40x40x20mm 12V DC Brushless Radial Cooling Turbo Blower Fan for DIY 3D Printer Extruder Humidifier 3-Pack

40 x 40 x 20mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
High quality mini brushless 4020 DC 12V fan, sleeve-bearing design cooling cooler..
Plastic construction fan. Dual Ball Bearing.
DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A.
Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
small heat radiating communication equipment.
intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.

Check Stock

Scythe Ninja 5 120mm Air CPU Cooler, Intel LGA1151, AMD AM4, Dual Silent Fans, Black Top Cover

Tower cooler with 2 Kaze Flex 120 PWM fans at max speed of only 800 RPM, the push-pull configuration ensures cooling performance and efficiency at low noise level..
Cutout on the fin stack(55mm clearance) for better clearance of RAM, even in LGA2011(V3) / 2066 motherboards. Overall height is only 155mm, the cooler fits most tower PC case on the market..
H.P.M.S III is easy-to-install and secure for INTEL LGA 775, 1150/1151/1155/156, 1366, 2011(V3) Square ILM, 2066 & AMD AM4, AM3(+), AM2(+), FM2(+), FM1. This mounting system gives precise contact pressure to CPU and support most popular sockets..
Massive heatsink(130*X130mm) constructed with 6 x 6mm heatpipes and copper base to maximize heat transfer and dissipation from CPU, it is potentially be fanless solution as complete silent computer. Ideally to use for mainstream, gaming, overclocking computer with high TDP processor (9900k, 9700k, 9600k).
Product dimension: 137x155x182mm(W x H x D), Weight: 1190g. Included Y fan cable for installing both fans on same CPU fan header..

Check Stock

Rosewill ATX Mid Tower Gaming PC Computer Case, Tempered Glass, Supports 360mm GPU/360mm AIO Liquid Cooling, 4 x 120mm RGB LED Pre-Installed Case Fans with Remote Control - CULLINAN MX RGB

The Coolest RGB LED Effect for Gaming Computer: The RGB gaming pc case with tempered glass demostrates the extraordinary RGB LED lighting effect with a remote controller. It allows user to adjust the RGB effects as solid LED color and Pre-programmed color modes (Rainbow, Gradient, Blade and Breath.) to show off your case..
Tempered Glass Design to Show Gaming Desktop: The gaming case with tempered glass is surrounded with 3 sides of tempered glass to display your gaming computer desktop. ROSEWILL CULLINAN MX is a high quality tempered glass mid tower ATX computer case which is surrouned from the front and 2 sides. That makes ROSEWILL CULLINAN MX an elegant and misterous computer gaming case..
Optimized Ventilation & Generous Expansion: With 4x pre-installed fans, including three 120 mm blue LED case fans in the front and one 120mm fan at the rear offers excellent airflow makes it an outstanding ATX gaming case. Gamers are also allowed to install up to 170mm CPU Cooler and 360 mm Water-cooling Radiator in the front, 280 mm Liquid-cooling Radiator on top..
Quite Operation & Top-Mounted Multiple I/O Ports: With the 5mm tempered glasses all around and quiet operated fans, this gorgeous computer case aims to provide the quiest level of computer ....

Check Stock