Best Comprehensive Sensing Distance

ChunHee Wireless Driveway Alarm System, 1/2 Mile Long Range Waterproof Motion Sensor Solar Security Alert System with Remote Outdoor (2 Sensors + 1 Receiver)

...rimeter alarm + wireless doorbell alert ③24 hours - Sensor no flash and no alarm + wireless doorbell alert ④At night 12hours - Sensor no flash and no alarm + wireless doorbell alert. Working modes can switch by remote control or power button..
▶【Long Range Sensing Receiving】: Through detection, the sensing distance of the driveway sensor is about 5-8m (16.4~26.25 feet),The horizontal sensing angle is 70°.The longitudinal sensing angle is 30°.The remote control and receiver distance is about 975 feet in open area.The angle of the solar alarm can be adjusted arbitrarily..
▶【Adjustable Alarm System】: A remote control can be paired with multiple solar-powered lane sensor alarms. In addition, a wireless receiver doorbell can also be matched with multiple solar-powered wireless lane alarms. You can choose a different melody to distinguish each alarm detection Device. Large-scale protective net system to ensure the safety of your premises..
▶【Easy Installation & Weatherproof 】: The solar wireless alarm adopts IP65 waterproof and screw installation. It can be installed outdoors or indoors with plenty of sunlight. Suitable for all-weather outdoor. Adaptation temperature: 14℉~122℉. Just plug the receiver into the socket at home..

[Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm；Total Size: 27mm x 28mm x 7.5mm / 1.06" x 1.1" x 0.3"(L*W*H).
[Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
when the magnet separates, the circuit is not conductive ( light off )..
[Widely Usedl] - This Door Contact Sensor works with any access control or burglar alarm system available.
[Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.

[Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm；Total Size: 27mm x 28mm x 7.5mm / 1.06" x 1.1" x 0.3"(L*W*H).
[Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
when the magnet separates, the circuit is not conductive ( light off )..
[Widely Usedl] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
[Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.

[Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm；Total Size: 27mm x 28mm x 7.5mm / 1.06" x 1.1" x 0.3"(L*W*H).
[Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
when the magnet separates, the circuit is not conductive ( light off )..
[Widely Usedl] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
[Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.

Total Size: 50mm x 14mm x 14mm / 1.97" x 0.54" x 0.54"(L*W*H).
[Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
when the magnet separates, the circuit is not conductive ( light off )..
[Widely Used] - This Door Contact Sensor works with any access control or burglar alarm system available.
[Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.

[Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm.
Total Size: 27mm x 14mm x 7.5mm / 1.06" x 0.55" x 0.3"(L*W*H).
[Normally Open] - NO means Normally Open: when the magnet separates, the circuit is conductive( light on ).
When the magnet together, the circuit is not conductive ( light off )..
[Widely Used] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
[Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.

[Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm.
Total Size: 27mm x 14mm x 7.5mm / 1.06" x 0.55" x 0.3"(L*W*H).
[Normally Open] - NO means Normally Open: when the magnet separates, the circuit is conductive( light on ).
When the magnet together, the circuit is not conductive ( light off )..
[Widely Used] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
[Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.

[Dimension] - Cable Length:250 mm；Sensing Distance: 15-25 mm.
Total Size: 27mm x 14mm x 7.5mm / 1.06" x 0.55" x 0.3"(L*W*H).
[Normally Open] - NO means Normally Open: when the magnet separates, the circuit is conductive( light on ).
When the magnet together, the circuit is not conductive ( light off )..
[Widely Used] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
[Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.

[Dimension] - Cable Length:250 mm；Sensing Distance:15-25 mm；Total Size: 32mm x 11mm/1.26" x 0.43" (L*D).
[Normally Closed] - N.C. means Normally Closed: When the magnet together, the circuit is conductive( light on ).
when the magnet separates, the circuit is not conductive ( light off )..
[Widely Usedl] - This Recessed Door Contact Sensor works with any access control or burglar alarm system available.
[Note] - the Magnetic Door Switch must be installed according to the sensing distance. It can only provide a switch signal to the transmitter. It cannot directly load the power, nor directly connect the lamp!.