Best Collet Chuck Set

Starrett 166C Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0.050 - 0.125\ (3.21mm) with Insulated Octagonal Handle for Shock Protection, Tapered Collet

  • NoN-ROLLING OCTAGON SHAPE: The Starrett 166C Pin Vise has an Octagon-shaped handle that prevents the tool from rolling when it’s set down..
  • HOLDS UP TO 3.2 MM: This model pin vise securely holds workpieces sized between 0.050" - 0.125" (1.3mm - 3.2mm), including small stock, taps, drills, reamers, scribers, wire, small files, and other tools..
  • SHOCK PROTECTION: This pin vise features an insulated PVC handle, which protects the user from electric shocks..
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces..
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface. Measurements are 2-5/32" handle length and 3-55/64" overall length with chuck closed..
Check Stock

3M Mini Mandrel 935, 2-7/8 in x 1/4 in

  • Grips abrasive allowing you to reach tight internal diameters.
  • Versatile mandrel holds a 1inchwide strip of ScotchBrite nonwoven material, cut to the length needed for the application.
  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool.
  • Shank fits a 1/4 inch power tool collet or drill chuck.
Check Stock

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

  • ... forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet in....
Check Stock

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • ...s to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet in....
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

3M Cartridge Roll Mandrel - Attaches Abrasive Cartridge Roll to Die Grinder - Power Tool Accessory - 1/8\ x 1\ x 1/4\ - 45119

  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool.
  • Mandrel enables access to tight spaces with a cartridge roll.
  • Comes in various pilot diameters and lengths to fit different cartridge rolls.
  • Shank must match the size of the power tool collet or drill chuck.
  • Pilot diameter must match size of cartridge roll.
Check Stock

Starrett 162A Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0-0.040\ (1mm) with Tapered Collet, Knurled Rings, Nickel Handle

  • FINGER ROTATING DESIGN: The Starrett 162 Pin Vise features small handles that allow you to rapidly rotate between thumb and finger when filing small work.
  • HOLDS UP TO 1 MM: This model pin vise securely holds workpieces up to 0.040" (1mm) in diameter, including small stock, taps, drills, reamers, scribers, wire, small files, and other tools.
  • PREMIUM HOLDING DEVICE: Knurled rings and handle provide a secure grip, and the nickel plated handle and binding nut offer last-lasting durability and wear-resistance.
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces.
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface Measurements are 1-11/16" handle length, 3/16" handle diameter, and 3-3/32" overall length with chuck closed.
Check Stock

Accusize Industrial Tools Mt3 Shank Er32 Chuck with 11Pc Collets Kit 1/8 - 3/4 by 16Th Morse Taper Collet System 0223-0304

  • 11pc ER32 collet set : 1/8" - 3/4" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"). For machining tools such as end....
  • All collets are made of high quality alloy spring steel. 0.0005" accuracy..
  • 1pc MT3 shank ER32 collet chuck. Drawbar threads 1/2" x 13.
  • 1pc ER32 spanner. Run-out Tolerance: 0.0005"..
  • Hardened and precision ground. The actual runout is 0.00031".
Check Stock

6 Packs 1/4\ To 1/8\ Collet Adapter for CNC Lathe Router Cutter Milling Bit Collet Reducer

  • Fitment: Fit any grinder that uses a 1/4" collet,for CNC machine tool chuck conversion,the conversion size is 1/4" to 1/8"..
  • Material: Be made of high performance Spring Steel,these adapter collets are extremely well made and firmly hold 1/8" bits in the router firmly and precisely..
  • Function: Reduce collet size and is a snug fit with the smaller bit.The best centering 1/4 x 1/8 inch reducing collet since it has 3 slits like a milling machine collet..
  • Tips: If you ever have any issues, simply contact us for a free replacement or refund. We support 24 hours online customer service..
Check Stock