Best Compressor Tank Drain Valve

Husky 12 Volt Inflator with Pressure Gauge to130-psi

165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered @ 90 PSI pump, enable long tool run time with quick recovery for the portable air compressor.
High efficiency motor of the electric air compressor is made for easy start up in cold weather or extension cord application. [14 ga or larger, 50 ft. (15.2 m) or less].
78.5 dBA noise level of the 6 gallon air compressor is made for a quiet work environment.
High flow regulator and couplers of DEWALT portable air compressor are designed to maximize air tool performance.
Long life oil free pump for maintenance free operation.
Console cover protects controls and is removable to allow easy repair.
Outlet tube rerouted to avoid being catch point.
30 lb weight makes unit easy to carry/store.
2 universal couplers to easily support two users.
Ball drain valve for quick & thorough tank draining.

2.0 SCFM @ 90 psi of the portable air compressor allows for quick compressor recovery time, per ISO1217.
1.5 gallon tank in shroud of the electric air compressor is easy to carry, includes water drain valve and rubber feet.
150 psi max tank pressure of the PORTER-CABLE air compressor stores more air in the tank for longer tool runtimes.
Durable oil-free pump for long life and no maintenance.
Low Amp 120V motor starts easily in cold weather or with extension cord.
Low Noise at 79 dBA (Tested per ISO3744) for a quieter work environment.
Fully enclosed design provides protection from hot or moving parts.
25' coil hose and 8 pc accessory kit facilitate a number of inflation tasks.

Efficient Performance: 10 gallon ultra large tank and 175 psi max tank pressure stores more air in the tank for longer tool run times.
Powerful Motor & Pump: 120V/60Hz, 15A,1.8 HP, UMC motor, 4 SCFM at 90 psi, 5.0 SCFM at 40 psi allows for quick compressor recovery time, it is enough to make it easily drive a variety of industry and household equipment.
Sturdy & Durable & Portable: The 10 gallon air compressor is made by high quality Q235B steel, oil-free pump for long lifetime and no maintenance. 2 big rubber wheels with hand carry, easy to move. noise level 80 dBA noise level for operational work environment.
Multifunction: This air compressor is designed for garage, jobsite and workshop, etc. Perfect used for inflating, cleaning, stapler pinner, brad/finishing nailer, roofing nailer, wrench, drill, paint sprayer, caulk gun, chisel and other tools.
What you get: 1 x 6 feet cord, 1 x ball drain valve, 1 x plastic filter, 1 x quick coupler, 2 x rubber wheels, 1 x user's manual, 1 year limited warranty.

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.

Powermate tank drain valve creates a snug fit to prevent unwanted air or water seepage.
Drain compressor regularly for optimal performance.

150 psi max tank pressure stores more air in the tank for longer tool run times.
2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217.
Six-gallon pancake-style tank for stability, includes water drain valve and rubber feet.
Low-amp 120-volt motor starts easily in cold weather or with extension cord.
Durable oil-free pump for long life and no maintenance.

Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI.
Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, 2.5 gallon air tank, relay, air tank....
200 PSI maximum working pressure, 1.76 CFM at 0 PSI.
Can inflate a 37 Inch Tire from 0-30PSI in 7 minutes and 10 seconds..
One Year Manufacturer's defect warranty through manufacturer with receipt. Air tank should be used with a drain cock and pressure release valve..

Typical Application:Instrumentation, hydraulic and pneumatic systems.
Powermate tank Drain valve creates a snug fit to prevent unwanted air or water seepage Drain compressor regularly for optimal performance..
Size:3/8" NPT Male Brass body and steel handle..
Working Pressure Range :Maximum up to 150PSI..

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.