Best Compressed Air Line Dryer

1/2 NPT HEAVY DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

...ated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 5oz Metal Bowl With Visible Sight Glass..
STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Metal Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads..

Brand new 3/4" NPT compressed air moisture filter desiccant dryer unit. Also included is two refills of desiccant beads..
his filter / desiccant dryer removes water, oil and humidity from compressed air. The desiccant bead dryer will remove water and humidity in the compressed air..
These desiccant beads change color from blue to a light pink when they are saturated and need to be changed. This has a heavy duty aluminum quick release bowl for easy maintenance that provides easy viewing for contents as well as impact protection..
More replacement desiccant beads are available in our (Regulators, Filters & Oilers) ebay store category..
Great for painting, plasma cutters, sandblasting and more!.

1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..

1:" Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator Trap Combo Inlet / Outlet: 1"" Female NPT (measures about 1" diameter) This is a directional flow unit that comes which markings showing how to install. 3 Stage Compressed Air Filtration 5 Micron (Removes Water Droplets / Debris) .01 Micron Oilesser (Removes Finer Droplets / Oil Droplets / Oil Aerosol) Desiccant Dryer (Removes Any Remaining Moisture / Vapor).
1ST STAGE OF PRE-FILTER WITH 5UM FILTER ELEMENT TO REMOVE OIL, WATER & PARTICLES.
2ND STAGE OF MICRO-FILTER WITH 0.01UM FILTER ELEMENT TO REMOVE 99.99% PARTICLES AND OIL..
3RD STAGE OF DRYER WITH DESICCANT TO ABSORB THE LEFT WATER..

Amflo compact desiccant dryers have been engineered to deliver extremely dry compressed air to protect pneumatically operated equipment from the adverse affects of moisture.
A regular filter and an oil removal filter should be used as a prefiltering system immediately ahead of the desiccant dryer - a regular filter may be required after the dryer to remove desiccant dust.
Features an aluminum main body, metal bowl with sight glass, 70 Micron porous polypropylene internal inlet filter, 40 Micron sintered bronze internal outlet filter, 300 psi Max pressure.
1/2 inch port size, 1 qt capacity Steel bowl is rated at 250 psi at 120 degrees F.
for compressed air systems only - not for use with fluids.
When desiccant bead has changed Color from dark Blue to Pink the entire desiccant must be replaced or regenerated by placing it in a drying oven at 275 degree F until it turns dark Blue again.

Dew point suppression of 20⁰ F below compressed air temperature.
No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
Includes model D8 dryer vessel, model F200-55-1/2-B-MD-PD6 after-filter, one 50 lb pail of Dry-O-Lite desiccant, mounting bracket, and manual ball valve for draining.
Dryer vessel is constructed and stamped per the ASME Code.
Best for spray paint equipment, media blasting, and air tools.

NEW 20-25 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED AIR PRESSURE REGULATOR/WATER SEPARATOR FILTER + OIL REMOVING COALESCING FILTER.
THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
DRYER: 20 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
STAGE 1: AIR PRESSURE REGULATOR ADJUSTS 7-175 PSI / WATER SEPARATOR FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.

New 1/2″ Particulate Filter / Water Trap Compressed Air Line Coalescing Filter and desiccant dryer.
Wall mounting bracket included. 150 Max pressure.
1/2″ FEMALE NPT INLET X 1/2″ FEMALE NPT OUTLET.
THREE Stage unit has added water seperator pre filter to remove larger debris and moisture.

Dew point suppression of 20⁰ F below compressed air temperature.
No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
Includes model D12 dryer vessel, model F200-100-1/2-B-MD-PD6 after-filter, three 50 lb pails of Dry-O-Lite desiccant, and a manual ball valve for draining.
Dryer vessel is constructed and stamped per the ASME Code.
Best for spray paint equipment, media blasting, and air tools.