Best Communication Module

Honeywell YTH6320R1001 Redlink Wireless Focuspro Thermostat Kit, 2 Packs

EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.

EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.

Communication: standard IIC communication protocol.
✹✹This sensor module is a small, 3 a-xis accelerometer and 3 ax-is gyroscope integrated in a single package..
✹✹The BMI160 is a small, low-power, low-noise 16-bit inertial measurement unit designed for use in mobile applications such as augmented reality or inland navigation, which require high-precision, real-time sensor data..
✹✹In full operation mode, with both the accelerometer and gyroscope enabled, allowing always-on applications in battery-powered devices..
✹✹3PCS 6DOF Bosch GY-BMI160 Module 6-axis Acceleration Gyro Gravity Sensor for Arduino.

Basic information: module model: GY-9250.
Power supply: 3-5V (internal low dropout voltage regulator).
Communication: standard IIC communication protocol.
Internal structure: this module uses the MPU-9250, and combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer which are integrated into a single QFN package.
Reliable chip: the MPU-9250 integrates a 3-axis magnetometer AK8963, which features smaller size compared to previous generation and sensitivity improvement with 0.15 μT/ LSB.
The 16-bit AD converter is embedded in the chip, with 16-bit data output.
Quality process: the 9-axis sensor module features the immersion gold PCB, which uses the machine welding process to make it work fine.
Applications: DTV and set-top boxes are applied to internet connection.
Wearable sensors are applied to fitness equipment and sports.

Kit Includes LYNX Touch 5210 Control Panel with Transformer and Battery Backup (3) 5815 Slim Door/Window Transmitters, (1) 5834-4 Four-button Wireless Keyfob & (1) 5800PIR-RES Wireless Motion Detector.
Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module (Included) for up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks - Jammed locks reported to Honeywell Total Connect Remote Services 40 devices (lights, switches and lamp modules) 20 scenes 20 rules (event-based actions) 20 schedules (time-based actions) Sunrise/sunset lighting control Randomized lighting control.
Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module (Included) for L5210 IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices. Internet Central Station Communication with L5100-WIFI or ILP5 Module.
Control Panel Dimensions (approx) 6.1" H x 8.5" W x 1.71" D (15.5cm H x 21.6cm W x 4.4cm D).
**PAID MONTHLY SERVICE REQUIRED FOR HONEYWELL'S TOTAL CONNECT REMOTE SERVICES**.

Equipment Interface Module (Eim): All Hvac Equipment Is Wired To The Module. Module Receives Communication From The Wireless Devices.
Return Air Sensor: Works With The Equipment Interface Module To Maintain Safe Indoor Temperatures If Power Is Lost At The Wireless Thermostat. Maintains 62 F For Heating And 82 F For Cooling.
Red Link Wireless Technology: Powered By Red Link Reliability. No Interference With Other Wireless Devices In The Home.

The AT-09 is a module that contains a BLE chip (CC2541)..
This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with for iPhone/iPAD, IOS 6 or Android 4.3 above devices..
This module allows to perform serial communication with the BLE chip thanks to an Rx and a Tx pin..
When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
The module is also very similar to the HM-10 module and is also compatible with it so if you have some experience with the latter, you will get started quickly with the AT-09..

VXDIAG SVCI J2534 can compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can....
High speed host communication and Stable host communication. (with RTS/CTS flow control).Host communication is high-speed and stable, keeping the....
[Switch on the Interface] There is a switch button on the interface. Please do press the switch button for the Module you want enter in. Pressed:....
VXDIAG SVCI J2534 is compatible with Ford / Mazda IDS,Only need to do two steps to Installs software. First,Install FVDI J2534 start software,then....
For software installation, please feel free to contact our online customer service..

WIRELESS FOCUSPRO THERMOSTAT: Same great features of the FocusPRO thermostat – now wireless. Installs in minutes. Displays outdoor temperature and humidity. 2 month low battery warning. Dual Fuel enabled..
EQUIPMENT INTERFACE MODULE (EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices..
RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling..
REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home..