Best Computer Cases Mini Itx

JGINYUE H97 Mini ITX Motherboard, White LGA 1150 Motherboard Support Intel i5 i7/Xeon E3 (DDR3/M.2 NVME/M.2/VGA DP HDMI-Compatible/PCIe X16/SATA 6Gb/s/2 Gigabit Ethernet)

LGA 1150 Mini ITX Motherboard: Equipped with LGA1150 CPU socket, supporting Intel i5/i7 and Xeon E3 series processors..
Three image transmission interfaces: This mini itx gaming motherboard supports VGA, DP, and HDMI-compatible high-definition high-performance graphics and audio signal display, you will have more choices in configuration..
Dual M.2 slots: The Intel motherboard with M.2 NVME protocol (support NGFF) slot, transmission power up to 32Gbps. Can support M.2 NGFF card.
DDR3 dual-channel memory: The LGA 1150 computer motherboard supports dual-channel Non-ECC Unbuffered DDR3, 1600/1333Mhz effective frequency. The maximum memory capacity is 16G..
Stable power supply: 4-phase power supply CPU stable power supply, all solid-state capacitor design, equipped with 24+8 pin power interface, to ensure the stable operation of the motherboard..

...th 1x Type-C Port, 1 x USB 3.0 Port, 2 x HD Audio, LED/Power Button. Our USB cable is shielded wire so that you can transmit data without interference..
[Tempered Glass Side Door] MUSETEX Y3 series micro-atx case has Tempered Glass opening door and Mesh Front Panel, making it easy and free to disassemble and install computer accessories. High-quality metal frames and clean cable management strips with dedicated routing allow you to build a durable and beautiful computer host..
[Addressable ARGB FANS] 2pcs 120mm ARGB fans are pre-installed to provide beautiful lighting and excellent airflow. The color of the fans can be controlled by the LED buttons on the I/O panel as well as by connecting the motherboard for software control..
[ Perfect Capacity ] Mesh PC case is effortless to install 3 x 2.5" SSD.
Motherboard Compatibility: Micro-ATX/ Mini-ITX.
[MUSETEX Y3 Series] Motherboard Compatibility: Micro-ATX and Mini-ITX. Not for ATX motherboard..

150 watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
The mini-itx power supply Short-circuit protection: output shut down when short-circuit,.
Pico power supply input connector: 2.5mm inner diameters, 5.5mm outer diameter.
The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector,pico psu with adapter.
Perfect DC PSU for mini ITX Motherboards.

ZZEW unique design: 13.9L capacity with size 13.79*6.42*10.05 inch, Mini ITX B6 is specially designed with front panel 3mm black tempered glass.
Support ITX motherboard 170*190*170mm, 2*2.5-inch HDD/1*3.5-inch hard disk, SFX power supply.
ITX Case body is full 3.0mm aluminum alloy with edage parts CNC polished hand working. B6 is big and with workmanship high-end among mini itx pc case series.
With USB 3.0 Type-C port design+Switch wire+power supply extension cord.
4-sided hollow mesh design makes a high efficent heat dissipation , support 5 fans in max with 240 liquid cooling.

You will get- A computer case with accessories including mute back fan*3, back panel*2, 8 hard disk stand, SATA data cable, various screws. ( Motherboard CPU and other accessories are not included ).
Support- Various ITX motherboards in the market: 17X17cm（6.7“*6.7“）.
ATX motherboards 24X24cm（9.6“*9.6“）.
DIY assembly of NAS servicer- The server assembles case not only good to meet the needs of computer hardware enthusiasts DIY, but also it will help you get a cost-effective server..
Ultra Silence – For powerful airflow out of the box, the case comes pre-equipped with 2 * 9025fan.
Mini Body- Miniature and elegant chassis, convenient placement, not occupy much space..

Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..

Size: extreme small size (9 x 7.4 x 3.5in ) design to fit in both Mini-ITX motherboard and Flex PSU (5.9 x 3.2 x 1.6in)..
Cooling system: abundant heat emission holes including front panel, are designed to solve common cooling problem of mini computer case..
Extension design: a slot of PCIE, two WIFI holes, and two USB 3.0 and HD audio..
CPU cooler: no taller than 75mm when install a M.2 hard disk.
no taller than 60mm when install a 2.5” SSD on top.
Portability: small volume (3.8L) allow it easy to be put in backpacks, luggage and on desktop..

Slim design only 15mm thickness(17mm with Anit-Vibration Rubber), this thin fan is ideal for SFF computer(HTPC, Mini-ITX case) or low profile CPU....
Newly designed blade and frame contribute high airflow with low noise, ideally for computer case, radiator/heatsink and CPU cooler. PWM control offers....
Using Sealed Precision FDB for long life span and quiet operation.Included antivibration rubber pads covering each corner of frame. These decouplers....
8 high quality LEDs built into central hub, the lighting is bright and even reflected with milky-white blade. The 4-pin 12V RGB connector allows fan....
Connector: 4-Pin, Dimension: 120x120x15mm(17mm with Anit-Vibration Rubber), Fan speed: 300±200~1800±10% RPM, Airflow: 8.28~50.79CFM, Noise:....