Best Commander V2 0

Geekworm X857 V2.0/X862 V2.0 Matching Metal Case X857-C3 + Power Switch + Cooling Fan Compatible with Raspberry Pi 4 Model B & X857 V2.0/X862 V2.0& X735/X708 Not Support X873

  • New version X857-C3 metal case with power control switch and super mute 4010 cooling fan for Raspberry Pi 4 Model B & X857 V2.0/X862 V2.0& X735(ASIN:....
  • X857-C3 case DO Not support X857 V1.2 / X862 V1.0 / X872 V1.1 and X873 V1.2(Produced after May 2021).
  • 【User Manual】Refer to Geekworm WiKi search....
  • Supports X735 installation for intelligent power management and cooling your Raspberry Pi.
  • Supports X708 UPS and battery holder installation for UPS....
  • Case Size(Installation): 11.4cm x9.5cm x 5.5cm / 4.48inch x 3.74inch x 2.16inch.
  • Note: there is no switch port on X857 V2.0/X862 V2.0, the momentary power switch in the X875-C3 can only work with X735/X708..
Check Stock

Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY

  • ...5.8G WiFi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also MUST format the new SSD before use..
  • √X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk..
  • √ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
  • √ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
  • Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
  • √ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
  • √ Allows booting OS from your HDD/SSD for faster app opens, web serving and file copyi....
Check Stock

DJI Phantom 4 Pro Plus V2.0 - Drone Quadcopter UAV with 20MP Camera 1" CMOS Sensor 4K H.265 Video 3-Axis Gimbal, Remote Controller with 5.5" Screen, White (CP.PT.00000234.01)

  • The Phantom 4 Pro+ V2.0 camera drone comes equipped with a 3-axis motorized gimbal and a 1-inch 20MP CMOS sensor with a mechanical shutter that eliminates rolling shutter distortion..
  • With the 5.5-inch 1080p LCD screen built into the optional remote controller, your images are easily visible even in direct sunlight..
  • The Phantom 4 Pro V2.0 is a beast when it comes to flight performance. It has a maximum flight speed of 72 kph and an 8km transmission range with 1080p livestreaming and automatic frequency switching thanks to OcuSync 2.0..
  • The Phantom 4 Pro V2.0 offers Intelligent Flight Modes such as TapFly, ActiveTrack, Draw mode, Gesture mode, and more. Draw lets you control the flight path with a fixed altitude simply by creating a route on the screen..
  • What you get: DJI Phantom 4 Pro+ V2.0, Remote Controller with 5.5" Screen, Intelligent Flight, Battery, Charger, Power Cable, 4x Propellers (pair), Gimbal Clamp, microSD Card (32GB), Micro USB Cable, Carrying Case.
Check Stock

Lizard Skins 0.5mm Lacrosse Grip Tape USA Independence V2 Slip Resistant - 39 Inches - 99cm - Fits Any Lacrosse Stick – LAX Stick Grip Tape

  • Version 2 of our signature Lacrosse Grip is finally available, introducing the Lizard Skins 0.5mm Lacrosse Grip Tape V2. Our Lacrosse grip tape is designed to improve the feel and improvement of any lacrosse stick..
  • Represent the Stars and Stripes with our USA Independence Grip! The Lizard Skins 0.5mm Lacrosse Grip V2 is designed to also reduce the wear in the palm of your gloves..
  • We designed our V2 Lacrosse stick grip tape with feedback from hundreds of professional lacrosse players and the lacrosse community. Our version lacrosse grip was already one of the most used grips in Lacrosse but we saw the improvement and changes that needed to be done and we implemented them and the Lacrosse athletes we showed love our are V2 Lacrosse Grip Tape..
  • Our new texture combined with our DSP durasoft polymer grip creates the perfect balance of tackiness and mobility and it was designed based on a lacrosse player’s style of hand movement..
  • The Lizard Skins V2 Lacrosse Grip Tape is 0.5 millimeters thick and is 39 inches or 99cm long with precut ends and finishing tape. Our lacrosse grip tape is slip resistant and has a full adhesive back so putting the grip on is easy and the grip stays on through all conditions..
Check Stock

Professional Multi-System Auto Diagnostic Tool iCarsoft MB V2.0 Compatible for Mercedes-Benz / Sprinter / Smart, ABS SRS Oil BLD INJ

  • iCarsoft MB V2.0 scanners mainly works on OBD II Mercedes. MB V2.0 can work on engine system for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin black adapter for conversion. MB V2.0 can work on multi-system for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin red adapter for conversion..
  • iCarsoft MB V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

Fenix UC35 V2.0 1000 Lumen Rechargeable Tactical Flashlight with Two Rechargeable Battery and Lumen Tactical Organizer

