Best Compressor Oil Level Sensor

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
One-year warranty for non-human factor damage and free lifetime technical support..

150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pump, enable long tool run time with quick recovery for the air compressor combo kit.
Nail gun and compressor kit features long-life oil-free, maintenance-free pump for convenient use.
BOSTITCH high efficiency motor of the air compressor nail gun combo is made for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less].
78.5 dBA** operational noise level for a quiet work environment.
SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8-inch to 2-inch.
1/4-inch x 15' PVC air hose with fittings included.

OIL-FREE: Requires no daily maintenance and eliminates risk of oil stains on work surfaces..
LIGHTWEIGHT: 29 lb. weight and narrow tank diameter make unit easy to carry/store..
HIGH FLOW REGULATOR AND DUAL COUPLERS: Maximizes air tool performance.
LOW NOISE LEVEL: 80dBA** operational noise level for a quiet work environment (**tested per ISO 3744).
KIT INCLUDES: BTFP02012 Pancake Compressor, 50' Rubber/PVC Blend Air Hose, 10 Piece Inflation and Blow Gun Accessory Kit..
Air Consumption at 40 PSI (SCFM): Air Consumption at 90 PSI (SCFM).

Efficient Performance: 10 gallon ultra large tank and 175 psi max tank pressure stores more air in the tank for longer tool run times.
Powerful Motor & Pump: 120V/60Hz, 15A,1.8 HP, UMC motor, 4 SCFM at 90 psi, 5.0 SCFM at 40 psi allows for quick compressor recovery time, it is enough to make it easily drive a variety of industry and household equipment.
Sturdy & Durable & Portable: The 10 gallon air compressor is made by high quality Q235B steel, oil-free pump for long lifetime and no maintenance. 2 big rubber wheels with hand carry, easy to move. noise level 80 dBA noise level for operational work environment.
Multifunction: This air compressor is designed for garage, jobsite and workshop, etc. Perfect used for inflating, cleaning, stapler pinner, brad/finishing nailer, roofing nailer, wrench, drill, paint sprayer, caulk gun, chisel and other tools.
What you get: 1 x 6 feet cord, 1 x ball drain valve, 1 x plastic filter, 1 x quick coupler, 2 x rubber wheels, 1 x user's manual, 1 year limited warranty.

【High-quality material】Air Conditioning Compressor Shaft Seal Kit,It is made of high-quality rubber and metal, which has the advantages of anti-aging, oil resistance, corrosion resistance, etc., and has a long duration of use and is not easy to damage..
【Direct Replacement】A/C Compressor Shaft Seal,This seal kit allows you to directly repair the original seals on some vehicle applications, and provides accessory assistance for the daily maintenance and updates of the vehicle, with high adaptability..
【Standard Specifications】A/C Compressor Shaft Seal Kit,Manufactured in accordance with standard specifications, strictly in accordance with the factory quality control, and its performance is stable after multiple tests after installation..
【Easy installation】Automotive A/C Compressor Oil Seal,The accessory installation method is simple, disassemble the original worn-out parts and re-install it, no complicated operation is required, and it is easy to use..

Comes complete with Wheel Kit & Air Filter | No hose included | Consider you will need a ¼” Universal / Industrial Male Quick Connector to attach your hose to the air compressor.
Product dimensions – 26" L x 14" W x 23” H | Max Pressure – 120 PSI | Voltage – 110V / 60 Hz | Min running watts – 2500 | Noise level – 60 dBA | Max Continuous run time – 30-60 min (depending on PSI & CFM) | Low Amp Draw – 8.5 Amps.
Oil-Free Pump for Less Maintenance & Costs | Powerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor.
The large 8.0 Gallon Steel Air Tank is Lightweight (48 lbs) and the wheel kit makes it very easy to transport.
The Oil-Free pump allows for use in a variety of temperatures and uneven terrains | This air compressor is ideal for anyone working inside where noise is a major issue.

Comes complete with Wheel Kit & Air Filter | No hose included | Consider you will need a ¼" Universal / Industrial Male Quick Connector to attach your hose to the air compressor.
Product dimensions – 26" L x 14" W x 23" H | Max Pressure – 120 PSI | Voltage – 110V / 60 Hz | Min running watts – 2500 | Noise level – 60 dBA | Max Continuous run time – 30-60 min (depending on PSI & CFM) | Low Amp Draw – 8.5 Amps.
Oil-Free Pump for Less Maintenance & Costs | Powerful 1.0 HP (Rated / Running) 2.0 HP (Peak) Motor.
The large 8.0 Gallon Steel Air Tank is Lightweight (37.2 lbs) and the wheel kit makes it very easy to transport.
The Oil-Free pump allows for use in a variety of temperatures and uneven terrains | This air compressor is ideal for anyone working inside where noise is a major issue.

150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered at 90 PSI pump, enable long tool run time with quick recovery for the air compressor combo....
Compressor features long-life oil-free, maintenance-free pump for convenient use.
BOSTITCH high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less].
78.5 dBA operational noise level for a quiet work environment.
SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8-inch to 2-inch.

【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), 240-33 ohms Fuel Level Sender & Installation Instructions . Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions..