Best Computer Cables Adapters Printer

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
Leverage hardware raid performance with this SATA multi-lane cable.
Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
Supports up to 6Gbs data transfer rate per drive.
DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
Slim ribbon cables minimize airflow impact in a computer case.
Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
Woven mesh sheath covers half of the cable for easy routing.
P1 to P4 markers provide easy ID after installation.
Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....

Check Stock

UGREEN USB to Parallel Port USB to IEEE1284 CN36 Centronics Printer Cable Adapter 10FT

System Compatibility: This centronics parallel cable is compatible with win98SE /ME /2000 /XP /Vista / Win 7/8/10, Mac OS and Linux systems..
Port Compatibility: This usb to parallel port can connect your computer with a transmission function USB interface to an old printer with 36 pin parallel, and easily regain your old printer. Note: Please note that this is a 36pin printer cable..
Transmission Rate: This USB to IEEE 1284 CN36 printer adapter cable length is 10ft and supports data transfer speed up to 12Mbps..
Plug and play: No need to install the driver, you just need to connect this centronics 36-pin to your old printer to make printing easier..
Stable Signal Transmission: This usb parallel printer cable adopts pure copper core and aluminum-magnesium braided mesh shielding design, which can effectively reduce signal loss during transmission and avoid printing abnormalities or garbled codes due to short circuits caused by long cables..

Check Stock

CKL HDMI KVM 2 Port 4K 30Hz Dual Monitor Extended Display (CKL-922HUA)

〖2 Port Dual Monitor KVM Switch Extended Display〗 Control 2 computers or Laptops from one set of keyboard, mouse and 2 monitors for extended or duplicated display.
It requires each computer and laptop has 2 video output interfaces and support extended display..
〖Support Dual HDMI or HDMI + VGA / DVI / DisplayPort Computers & Laptops (Need Adapters)〗 Perfect for Dual HDMI PCs and Notebook. Also support HDMI / VGA / DVI / DP video output mixture devices but need reliable adapters (not included), Please be aware of this before purchasing..
〖Cross Support Multiple Platform and Devices, Plug and Play with No Driver Needed〗Fully compatible with Windows Linux, Mac and more.
〖 More Switching Modes than Other KVM Switch〗1. Mouse roller clicks.
〖Enjoy High Resolution with Built-in EDID〗Supports high resolution up to 4K@30Hz ((3840*2160@30Hz) and downwards with built-in auto EDID ..
〖With Extra USB 2. 0 port and Audio Support〗The extra 2.0 USB HUB port allows you to plug in one more USB device or keyboard and Mouse with special features.
with separate audio and microphone output..
〖Special Notes on Cables Included〗The Packag....

Check Stock

USA GEAR Portable Photo Printer Carrying Case - Compact Printer Messenger Bag Compatible with Canon SELPHY CP1300 / CP1200, HP Sprocket Studio, Epson PictureMate PM-400, Kodak Dock PD-450 (Red)

PROTECT YOUR COMPACT PHOTO PRINTER – A soft and scratch-resistant interior lining combined with a multi-compartment design will keep your wireless mobile printer safe during on-the-go photo printing.
ADJUSTABLE INTERIOR DIVIDERS – Two cushioned FlexWall sections can be configured for custom protection that can accommodate the printer, AC adapters, batteries, digital camera, ink, paper, and more.
2 ACCESSORY POCKETS – A pouch in the main compartment is perfect for ink cartridge cassettes or small paper sets, while the exterior zipper pocket can store flash drives, SD cards, and small cables.
DURABLE DESIGN – The S7 Pro features reinforced padded walls, RipStop Nylon exterior and a rugged weather-resistant wrap bottom so your printer can safely withstand a variety of different conditions.
HIGH QUALITY backed by the USA GEAR 3-Year Manufacturer's Warranty | Interior Dimensions: 11.5 in x 8.5 in x 4 in.

