Best Compression Driver

Pyle PDS772 2.84-Inch Titanium Horn Driver 8 Ohm 13/8-Inch x 18 TPI

300 Watts RMS / 600 Watts Peak Power Handling - 50 oz. Magnet Structure.
Midrange / Tweeter Compression Driver - 2.84'' (72.2mm) Flat Aluminum Voice Coil - Titanium Diaphram.
Sensitivity (1w/1m): 107dB SPL - Frequency Response: 500Hz ~ 18kHz.
Midrange/Tweeter Compression Horn Driver.
Titanium Diaphragm, 2 Flat Aluminum Voice Coil.

600 WATT POWER: This high powered audio projection midrange/tweeter system has a maximum power output of 600-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
1.5kHz-18kHz FREQUENCY RESPONSE: The car tweeter compression driver has a frequency response of 1.5kHz ~ 18kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction. Fits horns w/ 1 3/8" x 18 TPI threads.
8 OHM IMPEDANCE: This car tweeter has 2" flat aluminum voice coil, 102dB @ 1W/ 1M, & 8ohm impedance rating that compensates the undersized wire found in most cars. Reduces distortion so you can enjoy crisp & clear sound.
2” TITANIUM DIAPHRAGM: PylePro follows the standard size for most car stereo systems & created this midrange/tweeter compression horn driver with 2-inch titanium diaphragm. This high power tweeter compression horn will get you higher than high.
60 OZ MAGNET STRUCTURE: These tweeters have a 60 oz magnet structure. The heavy-duty housing provides a strong foundation & is easy to install to your car's sound system. Provides crispest, most accurate highs possible w/ modern speaker technology.
Midrange/Tweeter compression horn driver.

6-INCH COMPRESSION DRIVER: High-output compression driver kit that delivers a crisp, clear sound while balancing out bass-heavy car audio systems.
HEAR EVERY NOTE: Hear every beat, word, or bass line with a sensitivity of 110db and an impedance of 8 ohms.
NO SEPERATE FREQUENCY DRIVERS: Powerful ferrite motor and titanium diaphragm can handle concert-level sound at midrange and high frequencies with a response of 1,000 to 20,000 Hz.
QUALITY OUTPUT: Non-resonant cast aluminum horn controls dispersion for high efficiency right where you want it.
DURABLE MATERIALS: Heavy-duty, durable aluminum horn, 2-inch Kapton voice coil, and 33-ounce magnet keep pumping out sound for years to come.

... RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres. : JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil.
JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles.
18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1w/1m) : 99 dB SPL. Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50.
Crossover Frequency : 2.2 kHz Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.....

All-Over Canadian Flag Imprint | Bright colors provide enhanced visibility for long distance in air or ground light conditions.
85 compression: Low Compression reduces spin for increased distance.
Longer flight distance in achieved with a soft outer layer and a hard inner core | Driver: Low Spin / 8-Iron: Medium Spin.
Translucent two-piece Surlyn coating | New Soft N2 Rubber Core elevates short game control with a soft touch feel and low compression control.
Dimple Design 336 Circular Pattern | Weight: 45gm / Diameter: 42.6mm | Conforms to USGA and R&A Standards.

Sold As Each, Compression Driver not Included.
The Massive Audio F4 Aluminum 2" Bolt-On On Bi-Radial Horn boats excellent off-axis consistency for smooth and clear high frequency reproduction. The F4 flare works in conjunction with Massive Audio PAT SERIES compression drivers for perfect dispersion of high frequencies.
45 x 45 dispersion, 165mm x 156mm x 131mm, 2" Bolt-On, Ideal for Sound reproduction in small, medium and large-size environments..
Optimized to increase directivity which raises max SPL..
Heavy Duty Aluminum Material, Improve loading of the driver which magnifies efficiency.

Features: JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon....
High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF....
Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power....
Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50. Crossover....
High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBI M115-8A.....

Compact, lightweight Class D 2-way active loudspeakers.
8-inch extended range low frequency driver, 1 3/8-inch (35mm) pole mount receptacle.
1-inch (25mm) compression driver with 1-inch exit.
200 watts of output power, Additional Line output allows linking of multiple speakers.
Mic/Line input with Volume control and Clip LED, Floor monitor positioning options.