  • UPGRADE FROM THE UC35 - The UC35 V2.0 is fitted with a CREE XP-L HI V3 LED to reach a maximum output of 1000 lumens and 291 yards of throw - that's 60 lumens brighter and 73 yards more throw than the UC35!.
  • DURABLE STAINLESS STEEL SIDE SWITCH - Control on/off output via a tactical tail cap while a new durable stainless steel side switch lets you adjust through 5 brightness outputs plus Strobe including the new 1 lumen moonlight mode. This mode is very useful for reading up close and nearly doubles the max runtime!.
  • SHORTER BODY FOR EDC CARRY - Almost half an inch shorter in length than the original, the UC35 V2.0 is perfectly suited for everyday carry whether you're a mechanic, police officer or outdoor explorer..
  • BUILT-IN USB CHARGING - An included rechargeable battery and a built-in USB charging port keep the UC35 V2.0 powered wherever you go. A boot up battery indicator lets you know how much power remains and charging indicator lights keep you informed throughout the charging process..
  • PREMIUM BUNDLE-Fenix UC35 V2.0 flashlight, pocket clip, two rechargeable batteries, USB charging cable, holster, lanyard, 2 spare o-rings, spare rubber boot, instruction manual, warranty card. Also includes Lumen Tactical battery organizer.
Check Stock

Nikon Coolpix L110 Digital Camera Accessory Kit Includes: SB251 Charger, KSD2GB Memory Card

  • ...nce your shots to bring your photography to the next level. Included 58mm Accessories are compatible with 58MM Lens Threads on Canon models including: EF-S 18-55mm f/3.5-5.6, EF-S 18-55mm f/4-5.6, EF-S 55-250mm f/4-5.6, EF 50mm f/1.4, EF 75-300mm f/4-5.5. Everything backed by a 1 Year Warranty. The bundle features:.
  • Commander 3 Piece Filter Kit & 4 Piece Macro Kit protects lens from dust, moisture, drops, scratches & provides essential photo enhancements: UV Filter- absorbs ultraviolets & reduces bluish cast, Circular Polarizer Filter- reduces reflections/glare, haze effect from sunlight, increases saturation, FLD Filter- reduces green tinge when shooting under fluorescent lighting. Macro Kit includes +1, +2, +4, +10 Macro Close-up Lens- take high detail shots at enchanced zoom levels..
  • Commander 58mm 2.2x Telephoto Lens offers a 2.2x magnification for narrower field of view. Commander 58mm 0.43x HD Wide Angle Lens expands the field of view of the camera lens by an angle of view 43% wider than the host lens..
  • Deluxe Camera Case, LP-E10 Replacement Battery, SanDisk 32GB Ultra Class Memory Card, 50 Inch Tripod, Wired Remote, Commander High Speed SD Card Reader, Commander Wrist Grip Strap, Lens Cleaning Blower and Brush, USB File T....
Check Stock

Lizard Skins 0.5mm Lacrosse Grip Tape V2 Solid Slip Resistant - 39 Inches - 99cm - Fits Any Lacrosse Stick – LAX Stick Grip Tape (Green)

  • Version 2 of our signature Lacrosse Grip is finally available, introducing the Lizard Skins 0.5mm Lacrosse Grip Tape V2. Our Lacrosse grip tape is designed to improve the feel and improvement of any lacrosse stick..
  • We designed our V2 Lacrosse stick grip tape with feedback from hundreds of professional lacrosse players and the lacrosse community. Our version lacrosse grip was already one of the most used grips in Lacrosse but we saw the improvement and changes that needed to be done and we implemented them and the Lacrosse athletes we showed love our are V2 Lacrosse Grip Tape..
  • Our new texture combined with our DSP durasoft polymer grip creates the perfect balance of tackiness and mobility and it was designed based on a lacrosse player’s style of hand movement..
  • The Lizard Skins V2 Lacrosse Grip Tape is 0.5 millimeters thick and is 39 inches or 99cm long with precut ends and finishing tape. Our lacrosse grip tape is slip resistant and has a full adhesive back so putting the grip on is easy and the grip stays on through all conditions..
  • Our newest lacrosse grip comes in solid colors and camo colors and fits any lacrosse stick. The Lizard Skins 0.5mm Lacrosse Grip V2 is designed to also reduce the wear in the palm of your gloves..
Check Stock

ThermalTake COMMANDER F6 RGB FAN-CONTROL, AC-024-BN1NAN-A1 (FAN-CONTROL)

  • 16 RGB Multi Colours - Choose from 16 screen display colours to add aesthetics to go. With its sturdy frame and reliable inner system, Commander F6 RGB is an ideal device to monitor the temperature inside the chassis and control the fan speed..
  • Adjustable Output Voltage (0V-12V) - Unlike other fan controllers on the market, the Commander F6 RGBs control knobs allows you to adjust the voltage with precision (voltage range: 0.1V)..
  • Thermal Monitoring - The Commander F6 RGB helps you keep an eye on temperature, giving you details down to the selected fan speed (RPM). Choose Celsius or Fahrenheit according to your preferences. The embedded temperature warning alarm can also be set, so that you can stay in control..
  • Comprehensive Cooling Performance and Noise Control - Featuring six 30W separate fan control channels, the Commander F6 RGB lets you adjust the speed of any type of fan, giving you precise cooling control with minimal noise..
  • Warning Alarm and Short Circuit Protection - The built-in alarm function warns you if any component gets overheated or if the fan fails..
Check Stock