Check Stock

USB Charging Cables Compatible Nintendo Wii U Gamepad, AFUNTA 2 Pack USB Charger Cord Compatible WiiU, 10ft / 3m - White

APPLICABILITY: This USB charging cables is specially designed for Nintendo Wii U Gamepad..
HIGH CHARGING SPEED: It is made of great materials to make sure that it charges the device quickly, efficiently and the most important - safely..
COMPATIBLE WITH VARIOUS ADAPTERS: It can be used on car charger, phone charging adapters, tablet charging adapters, computer USB ports, Power bank, etc..
10 FEET LONG CABLE: The cable is 10ft/3m long, which long enough for you to charge and play at the same time..
GREAT REPLACEMENT: This charging cable is a good replacement of the original one. And also set of 2 pack gives your device a reserve in office, car or tours..

Check Stock

Silicon Power 64GB 2-Pack 3D NAND High Speed MicroSD Card with Adapter

OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. And it is turning more and more into a full-on 3D printer operating system.
Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways.
Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Supports create awesome timelapse recording of all your favorite 3D prints and so much more.

Check Stock

Printer Sharing Switch, Manual Switcher Adapter, 2 Computer Share 1 Printer Scanner USB Device Hub with 2 Pack Male Cables

2 Computer Share 1 USB Device Hub - 2 computers share 1 printer, cut down office equipment spending and save lots of space, improves work efficiency, saves the cost of use..
Driver-free&Plug And Play - Only simply press a button to switch a USB device between computers..
Wide Compatibility - This USB 2.0 Manual KVM Switcher only compatible operating systems including Windows XP/7/8 /10/Vista, MAC OS x10.1 till MAC OS 12.4. It doesn't match well with Windows 11,Mac OS 13 or above version.
Portable And Convenient - Switch works with any USB-enabled computer without drivers, so you could easy press button USB IN 1, USB IN 2 which computer you want to use..
USB sharing Hub Includes - 1 x USB 2.0 interface , 2 x USB Square interface, 2 x 1.5M USB Cables. For better data transfer, please keep the the USB Cables(connected to the input and output devices) Length less than 3M..

Check Stock

Safco Products Muv Adjustable Printer Stand 1881CY, Cherry Top/Black Frame, Swivel Wheels, Two Adjustable Shelves

CLASSIC APPEAL. Safco Muv Adjustable Printer Stand combines laminate and steel to create a long-lasting, hard-working office cart. Two middle shelves adjust to accommodate printer heights and the side panels hide computer cables and cords for a clean, uncluttered presentation..
STRONG STEEL ASSEMBLY. Manufactured with commercial-grade steel for exceptional strength and stability, this smooth-rolling three level cart can lasts for years of heavy use. The sturdy framework features a black powder coat finish to help resist chipping and scratching for a long lasting professional appearance..
TWO ADJUSTABLE SHELVES. Two 3⁄4" thick melamine laminate shelves adjust to fit your storage needs. Top shelf is fixed..
INTEGRATED CABLE MANAGEMENT. The decorative molded PVC side panels help conceal cords and cables for an uncluttered appearance..
PRODUCT DIMENSIONS. Overall product dimensions: 29 1/2"W x 20"D x 35"H..

Check Stock

Safco Products Muv Adjustable Printer Stand, Medium Oak, Swivel Wheels, Two Adjustable Shelves,Medium Oak/Black,1881MO

CLASSIC APPEAL. Safco Muv Adjustable Printer Stand combines laminate and steel to create a long-lasting, hard-working office cart. Two middle shelves adjust to accommodate printer heights and the side panels hide computer cables and cords for a clean, uncluttered presentation..
STRONG STEEL ASSEMBLY. Manufactured with commercial-grade steel for exceptional strength and stability, this smooth-rolling three level cart can lasts for years of heavy use. The sturdy framework features a black powder coat finish to help resist chipping and scratching for a long lasting professional appearance..
TWO ADJUSTABLE SHELVES. Two 3⁄4" thick melamine laminate shelves adjust to fit your storage needs. Top shelf is fixed..
INTEGRATED CABLE MANAGEMENT. The decorative molded PVC side panels help conceal cords and cables for an uncluttered appearance..
PRODUCT DIMENSIONS. Overall product dimensions: 29 1/2"W x 20"D x 35"H..

Check Stock